|
|
Design of structures with FRP reinforcement
Matušíková, Anna ; Vácha, Jaroslav (referee) ; Štěpánek, Petr (advisor)
This diploma thesis presents available FRP software for calculating load bearing capacity of the structures reinforced with FRP and compares them between each other. Furthermore theory and algorithm of my own software is presented here. Load bearing capacity of structures which are reinforced with non-metallic reinforcement and loaded by combination of normal force and bending moment can be solved by my programme. Effects of high temperatures on the concrete structures can be included in the calculation. In the second part of the thesis is calculated load-bearing capacity and deflection of the real beam reinforced with FRP reinforcement and load-bearing capacity of member with FRP reinforcement with effect of elevated temperature. This has been done using my software. Comparison of results from hand calculation and laboratory load-bearing testing is done at the end. This laboratory testing was accomplished by Institute of Concrete and Mansory Structures at our faculty.
|
|
|
THE APPLICATION OF NANOMATERIALS FOR LEAD FREE SOLDERS DEVELOPMENT
Pešina, Zbyněk ; Pinkas, Jiří (referee) ; Spousta, Jiří (referee) ; Sopoušek, Jiří (advisor)
The present dissertation is motivated by the search for alternatives of lead-free soldering by nanoparticles of metals and their alloys. The research focuses on the possibility of replacing lead-free solders by nanoparticles. This issue is currently being addressed by the use of lead-free solders but their properties are not entirely equivalent to properties of lead-tin based alloys. The theoretical part of the dissertation first summarizes up-to date knowledge on the development of lead-free alloys currently used for soldering in the electronics. The work compares these lead-free solder candidates with previously used Pb-Sn alloys. The second section of the theoretical part is devoted to nanotechnology that offers possible solutions of problems associated with the use of lead-free solders. The text contains a description of the properties of nanocrystalline materials in comparison with those of compact alloys having the same chemical composition. The possibility of preparation of nanoparticles and potential problems associated with small particle sizes are also presented. Introduction of the experimental part focuses on the preparation of nanoparticles of pure metals and alloys by chemical and physical ways as well as on an instrumentation for characterisation and analysis. Attention is focused on the silver in nanoparticle form that exhibits the low temperature sintering effect, which is thermally activated by decomposition of oxide envelope covering the Ag nanoparticles. This factor is critical for low-temperature sintering and thus also for possible future applications. The thermal effects of the low sintering process were studied by methods of thermal analysis. The preparation of the Cu / Ag nano / Cu joints was carried out in-situ in inert atmosphere and under the action of atmospheric oxygen. In both cases varying conditions of thermal treatment were used. The cross sections of the prepared joints were then used for the metallographic analysis of the local mechanical properties of the resulting silver layer, for the chemical composition evaluation of the resulting layers of the joint, and for the microstructure study. Strength characteristics are represented by testing shear strength of individual joints.
|
|
|
Analytical methods for determination of polyhydroxyalcanoates content in bacterial cells
Černayová, Diana ; Enev, Vojtěch (referee) ; Sedláček, Petr (advisor)
This bachelor thesis deals with methods that are used for determination of polyhydroxyalkanoates (PHA) in cells of bacteria Cupriavidus necator H16. To the applied methods belong Fourier transform infrared spectroscopy, Raman spectoscopy, turbidimetry and thermal analysis (thermogravimetric analysis and differential scanning calorimetry). The results of each method were compared to amount of PHA determinated by gas chromatography. Fourier transform infrared spectroscopy and Raman spectroscopy revealed a linear relation between ratio of characteristic peaks and amount of PHA. FTIR enabled to determine not only the quantitative amount of PHA, but the quality of the sample (cristallinity, amorphous state) as well. Another method was turbidimetry, which has shown correlation between dispersion of UV-VIS light to amount of PHA in bacterial cells. Thermogravimetric analysis was the most effective technique for determination of PHA. The dependence of weight loss of PHA on its content (found by gas chromatography) was determined with the highest accuracy to gas chromatography. Tha last method- DSC was not alternative replacement for quantitative PHA determination. However, DSC indicated crystalline and amorphous state of the polymer.
|
|
|
Combined heat and power generation
Hlaváč, Ivan ; Zálešák, Martin (referee) ; Klimeš, Lubomír (advisor)
The bachelor thesis deals with the power generation by means of a combined gas-steam cycle. In the first part of the work, an overview and description of the combined cycle as well as of the Brayton cycle and the Rankine cycle are provided. The second part of the work focuses in the thermal analysis of the cycles. As a part of the work, a computer program was created, which allows for such thermal analysis of the combined cycle.
|
|
|
The hydration of hyaluronic acid
Průšová, Alena ; Šimon, Peter (referee) ; Kučerík, Jiří (advisor)
Hydratace patří mezi nejdůležitější faktory ovlivňující sekundární strukturu a tím i funkci molekul v živých systémech. Díky vysoké afinitě tvoří molekuly vody specifické struktury jejichž složení a fyzikální vlastnosti jsou ovlivněny přítomností studované látky. Hyaluronan patří mezi biomolekuly s obrovskou schopností vázat a zadržovat vodu. Cílem této práce bylo prozkoumat hydratační vlastnosti hyaluronanu o různé molekulové hmotnosti a vyčíslit množství molekul vody v jednotlivých hydratačních vrstvách. V první části práce byla využita metoda diferenční kompenzační kalorimetrie. V druhé části diplomové práce, na základě rozdílné kompresibility, byla vázaná voda studována metodou vysoko rozlišovací ultrazvukové spektroskopie.
|
|
|
Thermal effects in machine tools
Fikejsl, Ondřej ; Štěpánek, Vojtěch (referee) ; Hermanský, Dominik (advisor)
This bachelor’s thesis is specialized search dealing with thermal effects in machine tools and then their compensation. This work is divided into three main parts. First part explains the basic terms and temperature sensors that can be used to measure thermal errors. Second part deals with the thermal influences acting on machine tool, as well as the methods of their compensation. Last part analyzes the specific part of the machine tool including the examples from the manufacturers and their methods of preventing the above-mentioned thermal effects.
|
|
| |
|
|
Influence of bioplastics´ biodegradation on soil quality
Paluchová, Natálie ; Doležalová Weissmannová, Helena (referee) ; Kučerík, Jiří (advisor)
V poslední době se pozornost polečnosti obrátila k mikroplastům. Jsou produkovány různými odvětvími a šíří se napříč prostředím. Po dlouhou dobu byly považovány za inertní, bez dalšího vlivu na rostliny a jiné živé organismy, avšak jak zjistily nedávné studie, mohly by představovat vážnou hrozbu. Několik vědců, včetně nás, se proto začalo soustředit na jejich transport a transformace v životním prostředí. Většina se však zaměřuje pouze na jejich přítomnost v mořských a sladkých vodách, a proto jejich chování ve vzduchu a půdě zůstává nejasné. Kromě toho byla pozornost soustředěna i na bioplasty. Jsou prezentována jako ekologická alternativa, která má vyřešit všechny dosud zmíněné problémy (a další). Avšak často se zapomíná, že jejich hlavní výhoda může být zároveň nevýhodou. Z tohoto důvodu se tato diplomová práce zaměřuje na negativní účinky spojené s přítomností mikroplastů (konkrétně bioplastu poly-(R)-3-hydroxybutyrátu) v půdě jako jejich běžný receptor. Kombinovali jsme respirometrii, elementární analýzu, termogravimetrii a enzymatické testy, abychom zkoumali fyzikálně-chemické změny v půdě vyvolané přítomností bioplastu. Naše výsledky ukázaly negativní vliv na půdní organickou hmotu a zadržování vody v půdě. V tomto smyslu byl zkoumán i tzv. "priming effect", jelikož docházelo k urychlení a také zpomalení rozkladu půdní organické hmoty. Zaznamenali jsme rozdílný vliv vybraných koncentrací biopolymeru na půdu a také vliv půdních vlastností na průběh degradace. V neposlední řadě zvýšení enzymatické aktivity jasně naznačovalo vliv přítomnosti biopolymeru na mikrobiální komunitu. Na základě takových zjištění jsme došli k závěru, že přidání biopolymeru vede k dlouhodobému dopadu na řadu funkcí půdního ekosystému.
|
|
|
Thermal-Mechanical Analysis of the Cylinder of the Four-stroke Engine
Ptáček, Petr ; Raffai, Peter (referee) ; Dlugoš, Jozef (advisor)
This diploma thesis is focused on creating a finite element method model of a four-stroke engine with a purpose to determine an impact on cylinder bore distortion caused by several types of loading. Introduction of this work covers research of possibilities in modelling thermal-structural analysis of cylinder liner and verifications of the analysis results. An Ansys model was further created and cylinder liner radial deformation caused by head bolts tightening and thermal loading coming from combustion was determined. Finally, a whole engine working cycle was simulated with a gas pressure loading and its final impact on the total cylinder liner radial deformation was defined.
|
|
|
Determination of binary phase diagram
Dobeš, Pavel ; Havlík, Petr (referee) ; Jan, Vít (advisor)
This bachelor's thesis deals with the analysis and verification of binary diagram of the Ag-Sb system. The theoretical segment of the thesis describes the sub-elements of this system, the function of binary diagrams and the methods of thermal analysis. The experimental segment mainly deals with the interpretation of DSC signal, the analysis of the microstructures of specific Ag-Sb system samples and the comparison of the acquired data with the given binary diagram.
|
guest ::
