|
|
Processing and properties of transparent polycrystalline ceramic materials
Tásler, Jan ; Pouchlý, Václav (referee) ; Maca, Karel (advisor)
The presented diploma thesis is focused on the preparation and properties of transparent polycrystalline ceramic materials based on Al2O3. Theoretically, the most important technological aspects of the processing of these materials are presented. Detailed attention is given to transparent Al2O3 polycrystalline ceramics doped with rare earth elements. The influence of microstructural parameters on the optical properties (represented by RIT) is investigated on Al2O3 samples doped and codoped with dysprosium, terbium and chromium. A significant effect of the average grain size on the light transmittance of all samples is observed. The highest RIT = 55 % (measured by a laser beam with a wavelength of 632,8 nm) was achieved by an optimized preparation process for a sample doped with 0,05 at. % of dysprosium. For all samples photoluminescent properties are also analysed. The photoluminescent emission spectra correspond to the activation of doping elements. In case of the terbium and chromium codoped samples, the differences in the activation of individual dopants depending on different excitation wavelengths were demonstrated, resulting in different colour emissions for different excitation wavelengths.
|
|
|
Automatisation of an experimental setup for optical spectroscopy
Hrabina, Jakub ; Gallina, Pavel (referee) ; Dvořák, Petr (advisor)
This bachelor thesis deals with the development and description of an application that enabled full automation of an experimental assembly for spectral mapping using confocal optical microscopy. It presents communication with all individual devices and explains the principle of data collection from the examined sample and their subsequent mathematical processing. The output of this application is the visualization of 2D spectral maps evaluating the intensity and position of spectral peaks, with the possibility of exporting user-friendly point spectra. In addition, the work further describes a research study of optical confocal spectroscopy with applications to nanophotonics. In addition, the functionality of the whole application is demonstrated on the spectral response of a 2D metasurface, which acts as a Bayer mask.
|
|
|
Optical characterization of perovskite nanostructures
Urban, Jakub ; Kvapil, Michal (referee) ; Dvořák, Petr (advisor)
The present bachelor's thesis focuses on the optical characterization of CsPbBr3 nanocrystals ranking among the group of materials called perovskites which are remarkable for their high photoluminescence (PL) quantum yield. An algorithm for a correlation of experimental data measured by PL mapping with morphological and topological properties obtained by using Scanning Electron Microscopy and Atomic Force Microscopy has been developed which clears the way for a particular crystal detection and their spectrum analysis. Specifically, crystals the shape of which can be approximated by a cuboid have been detected and the volume dependence of the centre of mass of their PL, which is proportional to V^(-2/3) as predicted by the theorethical model, has been discovered. The measurement of PL dependency on temperatures ranging from 40 to 60 °C has also been conducted and in this temperature interval linear dependence of the full width at half maximum of their PL spectral line that rises with rising temperature has been confirmed. On the contrary, the centre of mass of PL has been found to be temperature independent.
|
|
|
Integration of nanostructures into functional devices
Citterberg, Daniel ; Mikulík, Petr (referee) ; Kolíbal, Miroslav (advisor)
This master thesis is focused on characterization of electrical transport properties of one-dimensional nanostructures. First section of this work deals with theoretical description of the experimental approaches to realization of such measurements. This section involves also a detail discussion of preparation of contacts using e-beam lithography. Next, theoretical description of characterization of nanostructures using photoluminescence measurements is given. Second section describes practical application of the aforementioned electrical transport measurements. Presented results include transport and photoluminescence measurements of WS2 nanotubes, InAs and WO2.72 nanowires. The last section of this thesis deals with nanowire quantum well heterostructures. The section provides both a deeper theoretical view of the problem and results of the photoluminescence measurements are shown.
|
|
|
Luminescence of semiconductors studied by scanning near-field optical microscopy
Těšík, Jan ; Klapetek, Petr (referee) ; Křápek, Vlastimil (advisor)
This work is focused on the study of luminescence of atomic thin layers of transition metal chalkogenides (eg. MoS2). In the experimental part, the work deals with the preparation of atomic thin layers of semiconducting chalcogenides and the subsequent manufacturing of plasmonic interference structures around these layers. The illumination of the interference structure will create a standing plasmonic wave that will excite the photoluminescence of the semiconductor. Photoluminescence was studied both by far-field spectroscopy and near-field optical microscopy.
|
|
|
The deposition of Ga and GaN nanostructures on silicon and graphene substrate
Novák, Jakub ; Jarý, Vítězslav (referee) ; Mach, Jindřich (advisor)
The thesis is focused on the study of properties of GaN nanocrystals and Ga structures on the surface of silicon and graphene substrate. In the theoretical part of this thesis, the basic properties of Ga/GaN and graphene are described, as well as their applications or connection of both structures together in different devices. The ability of metal nanoparticles to enhance not only photoluminescence, due to the interaction of the material with surface plasmons, is also shown in several examples. The experimental part of the work first deals with the production and characterization of graphene sheets prepared by Chemical Vapor Deposition. Ga/GaN growth on both types of substrates was performed in a UHV chamber using an effusion cell for Ga deposition and an atomic ion source for nitridation. Prepared structures were characterized using various methods (XPS, SEM, AFM, Raman spectroscopy or photoluminescence). In the last step, GaN nanocrystals were coated with Ga islands to study the photoluminescence enhancement.
|
|
| |
|
|
Raman assembly for radiation analysis
Stránská, Lenka ; Ježek, Jan (referee) ; Dostál, Zbyněk (advisor)
For Raman spectroscopy is a need to introduce a laser light into an optic fiber and analyze a collected light at the same time. Therefore it was proposed a specialized optical system. This system can also be used to measure other spectroscopy methods such as photoluminescence. In the theoretical part of this theses, was discussed both mentioned methods and their instrumentations. In addition to the Raman spectroscopy, was also shown some special cases of Raman spectroscopy for enhanced measurement of Raman scattering. The problem of weak signal detection and its reading is also discussed in the theoretical part of the thesis. In the practical part of this thesis was discussed the mechanical design of the optical system and the choice of optical elements that are used in the system. Next, is introduced the manufactured system, which design is based on the parameters of the chosen optical elements. The practical part of the thesis ends with an assembly and testing of the proposed system.
|
|
|
Characterization backsides of solar cells
Winkler, Luděk ; Vaněk, Jiří (referee) ; Dolenský, Jan (advisor)
This thesis deals with the characterization back side of solar cells. In order to describe the quality of material from the point of view of a back side solar cell, the method of photoluminescence, the method of light emitting from micro plasma and LBIC (Light Beam Induced Current) is used. Gained results are compared with the results of front side analysis. Next, the thesis describes back side potential.
|
|
|
Photoluminescence diagnostic method with transmission illumination
Kafka, Martin ; Veselý, Aleš (referee) ; Vaněk, Jiří (advisor)
The aim of this diploma thesis is an innovation of photoluminescence measure research workplace for measurement of cells structure defects by method of transmissive illumination while employing the current methods of measurement of defect in the solar cells structure. The first part deals with explanation of historical development of solar energy, of how we can reach production of electric power with contribution of solar radiation and defines usability of solar cells in practice. The thesis further analyses a practical application of measurement via laboratory diagnostic methods used by Department of Electrotechnology Brno University of Technology. The second part is focused on mechanical design of experimental photoluminescence measure workspace used for quick diagnostic defects employing the rear arousing source for detection of defects with assistance of transmissive system of illumination. Finally, with co-operation of SOLARTEC s.r.o. three types of solar cells are measured by this new method and compared with results of measurement via diagnostic methods of LBIV (Light Beam Induced Current), LBIC (Light Beam Induced Voltage), Electroluminescence, Photoluminescence, and detection defects by radiation of Microplasma.
|
guest ::
