|
| |
|
|
Design of conveyor of couplers
Klár, Pavel ; Ripel, Tomáš (referee) ; Krejsa, Jiří (advisor)
This thesis is focused on the design of conveyor of couplers with regard to the requirements for the resolution, and consisting of several parts. The first part outlines the given issue, short research study and an idea of solution. The next part concentrates on the structural design of the whole conveyor. Then the description of the first part of the conveyor including the structural design and the required calculations follow. Finally, other conveyor parts, the budget and the instruction manual are explained. The thesis includes the related drawings and all necessary calculations for other conveyors parts as well.
|
|
|
St. Michael's Hospice
Krmaš, Jan ; Kalivoda, Tomáš (referee) ; Kalousek, Lubor (advisor)
The topic of the master thesis is new medico-social facility hospice St. Michaela. The purpose of the object is the maximizing of improvement in the quality of life of dying, severely ill and incurable patients, with the use of palliative care. The construction follows the Complex of Regional Hospital Náchod. Together with as a retirement home Náchod completes a support network of health and social care. The building is designed as a four-building storey and is partially embedded into the sloping terrain. Floors are divided into individual facilities and together constitute a functional unit. In the basement is the technical room, warehouses, garages and kitchen facilities. On the ground floor are then socio-public rooms and facilities. On the second floor is located hedmaster of hospice and accommodation area. The third floor is devoted to the accommodation area. The proposed structure made of brick longitudinal system, supplemented by concrete basement walls. The horizontal structure is made of filigree ceiling panels. Stairs are designed as a precast concrete and steel. Individual roof structures is made from unwalkable, walkable and vegetation compositions. The cladding consists of ventilated facade of glass and wooden panels. Foundations are designed from the lineal foundation.
|
|
|
Multi-storey building
Jetonický, Pavel ; Puchner, Josef (referee) ; Sýkora, Karel (advisor)
The subject of the master´s thesis is the design and assessment of the static load-bearing steel structure office building. It is an eight-storey building with a floor plan and dimensions 54x15m. The proposal has three variants. In one of them a steel frame with a hinge attached elements. These are the pillars, beams, trusses, joists and purlins, which are coupled with trapeze plate and thereby secure the stability of the position in the horizontal direction. The steel structure is placed between the reinforced concrete towers.
|
|
| |
|
|
Mechanical barrier project
Kubeš, Ondřej ; Škopán, Miroslav (referee) ; Malášek, Jiří (advisor)
The first part of the thesis analysis is about the most common concepts of barriers which restrict the passage of vehicles. These provide security for parking cars. On the basis of this analysis is made design of road barrier. This proposal is accompanied by the plan.
|
|
|
Magnetic separator
Křupka, Jiří ; Jonák, Martin (referee) ; Malášek, Jiří (advisor)
The aim of this bachelor thesis is to design the structural conception of magnetic separator designated to separate small-sized industrial waste. This report provides an overview of facilities of worldwide manufacturers that are used for magnetic separation of steel scrap. Furthermore, it offers an assessment of variants for technical solutions to structural nodes of magnetic separator; this is followed by a selection of specific solution. According to the input parameters, all the parameters necessary for correct machine design are computed. These computations also include the justification of selected table values, placement, surface roughness, geometric tolerances, materials and heat treatment of the individual parts and assemblies. Attachments to this technical report are documentation drawings of selected parts and assemblies.
|
|
|
Design of storage tank
Jahodová, Miroslava ; Lošák, Pavel (referee) ; Létal, Tomáš (advisor)
Subject of this bachelor thesis is a structural design of a vertical cylindrical storage tank with fixed roof. In the first part, basic types of storage tanks are described, followed by various approaches to structural design of a vertical cylindrical storage tank. Second part includes design calculations of the vertical cylindrical storage tank according to the standard ČSN EN 1993-4-2 as well as stress analysis using finite element method.
|
|
|
Design of sand blasting machine modification
Klár, Pavel ; Fuis, Vladimír (referee) ; Krejsa, Jiří (advisor)
This thesis is focused on design and implementation of structural adjustment of sandblasting machine with regard to the requirements of resolution. The first part consist of short study describes a blasting technology and various types of blasting machines. Second part – practical part consists of problem analysis and setting goals to be achieved. The main goal of the design is to not influence the machine and to limit presence of the operators by modification in the actual process of sanding. There is also detailed design of solution’s proposal which fulfills the specified goals and is supported by calculations. Descibed design was realized and preliminary results suggest that pre-defined goals are met.
|
|
|
4-stroke CI-engine Con-rod for Truck
Židek, Lukáš ; Svída, David (referee) ; Dundálek, Radim (advisor)
Brief roundup resolution of problem, tendency and new technologies. Elaboration filling proportion and ordering engine and his exploitation. Suggested proportions of con-rod and his constructive resolution with respekt on strength, functional property, production, service and lifetime. Check strength calculation con-rod eye, shank, top, connecting-rod bolt.
|
guest ::
