|
|
Low-speed Wind Turbines for Small and Medium Size Applications
Forró, Bálint ; Paar, Martin (referee) ; Procházka, Zdeněk (advisor)
Bachelor’s thesis deals with usage of slow-running wind turbines for small and medium applications, especially with Savonius rotor. In first part I described theoretical usage of wind and analysis of wind power plants. Next part describes advantages and disadvantages of Savonius wind rotor and its practical usage. Thesis is ended with engineering design of wind rotor of this type for according performance at specific wind speed.
|
|
|
Ejection mechanism automotive starter pinion
Sláma, Miloslav ; Janda, Marcel (referee) ; Hájek, Vítězslav (advisor)
The thesis describes ways ejection pinions automotive starter and evaluation of the advantages and disadvantages of each solution. The first chapter deals with the principle of operation of DC motors and starters parameters. In the second part, the individual systems are theoretically discussed in terms of design and their advantages and disadvantages. The third part is focused on the most common system, which is analyzed in terms of mechanical and electrical reliability. The last point of the work is to design an experimental analysis Reach starter pinion.
|
|
|
The influence of eccentricity upon the radial forces in an induction motor
Formánek, Jakub ; Hájek, Vítězslav (referee) ; Janda, Marcel (advisor)
The aim of this master thesis is to get familiar with the influence of radial forces in the induction machine. Induction motor is one of the most commonly used and most extended type of machine, therefore it is useful to detect the intensity of theese forces and their influence at operation of the machine. In this work ,radial forces are computed by the software simulation in ANSYS Maxwell. Models are created with help of module Rmxprt and finite elements method.These models are based on real induction motors with predefined size of eccentricity. In the final part we perform a measurement of deviations on the real machine using vibrometer.
|
|
|
Small rotor dynamic balancer
Staněk, Michal ; Vyskočil, Pavel (referee) ; Kubíček, Michal (advisor)
Balancing of rotors is used to remove unwanted vibrations caused by uneven distribution of mass around the axis of rotation of the rotor. Operation of an unbalanced rotor may causes shortening of bearing life, fatigue of materials and deformation of shafts. This work deals with construction of a balancing machine (balancer). Because of its good properties, a soft bearing type balancer was chosen for construction. This type of balancer achieves higher sensitivity at the cost of calibration required for each type of rotor. To capture the magnitude of vibration electrodynamics sensors were chosen. To enter data and display results a microprocessor is used.
|
|
|
Measurement of induction machines
Sporni, Peter ; Huzlík, Rostislav (referee) ; Janda, Marcel (advisor)
This work dissert about problematics of induction engines, which are the most used types of electrical drives used in present time. At the beginning we will explain their construction and its influence to the characteristics of the engine and possibilities of their regulation. In the next part we will describe some basic types of measurments implemented on these engines. To verify the theory which was described in this work we will discuss measurments realized on concrete types of engines. At the end we will calculate the main dimensions for one of the measured engine.
|
|
|
Magnetic field analysis of synchronous machine
Volf, Tomáš ; Janda, Marcel (referee) ; Skalka, Miroslav (advisor)
The Magnetic Field Analysis Project of Synchronous Machine deals with program for magnetic field analysis of synchronous machine cross section. This program is written in detail along with the necessary theory of synchronous machine and the ANSYS program. After this the program for using different types of sectional wires modification is made – in the concrete for round conductors. It is attained the numeric computing method – The Finite Element Method. To creation of the magnetic field simulation serves ANSYS program, which uses The Finite Element Method.
|
|
|
Analysis of dynamic load from induction machine current signature
Pavláček, Jan ; Ondrůšek, Čestmír (referee) ; Huzlík, Rostislav (advisor)
This thesis focuses on the analysis of the dynamic behavior of the load from the measurement of stator currents of induction motor. Work is sorted from basic engine failures equations, mathematical models, types of signal processing, simulation and measurement. The practical part deals with the design of the motor model in Matlab Simulink, the simulated and the measurement of the pump BETA 12 YC On the Department of Fluid Engineering Victor Kaplan. Use appropriate types of signal processing evaluate the results. The aim of this work is to analyze the dynamic changes of the load.
|
|
|
Single-Phase Induction Motor Calculation
Vácha, Pavel ; Vítek, Ondřej (referee) ; Hájek, Vítězslav (advisor)
The master´s thesis deal with the thesis of a single-phase induction motor that is more and more used all over the world. Its aim is assembling the information about this type of motor and its calculation. The content of the first part is the theoretical analysis of a single-phase induction motor and acquirement ways of the stroke moment. Than the work contains a project of basic schema of the single-phase induction motor with an auxiliary phase. The practical part is devoted to an elaboration of demonstration example of the single-phase induction motor with concrete parameters calculation, its method was projected before. Than there is practising successived measuring on the motor of the same parameters made firm EMP s.r.o. Slavkov by Brno in this part. In the conclusion there is the evaluation of the whole process with reached results.
|
|
|
Improvement Power Parameter of Small Induction Motors
Kuda, Roman ; Vítek, Ondřej (referee) ; Hájek, Vítězslav (advisor)
This master´s thesis treats of all asynchronous motor. The project is about type and distribution motors, about differences between three-phase and single-phase machines and efficiency. In one of the chapters describes a particular type of engine with all the parametersfrom the manufacturer. This engine is completely analyzed and it is measured in detail. Then the project deals with the division, the calculation of losses and subsequent possibilities to increase the efficiency of induction motor. In the last chapter is calculation of single-phase motors, based on the engine produced.
|
|
| |
guest ::
