|
|
The inclined belt conveyor
Potočník, Jan ; Hloska, Jiří (referee) ; Kašpárek, Jaroslav (advisor)
This bachelor thesis deals with the design of the belt conveyor for aggregate. The thesis contains the description of the belt conveyor, functional device calculation by norm ČSN ISO 5048, the determination of main dimension, the design of the drive device and the strength calculations. The technical drawings are attached to the thesis.
|
|
|
Coarse-grained asphalt mixtures
Brida, Peter ; Hýzl, Petr (referee) ; Dašek, Ondřej (advisor)
The diploma thesis is focused on the comparison of the influence coarse-grained aggragate on the properties af asphalt concrete. The theoretical part describes issue of production and usage of asphalt mixtures. The practical part evaluates multiple types of asphalt mixtures and describing their properties. Stiffness by a two-point bending test, a wheel tracking test and low-temperature cracking and properties by uniaxial tension test were used to evaluate the properties of the mixtures.
|
|
|
Study of the influence of feedstock composition and the values of the modulus of elasticity of concrete
Šafrata, Pavel ; Křížová, Klára (referee) ; Hela, Rudolf (advisor)
Modulus of elasticity is significantly reflected feature of concrete, besides the compressive strength in static design nowadays. Low modulus of elasticity can cause unacceptable deflections for subtle skeletal structures. It is at least irresposible to count with empirical formulas since there is a wide range of materials and additives in production of concrete. The aim of this thesis is to study the influence of large fraction aggregate on static and dynamic modulus of elasticity of concrete and recommendation for appropriate measures to produce concrete with high modulus of elasticity. The experimental part is further following up the influence of air content in concrete on the modulus of elasticity.
|
|
|
The utilization of the pavement waste materials to roads
Furdaničová, Alice ; Šperka, Pavel (referee) ; Stehlík, Dušan (advisor)
The diploma thesis deals with the use of recycled asphalt with aggregate in a hydraulically bound mixtures. The mixture is determined in the base or sub-base course of the pavement. The theoretical part of the diploma thesis describes the base course of the pavement, the production of recyclates from construction demolition waste, the acquisition and processing of recycled asphalt, the road reuse and recycling. The thesis is enriched by a contribution from the implementation of recycled asphalt laying into the base course of the communication company SKANSKA a.s. and ČNES a.s. The next chapter describes detailed experiences with recycling abroad. The thesis also contains a description of laboratory tests, which are important for evaluating the properties of mixtures with recycled asphalt. The practical part verifies the suitability of the mixture of recycled asphalt and aggregate for the road surface by testing the transverse tensile strength, compressive strength and frost and water resistance. The mixtures used are found to be suitable for pavement base course.
|
|
| |
|
|
Usage of thin wearing courses with highly polymer modified bitumen
Renza, Jaroslav ; Rous, Vojtěch (referee) ; Dašek, Ondřej (advisor)
The diploma thesis deals with technology for the implementation and use of asphalt concrete for very thin layers (BBTM) with use of asphalt binder of high-polymer modification (HiMA). Further, there are described selected and performed functional tests. Thesis also contains design of a mixture for bituminous concrete type targeted for very thin layers with different types of binders. After a suitable design of the mixture, laboratory tests were carried out (stiffness modulus, resistance to permanent deformation, low temperature characteristics, water resistance and particle loss). The output of this work is a set of measured values and processed results with their interpretation.
|
|
|
Effect of aggregate type on lime mortar rheology
Vozák, Rastislav ; Rovnaník, Pavel (referee) ; Vyšvařil, Martin (advisor)
The subject of this bachelor thesis is examining the effect of aggregate type on lime mortar rheology. In the theoretical part, the thesis describes types of liquids and basic rheological quantities. Afterwards there are described some of the rheological behaviour models of non-Newtonian fluids. Furthermore, the theoretical part characterizes measurement of the flow, devices used for the measurement including the oscillatory measurement and its individual modes. Scientific literature was used to describe the rheology of the lime mortars and it covers the effect of different additives on the rheological behaviour. There is also characterized the effect of aggregate on the properties of lime mortars. The experimental part talks about the effect of three various kinds of aggregate on rheological prop-erties of the fresh lime mortar. The chemical composition of aggregates and their granulometry was determined. Subsequently, flow measurements were carried out and evaluated into flow curves. The yield stress, coefficient of consistency and flow index were assayed. In the oscillatory measurement there were measured complex, elastic and viscous modulus and loss factor.
|
|
|
Belt conveyor for crushed aggregate
Kohoutek, Martin ; Kašpárek, Jaroslav (referee) ; Jonák, Martin (advisor)
In this bachelor thesis is to implement the structural design of the conveyor belt for transporting of crushed aggregate of the granularity specified transport capacity 70000 kg/ h and entering the transport height of 7 m. In this paper briefly describes the main portion of the belt conveyor further functional calculations performed according to valid standards CSN ISO 5048, design of basic dimensions, drive, tensioning devices and stress analysis of selected parts of the conveyor belt. The work is accompanied by the required drawings.
|
|
|
Influence of environmental conditions on the modulus of elasticity of concrete
Peřina, Tomáš ; Novosad, Petr (referee) ; Křížová, Klára (advisor)
Increasingly, the modulus of elasticity of concrete is at the forefront of interest. In the past, it has been neglected to some reason and not taken into due consideration. The theoretical part of the bachelor thesis is to study of factors influencing the static modulus of elasticity in compression. The practical part is focused on monitoring the modulus of elasticity of concrete, based on the different type of the environment stored test specimens. Concrete will be stored outdoor in the water and in the laboratory environment conditions. Designed concrete mixes will be primarily different with the used of type of admixtures but also with type of cement. The result values will be compared on the dependence of environmental conditions of the test specimens.
|
|
|
The screw conveyor of aggregate
Novák, Pavel ; Jonák, Martin (referee) ; Řezníček, Milan (advisor)
This bachelor's thesis deals with the design of the screw conveyor for transport of aggregate. It consists of a technical report containing mainly conceptual design of the entire device, calculation of the main dimensions, design a functional drive and choice of flexible shaft coupling, load calculation, selection and checking of bearings and strength control of structural components, plus drawings, which consists of a set of proposed installation, detailed subassemblies of the attachments of worm shaft in all bearings, welding subassemblies of the trough and production drawing of the input pin.
|
guest ::
