|
|
High-speed Condesing Steam Turbine
Klíma, Petr ; Trojan, Aleš (referee) ; Fiedler, Jan (advisor)
ith one controlled extraction and one uncontrolled extraction, calculation of the flow channel at all stage, design and calculation of the regulation valve and create connection diagram of steam turbine and air cooled condenser. At the beginning of this work is an overview of manufacturers of steam turbines and their unified products. Master thesis was developer with G-Team, a.s. as using calculations and the instructions given in the recommended literature with supporting CFD simulations to determine the loss coefficients and FEA simulations to determine the eigenfrequencies blades.
|
|
|
Skin effect in high-speed electrical machines.
Klíma, Petr ; Bárta, Jan (referee) ; Mach, Martin (advisor)
This master thesis deals with the suppression of the skin and proximity effects in high-speed machines. The first part summarizes the general knowledge of high-speed machines. The second part is devoted to the principle and possible suppression of consequences caused by skin and proximity effects. The third part shows the simulation results of models of a synchronous machine with permanent magnets. The results of these simulations reveal the consequences of skin and proximity effects. In addition, design measures are proposed to limit these and other undesirable phenomena to achieve the highest possible efficiency.
|
|
|
Business Project
Rujbr, Lubomír ; Klíma, Petr (referee) ; Mandelík, Petr (advisor)
My diploma thesis is occupy by problems with business project. After determination basic notions which has connection with this thesis I make analysis internal and outer environment of company MMB Consulting, Ltd. and I propose business project building-up family houses in town Rosice u Brna for this company.
|
|
|
A small three phase induction motor
Klíma, Petr ; Cipín, Radoslav (referee) ; Mach, Martin (advisor)
The main object of this bachelor thesis is to determine the parameters of the induction motor with an output of 155 W. Three ways of obtaining the parameters were chosen. Analytical calculation according to available literature, calculation in RMxprt program and laboratory measurement of the motor. For a better comparison of analytical calculations, two literary sources were chosen according to which the calculation was performed. Individual calculations and values obtained by them are included in the thesis. A comparison of the results obtained by individual methods is performed.
|
|
|
High-speed induction machine
Cajzl, Jakub ; Pribulla, Daniel (referee) ; Klíma, Petr (advisor)
This thesis deals with the electromagnetic design of high-speed asynchronous machine. The introduction summarizes basic information that deals with design aspects of highspeed machines and choice of materials. The next part of this thesis is focused on the comparison of basic rotor topologies for high-speed asynchronous machines. The main part of this thesis is devoted to the electromagnetic design of high-speed machine and parametric analysis. In this part, the results of machine basic dimensions and parametric analysis are presented.
|
|
|
Heating options of a house
Klíma, Petr ; Elbl, Patrik (referee) ; Toman, Filip (advisor)
The bachalor‘s thesis, dealing with the possibilities of heating a family house is devided into three parts. The first part presents heat sources for houses and fuels that are used for heating. In the second part, the heat losses of already specifically selected house and the annual energy demand for heating are calculated. The third part deals with the economic evaluation of specific heat sources.
|
|
|
High-speed outer rotor synchronous machine
Král, Radek ; Knebl, Ladislav (referee) ; Klíma, Petr (advisor)
The master thesis deals with the construction and design of a high-speed synchronous machine with an outer rotor. The thesis is organised into three main chapters. The first chapter deals with machine design theory as well as mechanical limits, which are significant for high speed machines. This chapter also provides examples of applications of these electrical machines. In the second chapter, the initial design of the machine is calculated analytically. This machine design is optimised and the third chapter of this work shows the results of simulations using the finite elements method, including the evaluation of these results.
|
|
|
Steam turbines
Klíma, Petr ; Kracík, Petr (referee) ; Fiedler, Jan (advisor)
The goal of this bachelor thesis is to describe development of steam turbine basic parts of steam turbine and its types. In theoretical part there are described history of steam turbines in the world and Czech republic. Next one is principle of steam turbine, description of parts in steam turbine and different connection of steam turbine. In practical part there are calculations of ideal Clausius-Rankine cycle of specific steam turbine.
|
|
|
Project of transport line for dressing corn
Klíma, Petr ; Vrzal, Karel (referee) ; Kašpárek, Jaroslav (advisor)
Subject of this work is a project of transport line for corn dressing. In the document component parts of the transport line are described. As the submitter asked, some existing devices were retained and supplied with missing parts. Some of the missing parts are bucket elevators which transport corn to the cleaner and dressing device. At the end of the transport line there is a frame for easing sack filling and a weighing device.
|
|
|
Flux switching electric machine
Szabó, Hugo ; Klíma, Petr (referee) ; Ondrůšek, Čestmír (advisor)
The goal of this thesis is to create a literature search about a rotating electrical machine with switching of magnetic flux, to explain its construction concept and its operating behavior, to create an initial concept of generator, calculate chosen construction with finite element method analysis and to compare analysis results with analytical design. To create a concept of the generator one of available designing procedures will be used.
|
guest ::
