|
|
Educational Nanosatellite in PocketQube Format
Lokaj, Jakub ; Zamazal, Michal (referee) ; Povalač, Aleš (advisor)
Hlavním tématem této diplomové práce byla teoretická analýza současných trendů ve vývoji nanosatelitů, konkrétně se zaměřením na formát PocketQube a jeho aktuální implementaci. V jednotlivých teoretických kapitolách se práce zabývá možnostmi a výhodami využití PocketQube jako výukového modelu pro vzdělávací a vývojové oblasti. Zabývá se také možnostmi 3D tisku nosné konstrukce družice a rozebírám jednotlivé komponenty, jako je palubní počítač, komunikační systém založený na technologii LoRa, napájecí systém a přehled subsystémů. V praktické části byl vyvinut rám družice, jednotlivé části struktury elektroniky PocketQube a implementace základní funkce komunikace a provozu pro vzdělávací model PocketQube.
|
|
|
Supportive landing module for scientific stratospheric probes
Sýkora, Jan ; Zamazal, Michal (referee) ; Povalač, Aleš (advisor)
Tato diplomové práce je zaměřena na vývoj podpůrného přistávacího modulu DUM a jeho periferií pro projekt SnHV. Teoretická část práce představuje přehled počátků vědeckého balonového létání až po moderní éru balonového létání. Druhá část stručně popisuje projekt SnHV a jeho části. Praktická část je věnována návrhu DUM, jeho napájení, vyvinutému tlakovému spínači a ostatním periferiím. Poslední část popisuje experimentálnítestování celé vyvinuté vědecké platformy, jejíž součástí byl DUM.
|
|
|
Design and implementation of educational CubeSat
Košút, Martin ; Zamazal, Michal (referee) ; Povalač, Aleš (advisor)
This thesis describes the design of a CubeSat with a 1U (10x10x10 cm) size, which will be used in laboratory tasks. It includes mechanical construction printed on a 3D printer with six photovoltaic cells, mounted on the top. Cells will produce electricity to power all systems and to charge the onboard NiMH batteries to make the CubeSat independent of other sources of energy. The proposed design of an electrical power supply system and an onboard computer combined with a communication system is based on off the shelf components. The two-way wireless communication link between computer and a CubeSat is realized thanks to the ground station, which is also part of a design. Students will make other systems, which will communicate with the built in onboard computer via internal RS 485 communication bus. Internal EEPROM memory is used to save measured values. Modularity, possible future expandability, and easy repair in case of any failure were the key optimization parameters of the design.
|
|
|
RFID Reader for 13.56 MHz Band
Obšitník, Michal ; Zamazal, Michal (referee) ; Povalač, Aleš (advisor)
Cieľom tejto práce je navrhnúť RFID čítačku pre pásmo 13.56 MHz a zostaviť k nej riadiaci program. V prvej časti je najskôr práca smerovaná k oboznámeniu sa s princípom fungovania technológií RFID a NFC, spolu s tým súvisiacimi medzinárodnými štandardami a k oboznámeniu sa s rôznymi dostupnými čipmi na obsluhu týchto technológií. Keďže čip s ktorým sa bude pokračovať je jasne zadaný v návode, ich porovnanie slúži čisto oboznamovaciemu účelu. V praktickej časti je úloha navrhnúť a oživiť prototyp RFID čítačky. Základom je doska sprostredkúvajúca RFID komunikáciu, audiovizuálnu odozvu a pripojenie k OLED displeju. Táto doska je pripojená na mikrokontrolér na ktorý riadi celé ovládanie zariadenia. Súčasťou projektu je aj set rôznych antén, ktoré je možné na dosku pripojiť a zároveň ich vymieňať. Vyrobené antény sú podrobené testovaniu ako dve rozdielne metódy ladenia ovplyvnia ich chod. Testujú sa maximálna vzdialenosť čítania, úspech prevedených čítaní a hodnota prúdu, ktorá sa vznesie pri kalibračnom procese. Výstupom práce je RFID čítač s riadiacim programom.
|
|
|
Security application of mmWave sensors
Petržela, Lukáš ; Zamazal, Michal (referee) ; Valach, Soběslav (advisor)
This bachelor thesis is focused on possible use of Texas Instrument´s sensors in security systems, especially for perimeter securing. It includes the overview of radar technology principles and describe of Texas Instrument´s radars principle. Appropriate sensors location has been designed and implemented, and a communication protocol has been designed. The functionality and reliability of the proposed solution has been verified. The results are analyzed and evaluated.
|
|
|
WiFi and BT monitoring tool
Zelený, Miroslav ; Zamazal, Michal (referee) ; Valach, Soběslav (advisor)
This bachelor thesis deals with possibilities and ways of detection of devices using Bluetooth or Wi-Fi technology, with the possibility of future use for monitoring of human movement. Detection is only in the 2.4 GHz band. It introduces Wi-Fi and Bluetooth technology and their detection. Device detection was performed using Kismet software and Raspberry Pi platform.
|
|
|
COM Express embedded control module
Malinka, Rostislav ; Zamazal, Michal (referee) ; Valach, Soběslav (advisor)
This thesis deals with design of control embedded module for COM Express interface. It includes block diagram creation and subsequent design of implementation into FPGA. Thesis also contains design of heat dissipation, calculation of current consumption and design of printed circuit board arrangement for this module.
|
|
|
Reconstruction of middle part of the fuselage Z 143 aircraft using semi- monocoque frame
Zamazal, Jakub ; Mališ, Michal (referee) ; Píštěk, Antonín (advisor)
The thesis is focused on reconstruction of middle part of fuselage Z 143 aircraft from truss frame to semi-monocoque frame. In the thesis there is a conceptual design of semi-monocoque middle part of fuselage. The spars of centre wing section are strength controlled. In thesis there is weight analysis according to use the semi-monocoque middle part of fuselage. In second half of the thesis there is a study of retractable landing gear. The thesis shows weight savings according to use a semi-monocoque frame. The thesis also shows that semi-monocoque frame allows other option to upgrade Z 143 aircraft. This thesis can serve as a feasibility study of the reconstruction of the middle part of the fuselage Z 143 aircraft.
|
|
|
Low Noise Amplifiers for frequency range 1-3 GHz
Klegová, Hana ; Zamazal, Michal (referee) ; Kasal, Miroslav (advisor)
This masters thesis deals with low noise amplifier design for frequency range 1 GHz - 3 GHz. There is a short theoretical introduction in the first part of the thesis. There are described parameters and properties of transistors and general two-ports. Description of the noise characteristics two-ports follows. The next capture contains design of two-stage amplifiers. One of them is with a microstrip filter between stages and the second one is with combline filter on input of the amplifier. The amplifiers and the microstrip filter were designed in program ANSOFT Designer. The design of combline filter was realised in program CST Microwave Studio. Both amplifiers ware made and their properties ware compared with simulations.
|
|
|
Antenna for microwave beacon on X-band
Zamazal, Bořivoj ; Pokorný, Michal (referee) ; Kasal, Miroslav (advisor)
This bachelor’s thesis describes an antenna design for microwave beacon in 10 GHz band. In the first section of the work, the possible solutions are presented and a slot antenna, constructed from commercially available waveguide, is chosen. In the second section, the principle of this antenna is described and the dimensions for the chosen frequency and the type of waveguide are calculated. In the third section, the antenna model is built and simulated in the Ansof HFSS environment in accordance with theoretically calculated dimensions and, based on these simulations, two possible versions of antenna are created.
|
guest ::
RSS feed.