|
|
Roof beam in the industry hall
Šnobltová, Simona ; Bobek, Lukáš (referee) ; Klusáček, Ladislav (advisor)
The bachelor’s thesis deals with the assessment of the existing roof girder in the industrial hall and subsequent outline of strengthening this construction. The girder is located in an industrial hall in Lanškroun and its original design is dated from 1998. Nowadays, cracks appear on the girder, therefore it is necessary to reassess it according to the current valid standards ČSN EN. The girder is appraised for the ultimate limit state, thus for bending and shear, and also for the serviceability limit state, thus for the pressure limit, width of cracks and transformation. Due to the fact, that not all assessments pass, hence a suitable structure strengthening with a MonoStrand prestressing strands is designed and the construction is reassessed again. For the control of a manual calculations of the internal forces on girder, was created a structural model in a program called Scia Engineer.
|
|
|
Adaptation and modification of the industry hall
Benda, Lukáš ; Hejl, Jaroslav (referee) ; Klusáček, Ladislav (advisor)
The master’s thesis is focused on a design of reinforced concrete refabricated skeleton of the industrial hall. Object of the design are two internal traverse frames of the hall which consists of reinforced concrete truss, columns, girder and concrete flat foundation. Thesis includes working-out of static calculation, elaboration drawings of shape, reinforcement of solved elements and evolvement of assembly drawings. The rest of the project parts are not analyzed.
|
|
|
Sanitation installation and gas installation in a factory unit
Maslík, Michal ; Vališ, Ivan (referee) ; Vrána, Jakub (advisor)
This thesis deals with health - technical and gas pipeline installations in the industrial hall. The building is situated in Frydek Mistek. The theoretical part compares the applicable technical rules for gas in Slovakia and the Czech Republic. The work also deals with the issue of determining the size of the reservoir water heater in several variants and compared to surveys by the use of hot water in similar objects. The design part is then developed addressing health - technical and gas pipeline installation for the specified object of the industrial hall.
|
|
|
Production of women´s clothing
Šťastná, Vladimíra ; Svoboda, Jiří (referee) ; Nový, Alois (advisor) ; Donaťáková, Dagmar (advisor)
The theme of my bachelor project is design of industrial factory producing women´s clothing in Brno – Zidenice. Building site in sloping terrain is used for right orientation of 3 buildings – an industrial hall, an affiliated storehouse and an auxiliary technic base. Part of the industrial hall is cantilevered and also the orientation reacts with the environs. Main ideas were to use the view and to group building to optimize producing process, also to build up satisfactory base for employees, as well as to impress people inside and outside the factory.
|
|
| |
|
|
Woman´s Clothing Factory
Cahová, Barbara ; Štikar, Jaroslav (referee) ; Nový, Alois (advisor) ; Donaťáková, Dagmar (advisor)
The study of women's ready to wear clothers solves new manufacturing and administrative area located in an appartment neighborhoods, a cemetry with crematorium, an army base and wooded park Akatky in Brno, Zidenice. The structure is incorporated into slightly steep terrain close to current buildings and freely exemplifies them with it's spacious composition. The building is separeted into two functional units, one smaller structure and other larger. The first one contains the company's administration, restrooms and dining area. All of the warehouses are in the other part-essential materials, final products, cutting area, futhermore hardware rooms and at last the production hall itself. There are parking lots, pedestrian areas and green areas with planted trees to be used in summer months for short rest.
|
|
|
Distribution warehouses in Prague - construction technology project
Lupač, David ; Selník, Petr (referee) ; Vlčková, Jitka Laura (advisor)
The subject of this thesis is the construction and technological project for distribution warehouses in Prague. Textual part contains a technical report on construction technology project, wider relations of traffic routes with marked critical points, the study of the main technological stages of the building, principles of organization of construction, design of the main building machines and mechanisms, technological regulations, inspection and test plans, health and safety on the site. In the section with attachments there is a map of the locality, drawings of site facilities, including road signs, charts of the movement of machines, the schedule of the main building structure, the budget of the main building structure, a plan for securing material resources, time and financial plan, an economic evaluation of site facilities, details and other technical documentation stages.
|
|
|
Building survey and evaluating the state of construction
Štěpánek, Jakub ; Komárková, Tereza (referee) ; Heřmánková, Věra (advisor)
This diploma thesis is focused on building survey and evaluating the state of existing constructions. Process of evaluating the state of existing constructions and selected diagnostic methods are described in the theoretical part. The practical part is dealing with performed structural and technical survey of two industrial structures including evaluation of the strength of concrete and verification of the reinforcement. The final part includes assessment of both of the evaluated structures.
|
|
|
Steel structure of an industrial building
Jílek, Josef ; Puchner, Josef (referee) ; Sýkora, Karel (advisor)
This thesis deals with structure of the single-aisle steel industrial hall in accordance with the arrangements of the building with a span of 30 m, a height of 84 m and corresponding height of the cantilever of a crane track girder is 9,0 m. In the hall are considered two cranes with a capacity of 50/12,5 t and 32/8 t. The main bearing element is formed by lattic truss stored on solid pillar down anchored in transverse direction. Distance of transversal pillars is 12 m and between them designed hanging purlins. The structure is designed for the district of Brno.
|
|
|
Technology and Innovation Centre Telč
Abrhámová, Tereza ; Suchánek, Petr (referee) ; Nový, Alois (advisor) ; Donaťáková, Dagmar (advisor)
The aim of the thesis was drafting of a technology and innovation centre in the developing area of city Telc -in the borough called 'Za Stinadly'. Objects, which are designed for various operations of small and medium enterprises, cover the maximum of provided area and their layout fully respects the contour lines. The entrance into the area is provided from the Trebicska street and the conflict-free movement of persons and vehicles is secured, too. Production units are divided into two types. The thesis is aimed on the production unit of type A with the production area of 75m2. Each unit has facilities for ten employees and consists of an office and an industrial hall. Important requirement was the variability of space. Units are connected to the endwise set of twelve, therefore they are dispositionally linked and easily connectable according to the customer's needs.
|
guest ::
