|
| |
|
|
Simulator of voltage output -10V to +10V
Horváth, Michal ; Streit, Jakub (referee) ; Bradáč, Zdeněk (advisor)
This thesis is about voltage simulator with microcontroller. The thesis presents some of the available industrial concepts. After that custom design is being proposed of simulator. Hardware proposal includes schematic and printed circuit board design of simulator and power supply. After designing of hardware part, the thesis focuses on software developing. Eventually, the thesis focuses on measurement and discussing of measured results.
|
|
|
DAC converter for CD/DVD player
Vomočil, Vojtěch ; Brančík, Lubomír (referee) ; Kratochvíl, Tomáš (advisor)
Bachelor thesis deals with the design and construction of D/A converter used in the area of audio signals with digital interface SPDIF. In the theoretical part of the thesis the design of block structure of the D/A converter module is included with assumption on realization by receiver of the digital signal Cirrus Logic CS8414 and D/A converter CS4334. In the practical part of the thesis the detailed wiring scheme of D/A converter, printed circuit board design, parts layout and construction design for implementation are presented. In the experimental part of the thesis the functionality of the D/A converter is tested and verified including the measurement results. Measured results are presented in the form of standard protocol. D/A converter can be used as stand alone module and connected to CD or DVD player. At the converter outputs audio amplifier and speakers can be connected.
|
|
|
Design of current-steering DAC for differential IQ decoder
Klein, Miroslav ; Šotner, Roman (referee) ; Dřínovský, Jiří (advisor)
This master’s thesis deals with design of two channel digital to analog converter for automotive applications. In first part, different topologies of D/A converters and their properties are discussed, with focus on current steering topology. Second part deals with design of convertor topology and current steering application. In third part, all parts of designed convertor are described and simulations results are presented. The designed two channel D/A converter has differential current output with 11b resolution per channel.
|
|
|
Audio D/A converter used for laboratory measurements
Abrman, Milan ; Stifter,, Jiří (referee) ; Kratochvíl, Tomáš (advisor)
The aim of this thesis is design stereo digital to analog convertor for school laboratory usage. Scope of the thesis covers the design of all the functional units: input signal circuit, S/PDIF receiver, D/A converter, high quality analog output stage with active low pass filter. Thesis also cover design of all control and indicating parts containing microcontroller with control parts, alphanumeric OLED display and setting indicators.
|
|
|
Measuring Unit Controlled by Computer
Žižka, Josef ; Dřínovský, Jiří (referee) ; Šebesta, Jiří (advisor)
The object of this work is to meet readers with the basic principle and solution of universal measuring cards for personal computer, project and realise own „Measuring Unit Controlled by Computer“. Comparing parameters nominated unit with commercial using devices. The project describes contituent elements like set analogue inputs for measuring of voltage and current, analogue outputs, digital inputs, digital outputs and counter. The work deals with using standard interface USB for communication between measure unit and host by personal computer. And explanations control program of the microprocessor.
|
|
|
Simulator of voltage output 0-10V
Mačišák, Martin ; Baštán, Ondřej (referee) ; Bradáč, Zdeněk (advisor)
This bachelor's thesis deals with the design of the voltage output simulator in range of 0-10 V with microcontroller. The part of my bachelor's thesis is theoretical outline of whole system, draft of this system and draft of source. Further creation of wiring diagrams and PCB. Fitting of PCB and programming. This thesis checks up the functionality of the draft and also of whole system. Next outputs are compare with required outputs. Literary research is integral to my bachelor's thesis.
|
|
|
General purpose analog signal converter
Strážnický, Martin ; Povalač, Aleš (referee) ; Kubíček, Michal (advisor)
This work deals with the design of a galvanically isolated converter of continuous analog signals and the design of a galvanically separated converter of digital TTL signals to HTL signals. The device is complemented by a STM32 microprocessor, which ensures the connection of analog input and output. The result of the work is the circuit structure of individual units, the results of simulations of important units, complete data for the production of device and measured values of individual units.
|
|
|
Adaptable video A/D converter
Maňas, Stanislav ; Hála, Ondřej (referee) ; Říčný, Václav (advisor)
Master's Thesis deals with the complete proposal of light adaptability A/D converter. In the second chapter there are describes types of sensors. Third one describes the most used methods of light adaptability. In the fourth chapter there is describe the adaptability A/D conversion. Chapter 5 describes the block diagram. In the sixth chapter there is the design of all blocks of A/D converter. Finally in the chapter 7 there are construction documents for realization.
|
|
|
The realization of measurement workplace for simulation and testing of AD converters
Panáček, Jiří ; Fujcik, Lukáš (referee) ; Háze, Jiří (advisor)
The objective of this thesis is a design of a development kit, which is used in laboratories during the lessons of Theory of analog to digital conversion subject. This device is adapted for basic measuring and understanding of digital to analog (D/A) and analog to digital (A/D) converters and contains sigma-delta A/D converter made of basic elements, D/A converter with R-2R resistor net, active low pass frequency filter (Sallen-Key), PWM generator, SAR A/D converter with 16 b resolution, reference voltage source and module for measuring integral and differential nonlinearity of A/D converters. The modules are available connect to each other via jumpers and they are driven by microcontroller. This solution gives various modes of operation, which can be selected by user via buttons. Development kit has five BNC connectors for securing connectivity to an oscilloscope or a signal generator. The device also contains universal serial bus connectivity for use with personal computer or laptop, which is really useful with Matlab software for automation processing of measuring.
|
guest ::
