|
|
Equipment for testing of thermoelectric modules
Frank, Vojtěch ; Šnajdárek, Ladislav (referee) ; Pospíšil, Jiří (advisor)
Goal of this thesis is to specify needed upgrades of current aparatus used for measuring parameters of thermoelectic modules, witch was constructed at the Enegry institute of Faculty of Mechanical Engineering, Brno University of Technology. In this theseis current state of aparatus where reviewed and specifications for updates where made. These specifications where used to create plans for new aparatus. Quality of designed aparatus where verified by simulations made in ANSYS. Plans for proposed aparatus where made.
|
|
|
Determination Parameters of Synchronous Machines according to Measurement
Hrtáň, Michal ; Vaněk, Jaromír (referee) ; Hájek, Vítězslav (advisor)
This "Determination Parameters of Synchronous Machines according to Measurement" bachelor thesis describes methods of tests necessary to determine loss and efficiency of electrical machines with focus on synchronnous ones. It determines calculation procedures for evaluating the measurements. Furthermore, it deals with measuring mechanical vibrations and noise of an electrical machines. Definitions of given tests are written up with regards to contemporary norms. From above mentioned information comes a serviceable tool for automatic measurement protocol generation, which is an electronic form. The measured values are the input of the form. The output of the form is the measurement protocol with results of calculation and graphs of characteristics. For the thesis purposes, the form was filled in with acquired values from tests of a specific synchronnous machine. The related calculations for determining the machine parameters are stated.
|
|
|
Wireless Sensor Network with Static Topology for Building Monitoring
Koudelka, Jan ; Žák, Jakub (referee) ; Samek, Jan (advisor)
This bachelor's thesis is focused on realization of wireless sensor network (WSN) for buildings monitoring and real-time obtaining of data. Just for work on this project the micaZ sensor nodes have been chosen. The main task is to create WSN with a static topology and some communications mechanism. That network consists of several nodes, and there is a special one called base station. It also has a special function, different from the others. The function is that the base station is collecting data from all of the nodes and sending them to a computer through an USB port. In addition to designing the network topology the other tasks are to implement a comunication protocol and to create computer application and application for sensor nodes. Data will be visualised in text and graphical form. Moreover there are some information about the simulation tool called TOSSIM which allows testing applications without having a physical access to micaZ sensor nodes.
|
|
|
New electrode structures for alkaline accumulators
Fusek, Petr ; Novák, Vítězslav (referee) ; Vrbický, Jiří (advisor)
Master´s thesis is focused on development of electrodes used in alcaline accumulators, by using new kinds of materials and compounds. Basic possitive eletrode was made of nickel, on this electrode were applied new layers of Ni(OH)2 by using the method called electrodeposition. For electrodeposition was used solution with Ni(NO3)2 in diverse concentrations. Later on, this material was enriched with aluminium admixtures to increase stability of alfa modification in Ni(OH)2. These concentrations were measured and analysed in diagrams. For measurement was used device Biologic. The diagrams were commented with recommendations for production use in accumulators.
|
|
|
Creation of the thematic map in Microstation
Valachovič, Patrik ; Berková, Alena (referee) ; Ježek, Jiří (advisor)
The final bachelor work aims to create a map of a city district Brno-Líšeň in map scale 1:500. Bachelor work is divided into four chapters. The first chapter describes the characteristic of measured methods that were used. The second chapter is about measurement preparation and work materials. The third chapter describes the processing part of the calculation of measured data in a programming environment Groma v.11. Finally, in the fourth chapter, there is a graphic part which is situated in a programming environment MGEO and Microstation V8i.
|
|
|
FTTB Network Design
Reichert, Pavel ; Křepelka, Václav (referee) ; Filka, Miloslav (advisor)
The purpose of this master’s thesis is to explain the issues of the FTTx network design. The main idea of this work is to describe to readers the methods of the designing the optical access networks. Especially we will speak about the building technologies and different topologies used in a practice. The different technologies of optical access networks’ building and various parameters, which are necessary to take into account in the designing of these networks, will be introduced. In the theoretical part, methods of measurement, which are like the needed part of each optical access networks’ building, will be described. Two purposes of the FTTB networks with all proprieties will be made and offered. One purpose will be solved by Point to Point topology and the second purpose will be solved by Point to Multipoint topology. Following the confrontation one of these purposes will be chosen and realized. By ITU recommendation, measurements will be performed on the built optical trace. The final protocols will be elaborated from these measurements. The built trace with all final reports will be prepared for assignment to the subscriber.
|
|
|
FTTx network design
Tejkal, Vladimír ; Němec, Karel (referee) ; Reichert, Pavel (advisor)
The main goal of this diploma thesis was to implement the proposal of optical access networks in the selected location. Introduce is focused on the physical layer of network. This includes optical fibers, optical cables, connectors, optical splitters, and more. According to the place of termination of optical fiber will be studied best FTTx connections. According to network topology distinguished point to point and point to multipoint network. Networks points to point are also known as an active optical network and for each user are restricted to a separate fiber. Point to multipoint networks known as passive optical network. In terms of the PON is defined by many standards. For a selected location will be choice the most appropriate solution. Finally, the measurement will be made and will be considered for monitoring the route. Before the design of optical access networks, I made an illustrative simulation in program OptSim. Performed simulations helps to study the transmission characters of optical networks, depending on the physical architecture. In general, for the design of high-capabilities networks for large companies will be more appropriate active topology that provides due wavelength multiplexes high transmission capacity. To join in the urban areas with a large number of separate houses, it is more appropriate use of passive topology. For the design of optical networks has been selected location with multiple housing buildings. The end customer is not given the requirement for high data transfer rates as large companies. For the proposal was selected FTTB networks which is suitable because of lower costs. The second variant of the proposal was a passive optical network according to standard GPON. This standard was chosen because of the high splitting ratio. For both solutions was developed the entire proposal by ITU-T with a detailed drawing documentation. In the selected area was conducted measuring the optical networks in order to verify the possibility of extension actual solutions. For a sample issue of measurements, I made several measurements using optical reflectometer over an optical splitter in order to prove the need for measurements during construction. FTTH networks gaining in popularity more and more, but price is the limiting factor.
|
|
|
Noise Generated by Turbochargers of Internal Combustion Engines
Kříž, Radim ; Novotný, Pavel (referee) ; Doman, Jozef (advisor)
This bachelor thesis is focused on generated noise by turbochargers of internal combus-tion engines. First, construction of turbochargers is described. The next part deals with the term sound and after that the issue of the noise in turbochargers follows. Consequent there are characterized experimental and simulation methods for determining the noise. The last part is focused on design modifications of turbocharger’s parts. The goal of this thesis is make research about origin of the noise by turbocharger during working conditions and design modifications which affect the noise.
|
|
|
The Design of FTTH Network
Zorgani, Nagib Youssef ; Křepelka, Václav (referee) ; Filka, Miloslav (advisor)
The aim of this thesis is to explain the problems of optical access networks with wavelength division multiplexers, main purpose is to demonstrate the difference between theoretical and real measurement. The work is divided into several thematic areas. The introduction outlines the basic of telecommunications, fiber optics lasers, single mode, multimode, lasers fibers cables & cores, splitters division multiplexing system, there are known solutions discussed fundamental wavelength multiplexes and their possible combinations. The following chapter deals with the active elements such as AON, PON, which are essential part xWDM systems such as optical lasers, detectors and amplifiers. Another chapter focuses on passive elements, which form a key part of the wavelength multiplex. Methods of measurement of WDM/PON networks are discussed in the following part. The next section describes the topology used active and passive optical networks. The penultimate part of the work consists of architecture & technology of xWDM such as GPON and WDM-PON networks and comparing their transmission parameters. The final part of the paper presents the results of practical experimental measurements of optical access networks with wavelengths division multiplex while these results are compared with the theoretical output & methods of Optical lost test, OTDR & LSPM, with advantage & disadvantage of every methods. The second part of practical is the draft to the connection resident housing units of 30 houses, boarding-house (10 rooms) and 2 shops, 20 km distant from exchange. With comparing the possibilities of two options- passive and active optical network- PON system – WDM- Wave multiplex. Suggest the possibility of measuring and monitoring the created network.
|
|
|
Analog I/O card with Ethernet
Pelikán, Radek ; Šedivá, Soňa (referee) ; Bradáč, Zdeněk (advisor)
The aim of my master‘s thesis was design of analog measuring card with generator and Ethernet interface, based on RCM3200 Rabbit Core module. I described this module, introduced the conception and the design of the measuring card. In appendix I stated design of schematic, design of board. I tested functionality of the measuring card.
|
guest ::
