|
|
Determination of the risk elements and other elements concentration in animal feed
Křehlíková, Jana ; Juglová, Zuzana (referee) ; Diviš, Pavel (advisor)
This thesis deals with the determination of selected microelements and macroelements and risk elements in dog and cat food. The theoretical part describes the nutrition of dogs and cats and focuses on the safety of the food in the context of contamination with risk elements. Another topic discussed is the chemical analysis of feeds, specifically the determination of nutritionally important substances, beneficial elements, and contaminants. The experimental part deals with the preparation and digestion of feed samples and the subsequent analysis of these samples using ICP-OES and AAS methods. The detected concentrations of the elements of interest in the feeds were compared with the feed standards issued by the Department of Veterinary Medicine and the decree issued by the Ministry of Agriculture. The analysed feeds were found to be deficient in some elements. The content of the risk elements in the feed met the legal limits and did not pose a health risk to the animal. Elements for which the legislation does not provide a maximum permissible limit were present in the feed-in in high concentrations that could already harm the animal's health.
|
|
|
Communication Interface for Industry 4.0 testbed
Magáth, Marek ; Fiedler, Petr (referee) ; Kaczmarczyk, Václav (advisor)
This diploma thesis deals with the creation of a general communication interface between the smart product and process cells within test bed Barman. The aim is to create distributed production according to the Industry 4.0 concept, where each product manages it’s production itself. The first part deals with the analysis of test bed, where are discussed requirements and method of production. Then with the selection of a communication protocol that would meet Industry 4.0 and distributed control requirements. The result of the research was OPC UA communication protocol. Using this protocol, the product and the process cell will communicate with each other. I chose the appropriate implementation for the selected protocol to be used for creating communication modules of the product and the process cell. Production data will be stored in an RFID chip located in the product. Part of the work is devoted to creation this data structure, which contains the recipe as well as production state data. Creation of RFID reader is the work of another student, with whom I solved the method of data exchange between application of the reader and the communication module of the product. When creating a communication module of the process cell, I solved the design of an information model that describes the entire process cell, and the dynamic creation of nodes in the address space. I have mentioned a few examples of how I worked with a selected implementation of OPC UA and how I used it in both applications. I implemented decentralized search of another process cells in the local network. This feature was easy to implement with OPC UA, specifically with the LDS-ME service. I solved the control of production for the communication module of the product and method of communication with the process cell. And in the last part I deal with manual, which describes how to compile projects correctly, specifically on the Linux operating system, and I have described a way to test the whole solution together with the results.
|
|
|
Study of surface water quality in the Ivančice area
Jonášová, Simona ; Řezáčová, Veronika (referee) ; Komendová, Renata (advisor)
Selected physical and chemical water quality parameters were measured at four sampling localities on the Jihlava River. Using UV-VIS spectrophotometry, inorganic forms of nitrogen, chlorides, total phosphorus and CODCr were determined. BOD5 was determined by the dilution method. Na+, K+ and Ca2+ ions, whose concentrations ranged from 5,75–108 mgl 1, were measured by flame emission photometry. Selected metals (Cu, Ni, Pb, Zn, Hg, Cr, Fe, Mn) were determined in water by the ET-AAS method. Decomposed sediments were determined by the FAAS method. Concentrations of Cr, Cu, Pb and Ni in water were in the range of 0,05–2,84 gl1. Metal concentrations in sediments ranged from 0,02–293 mgkg1, where nickel concentrations were above the limit. The occurrence of iron and manganese is due to the geological subsoil. For the other elements, anthropogenic source is assumed. From the measured data, the water quality is slightly variable in this locality and is classified as fourth or fifth class, i.e. as highly polluted water.
|
|
|
Inorganic analysis of microwave pyrolysis products from sewage sludge
Šintajová, Kristína ; Doležalová Weissmannová, Helena (referee) ; Komendová, Renata (advisor)
This bachelor thesis deals with the analysis of risk elements found in the sewage sludge of wastewater treatment plants and the issue of contamination caused by sludge deposition in soils. Extractions of sewage sludge samples before and after pyrolysis treatment were implemented according to the sequential extraction of BCR and also using aqueous leaching. The determination of the selected element was performed on an atomic absorption spectrometer. A literature research on the use of modified sewage sludge after pyrolysis to increase fertility, improve soil properties and improve their quality was also processed.
|
|
|
The significance of platinum in the environment
Brestovská, Marta ; Holubová, Zuzana (referee) ; Sommer, Lumír (advisor)
This bachelor thesis deals with monitoring of individual platinum compounds in the environment (water, soil, air) and is also reviewing methods used for their analysis. The no less important determination of platinum in tissues and body fluids, when the platinum is used in form of a cisplatin as an anticancer drug, is also mentioned. Afterwards the anticancer drug itself or its derivatives and metabolites on the base of platinum complexes in clinical sample (urine, plasma) are determined. Mainly the ICP-AES, ICP-MS, ETA-AAS, HPLC methods are highlighted from the methods used for the determination of Pt. The on-line connection between some of these methods such as ICP-MS with HPLC or ICP-AES with HPLC seems to be useful. The spectrofotometric methods using organic and inorganic agents can also be used for the determination of platinum. These methods are mentioned here rather marginally, just for completeness. In terms of practical use they are difficultly reproducible and not very sensitive. The hydrolysis of platinum metals to form insoluble hydrated oxides makes also the determination difficult.
|
|
|
Study of metals bioaccumulation by the aquatic moss Fontinalis antipyretica
Jaskowiecová, Lenka ; Hekera,, Petr (referee) ; Diviš, Pavel (advisor)
This diploma thesis is focused on determination of bioavailable cadmium in natural waters. Thesis is devided to two parts-laboratory study in model solution and experiments in real surface water system. During the laboratory experiments the accumulation and release constants of cadmium by aquatic moss Fontinalis antipyretica were determined. In Morava river experiment this aquatic moss was used to determine bioavailable fraction of cadmium and the moss bag technique were compared with another methods for phytotoxic metals determination.
|
|
|
Asset Administration Shell for the operator
Houdek, Vojtěch ; Kaczmarczyk, Václav (referee) ; Baštán, Ondřej (advisor)
This bachelor thesis deals with the topic of AAS (asset administration shell), an element of industry 4.0. The first half of the work consists of a theoretical analysis of the concept of AAS and its active and passive parts. The second half is devoted to the practical design and implementation of AAS for the operator. The implementation of the communication architecture and the selection of suitable Hardware for AAS are addressed here. The resulting implementation deals with programming the active and passive part of AAS in C/C ++ and mobile applications in Android Studio using the programming language Kotlin
|
|
|
Bioavailability of metals species in water ecosystem
Tandler, Ágnes ; Řezáčová, Veronika (referee) ; Vávrová, Milada (advisor)
Koncentrace volných kovových iontů je často jen malou částí celkové koncentrace kovu v prostředí. Přes tento malý obsah, je ve většině případů koncentrace volných kovových iontů klíčovým faktorem při určování biodostupnosti a toxicity pro organizmus. Membránová technika Donnan se používá k měření koncentrace volných kovových iontů a v této diplomové práci je ověřena pro směsi kovů (Pb + Cu) při absenci a přítomnosti malých organických ligandů. Olovo a měď jsou environmentálně důležité kovy díky své toxicitě a rozdílným vazebným vlastnostem ve vztahu ke studovaným ligandům.
|
|
|
Microdetermination of cobalt by methods of molecular and atomic absorption spectrometry
Charuza, Martin ; Řezáčová, Veronika (referee) ; Sommer, Lumír (advisor)
This diploma thesis is focused on microdetermination of cobalt by UV-VIS spectrophotometry with organic agents and comparison with atomic absorption spectrometry. In the first part properties, occurance and importance of cobalt in the environment are desribed, complete with as a part of vitamine B12. Attention is also given to cobalt compounds, especially in the oxidative states +II and +III. Methods of preconcentration and preparation cobalt determination in real samples are adduced. In this thesis are described some optical analytical methods with accept on spectrophotometric agents for determination of cobalt. The experimental part of this thesis icludes optimalization of the spectrophotometric determination of cobalt with choosen organic agents 4-(2-pyridylazo)resorcin and 2-(5-Brom-2-pyridylazo)-5-diethylaminophenol and optimalization of atomic absorption spectrometry for cobalt determination. All of real samples of water (surface, underground, mineral and waste) were measured by both 4-(2-pyridylazo)resorcin and 2-(5-Brom-2-pyridylazo)-5-diethylaminophenol via UV-VIS and via atomic absorption spectrometry. Results of determinations were compared. A sample of vitamine B12 was measured too by all techniques.
|
|
|
Study of the content of risk elements in soils and plant material
Vlčková, Renáta ; Řezáčová, Veronika (referee) ; Komendová, Renata (advisor)
This bachelor thesis deals with the study of the content of selected heavy metals (Zn, Ni, Fe, Mn) in soils and mushrooms. The flame atomic absorption spectrometry method was used to determine the heavy metal content. Fungi and soil samples were collected at 18 sites in the Jeseníky region. The concentrations of heavy metals in the mushrooms were in the range from 140–582 mg/kg Zn, 48–380 mg/kg Fe, 5–19 mg/kg Mn and 3–8 mg/kg Ni. Zinc had the highest concentration value in all mushroom species. In soils, the concentrations of heavy metals ranged from 10–72 g/kg Fe, 52–1,000 mg/kg Mn, 29–115 mg/kg Zn and 6–50 mg/kg Ni. Iron was the most abundant element in the soils. Mushrooms contamination was assessed as a health risk in the study area. However, the pollution of forest soils was assessed as satisfactory and thus the productive function of the soil is not impaired. The type of forest cover was found to have minimal effect on the chemical composition of the soils.
|
guest ::
