|
|
Analysis of Powertrain Acoustic Properties
Ambróz, Richard ; Novotný, Pavel (referee) ; Dundálek, Radim (referee) ; Píštěk, Václav (advisor)
Dizertačná práca rieši problematiku analýzy akustických vlastností pohonných jednotiek. V úvodnej časti je teoretický rozbor fyzikálnych princípov vibrácií a hluku a prehľad súčasného stavu riešenia problematiky v oblasti návrhu pohonných jednotiek. Vlastná časť práce popisuje konštrukčný návrh elektrodynamického budiča vibrácií, návrh hodnotenia výsledkov merania a taktiež spôsob spracovania výsledkov. Akustické vlastnosti sú hodnotené pomocou normálových rýchlostí kmitania povrchu. V závere práce sú prezentované ukážky využitia metódy v praktických príkladoch spojených s návrhom pohonnej jednotky. Celé riešenie predstavuje ucelený spôsob analýzy vhodný pre rýchle hodnotenie vplyvu konštrukčných úprav na akustické vlastnosti.
|
|
|
Design of the central housing for very low turbocharger support - sideways oil output
Slovák, Jan ; Novotný, Pavel (referee) ; Knotek, Jiří (advisor)
This diploma thesis is about lowering installation height of turbocharger without significant increase of the oil pressure inside the housing at the piston rings. At the beginning of the thesis is research about supercharging and turbocharging, construction and parts that are placed inside a turbocharger. Next chapter is short brief about CFD. Further chapters are about design and changes at the central housing and about simulations. From simulations were the results obtained.
|
|
|
Cranktrain with High Mechanical Efficiency
Krajči, Jakub ; Raffai, Peter (referee) ; Novotný, Pavel (advisor)
This master's thesis is concerned with the mechanical efficiency of cranktrain contact pairs in a combustion engine. In the introductory part, the fundamental terminology relating to the cranktrain is presented along with the specification of the areas of mechanical losses, greasing modes and types of wear. The following chapters describe the possibilities of eliminating mechanical losses of the cranktrain and the calculation methods that can be utilized to mathematically solve mechanical losses. The practical part includes the proposal of a calculation model and its use in the analysis of the cranktrain of Skoda 1.2 HTP engine. The last part of this thesis comprises modified alternatives of the standard cranktrain focusing on the elimination of mechanical losses. The evaluation of the results is presented in the conclusion of this thesis.
|
|
|
Power Losses of a Rolling Bearing
Šedo, Matej ; Novotný, Pavel (referee) ; Drápal, Lubomír (advisor)
Subject of this thesis is analysis of friction power losses in rolling bearings and design and implementation of computing program. Thesis is divided into six chapters. At the beginning there is overview of different types of rolling bearings and their system of lubrication. Fundamentals of elastohydrodynamic lubrication are described together with effects that occur in lubricant. Remaining part is focused on friction in rolling bearing its sources and calculation. Other programs for computing friction losses are shown and own program is designed. Designed program is applied on bearings of chosen type and results are compared with existing models.
|
|
|
Strength Analysis of Alternator Body
Kratochvíl, Petr ; Vopařil, Jan (referee) ; Novotný, Pavel (advisor)
In this diploma thesis is theoretically described and then practically performed stress analysis of alternator body, which in terms of traffic racing car often passes into disrepair. It is used reverse engineering method. The real part is converted to digital model and analysed using FEM calculation. Incoming data for FEM are obtained by experimental measurement on the car.
|
|
|
Dynamics of Turbocharger Rotor using Slide Bearings based on MBS
Hromádka, Adam ; Knotek, Jiří (referee) ; Novotný, Pavel (advisor)
The first part of the thesis describes construction of turbochargers. The next chapter summarizes currently used methods to solve dynamics of vehicle turbocharger´s rotor. Build-up of the model of a rotor and substitution of a joint with a bearing is appended with advantages and disadvantages. Practical part of the thesis focusses at analyse of a specific rotor of turbocharger with use of MBS. Output of the analyse are rotor´s vibrations. Last chapter complains methods to improve the model.
|
|
|
Strength Analysis of V12 Cranktrain
Melounek, Michal ; Maršálek, Ondřej (referee) ; Novotný, Pavel (advisor)
This diploma thesis .deals with a crankshaft analysis of the VW 6,0 W12 engine. The first goal is to create a CAD model from the real part, then to create a FEM model for computer simulations. With respect to a dynamic character of the loading, the crankshaft is then reduced into a MNF file for the purpose of dynamic simulations in the MBS ADAMS/Engine. The full range of working RPMs is simulated in it. Beside the crankshaft the main and pin bearings are studied too. At the last part of this thesis the durability of the crankshaft is solved.
|
|
|
Solution of Powertrain Dynamics in Vehicle
Hodas, David ; Drápal, Lubomír (referee) ; Novotný, Pavel (advisor)
The main aim of this diploma thesis is to evaluate and select the most appropriate option how to mount a power unit in Formula Student vehicle. It assesses an overall dynamic behaviour of a drive unit mounted in student formula. At the end of the final thesis is an assessment of proposed engine mount variants. The study of parameters that most influence engine vibrations can be seen there.
|
|
|
Solution of Powertrain Vibration on Dynamometer
Lux, Josef ; Janoušek, Michal (referee) ; Novotný, Pavel (advisor)
This diploma thesis deals with vibration of powetrain on dynamometer. For this problem I got six-cylinder engine, which is connected by flexible coupling to dynamometer. According to simplified computational model is this assembly simulated in MBS of system ADAMS View. Two versions of flexible coupling are dealt. In the final part of the thesis is created single program for calculation self-frequency of this assembly and in the end of this thesis is general evaluation.
|
|
|
Determination of Turbocharger Rotor Dynamic Properties
Blaha, Adam ; Zubík, Martin (referee) ; Novotný, Pavel (advisor)
This diploma thesis deals with dynamic behaviour of a turbocharger rotor. The subject is a stock turbocharger for commercial vehicles. The research will be mentioned in the first part of the thesis as well as methods of processing. The second, practical part is divided into two divisions. They are both experimental and computational. The aim is finding of rotordynamic behaviour by an experiment and its comparing with a computational model in ANSYS software. Modal and harmonic analysis of a free and fixed subject will be used by both experiment and evaluation. The subject will be fixed where bearings are located during harmonic analysis. All the experimental results will be processed with mathematical and physical methods like FFT analysis or Campbel diagram. There will be two main types of computational models to choose among. These models will be analyzed in detail. The goal of the thesis is to reach results from ANSYS as close as possible with the experimental testing. This includes finding correct material and physical properties, right choice of mesh and right boundary conditions. At the same time the CPU time compared to the model complexity and results accuracy will be considered in a comparison with data obtained by the experiment.
|
guest ::
