|
|
Communication devices over GSM/GPRS
Prečan, David ; Růčka, Lukáš (referee) ; Herman, Ivo (advisor)
This master thesis deals with a data remote transmission by means of SMS and GPRS technology. The overview of current solutions is presented and then a remote temperature measurement and a data transmission employing a communication module GSM/GPRS TM1 through GSM network using GPRS technology is described. As a response to an impulse, the communication module sends SMS. The technical solution is described in details including HW and SW design of the data transfer and processing equipment using a ATmega 162 microprocessor. This equipment communicates with a server (PC), which displays the measured temperature. A prototype which was used for a validation of the design is also described.
|
|
|
Wireless sensor network
Hruška, Martin ; Burda, Karel (referee) ; Mišurec, Jiří (advisor)
Wireless sensor network (WSN) consist of a mesh of a several powerful devices (denoted as base stations or sink) and a high number (1000 - 1000000) of a low-cost devices (denoted as nodes or motes), which are severely constrained in processing power, memory and energy. The nodes are equipped with an environment sensor. Events recorded by the sensor nodes are locally aggregated and then forwarded to a base station for further processing. WSNs are expected to be in wide use for a multitude of different scenarios. Project target is to analyse possibility of wireless transfer of digitalised data from sensors. Work contains and compares: Wi-Fi, , WiMAX, ZigBee, GPRS, radio net and IrDA. The work will design a wirelless network with data collection from sewerage plant sensors in small rural agglomeration and transfer data to the central dispatching. The work will suggest several options and compare their advantages and disadvantages.
|
|
|
Data transmission in mobile networks
Bílek, Petr ; Molnár, Karol (referee) ; Havelka, Dušan (advisor)
The Bachelor’s thesis deals with mapping and usage of mobile networks of data transfers. It describes every particular generation of networks and technologies that they can use. This thesis is divided into two main parts, theological and practical. In the first part, the technologies of the second and third generation currently used for data transfer in mobile networks are described there. This concerns especially GPRS, EDGE and UMTS services. The thesis focuses on modulations used for these technologies, together with the coding and bit rates possible. It compares their advantages and disadvantages and presents their utilization among national operators. It also tries to sketch out the way the data services of mobile networks will proceed. The second part of the thesis is also divided into two parts. The first one is the simulation of the UMTS network with the assistance of the OPNET Modeller 14.5 environment. In this case, the thesis aims at two important characteristics - such as the dependence on the bit rate and distance of the primary station, and dependence on the bit rate and total load of the whole network. Both characteristics are observed mainly because of the bit rate and power characteristics. It describes objects and funcions of the OPNET environment. The next part in the practical section is the factual measurement of the Internet 4G service, provided by T-Mobile operator. The thesis focuses here on the presentation of the outcomes which were accomplished by the practical measurement of that service. The end of this thesis is dedicated to the comparasion of simulated outcomes with the outcomes practically measured, and to the conclusion of the results emerged from them.
|
|
|
Forestry cableway remote diagnostics
Říha, Pavel ; Pazdera, Ivo (referee) ; Klíma, Bohumil (advisor)
This bachelor's thesis focuses on description of electronics and controllers of forestry cableways Larix. The stress is laid on controlling system among others working with GSM modem securing the communication with remote monitoring centre. The analysis of the need of local as well as remote diagnostics leads to definition of requirements for communication channel that needs to be secured. Applying GSM net and communicate through standardised industrial modems connected through port RS232 is suggested as the most effective solution. The main part of the dissertation includes particularities and possibilities of communication through GPRS service. All-embracing communication channel including the server that transfers data packets among particular clients is designed and programmed. The final part summarizes achieved results and outputs of testing compiled solution including data throughput and response. Simultaneously based on acquired experience some procedures for final implementation in evolution and production of new types of cableways are recommended.
|
|
|
Quality and accessability measurement of GSM network
Vondra, Marek ; Wieser,, Vladimír (referee) ; Hanus, Stanislav (advisor)
The thesis is specialized on a possibility of measuring qualities and availability of a cellular radio system and also on evaluation qualities, fruitfulness interface, permeability etc. It includes short description of a basic mobile technology. Further analysis of the possibility of measuring the mobile network and how implement the measure. It also includes a draft program for measuring and evaluation of the GSM network with help several tests by a mobile phone connected through the Bluetooth.
|
|
|
Data transmission in GPRS and EDGE networks
Slovák, Jiří ; Ries, Michal (referee) ; Hanus, Stanislav (advisor)
The thesis is conceived as a part of the laboratory task innovation in subject Radio and mobile communications. The main part of the project is to create a complex GUI application in MATLAB programming environment that mediates measuring of bitrate in GPRS and EDGE networks, communication with used modem via virtual serial port and consists of other related functions. The problematics is at first described in detail on theoretical basis with special focus on physical layer of mobile technologies mentioned above. In practical part, there are briefly outlined mechanisms that were used during development. The following part consists of a detailed description of the application itself, created using gained theoretical knowledge.
|
|
|
Remote data acquisition with the help of GSM modems based on Open AT platform
Otoupalík, Pavel ; Koutný, Martin (referee) ; Šilhavý, Pavel (advisor)
This bachelor's thesis deals with remote data acquisition with the assistance of GSM modems based on Open AT platform. The result of thesis is the realized module which servers as a converter temperature to frequency. This module is connected with Wavecom Fastrack M1306B programmable GSM/GPRS modem. They are intended for temperature measurement from 0 to 40 °C together. With the assistance Open AT platform and C programming language were created two applications. The first application sends data as temperature, date and time on remote FTP server via GSM network as GPRS data. The results of measurement are displayed on website in form of the table and graph. The second application sends a temperature measurement data via SMS message as reply to SMS message.
|
|
|
Wireless IR Sensor for Area Invasion Detection
Suchý, Lukáš ; Kubíček, Michal (referee) ; Kolouch, Jaromír (advisor)
The target of this Bachelor thesis to design a security system for detection of the monitored space disruption, containing several battery powered sensors which are connected to central unit. From Bachelor thesis is evident, that for communication is to be used integrated circuit SI4432. Sensor detects motion in distance no less than 5 m and sends reports of the space disruption to central unit where this information will be processed. After that the user will be informed by the central unit. Sensor unit should be battery powered with lifetime in years. In conlusion, the system it tested in real work.
|
|
|
Security system with mobile comunication
Novák, Petr ; Kučera, Pavel (referee) ; Macho, Tomáš (advisor)
The main aim of this work is to create such an electronical alarm system, which could be used at permanently or temporary inhabited areas or in cars. The advantage of this system is the possibility of the silent alarm, which is carried out by SMS. These messages are sent by to the owner or to the security company by GSM service. The first part of the project tries to solve the problem of guarded areas. It is necessary to deal with this problem, so that the system itself could work correctly. The second part describes the SMS contents and the way of communication between the microprocessor ATmega16 and the mobile phone Siemens C35 by AT commands. Up-to-date price comparison of these services, which are offered by mobile provider, are included in this part. The focus of the third part is hardware realisation of electronical alarm system. This part sloves connecting of battery backup, battery recharging in the mobile phone and analyses single sensors as well. In the last part the suitable algorithm with the help of a higher level programming language C is used for the microprocessor system.
|
|
|
Localization system making use of GPS and GSM
Klozar, Lukáš ; Pust, Radim (referee) ; Šebela, Radek (advisor)
Aim of this master´s project is to analyse localization possibilities in GSM and GPS wireless networks. Choise of proper module and design location device for both GPS and GSM networks. Design and construction of system, which is able to designate it´s positron, using both GPS and GSM networks. The location informations, are send to Internet server, using GPRS system. Localization techniques in both wireless network are described. The system which is able to get position information was designed and constructed. The module´s driving software and the software, which process the localization informations and controls the database storing process, was designed.
|
guest ::
