|
|
Evaluation of porosity in Al-alloy die-castings
Klocová, Petra ; Nová, Iva (referee) ; Čech, Jaroslav (advisor)
The objective of this diploma thesis is an evaluation of die-castings porosity, eventually the evaluation of seats with local squeeze in connection with their mechanical and structural properties. The swatches of alloy AISi9Cu3 were taken from the engine block made by Škoda Auto Company, Mladá Boleslav. To the evaluation and the comparison of the results there were the other VUT FSI Brno students´ theses used.
|
|
|
Al-alloy die-castings-trends in industrial
Rýdel, David ; Pacal, Bohumil (referee) ; Čech, Jaroslav (advisor)
The objective of this diploma thesis is to state the influence of porosity, DAS and shape factor on mechanical characteristics for the cast transmission cover made in Kovolit Modrice a.s.Which was molten from AlSi9Cu3. It was used an imaging software (Olympus Five) for classification of metallographical structures.
|
|
|
Evaluation of porosity in gravity - cast Al - alloy castings
Staňková, Markéta ; Nová, Iva (referee) ; Čech, Jaroslav (advisor)
Solving of this diploma thesis is evaluation porosity in sequence on mechanical properties from different Al alloys. Castings were made by gravity casting to the iron-mould or gravity casting to the sand. Measurements (mechanical properties, porosity, DAS - dendrite arm spacing, shape factors and sphericity) were statistically analysed and dependencies which were detected were processed to the graphs.
|
|
|
The Feasibility Study of Small Company
Hošek, Martin ; Čech, Jan (referee) ; Koráb, Vojtěch (advisor)
This masters’s thesis deals with a feasibility study of restaurant creation, which should fill a gap in the market. Suggestions for a solution relating to the enterprise and enabling the company to optimally entry to the market are presented, based on theoretical knowledge, empirical facts and analysis.
|
|
| |
|
|
Wireless sensoric network for hop drying facility
Čapek, Lukáš ; Čech, Jakub (referee) ; Šnajdr, Václav (advisor)
The purpose of this project is to build a wireless sensor network for measuring temperature and relative humidity in hop drying facility. This is a monitoring device, consists of several sensor units and one control and display unit. Display unit coordinates a whole network and can display data on LCD or download collected data to PC. Sensor unit measures a relative humidity, temperature, battery voltage and transmits data to display unit. Units contain a transceiver which operates in ISM band 868 MHz. Circuits are driven by 8-bits microcontroller Freescale.
|
|
|
Cardiotachometer
Čech, Jakub ; Sekora, Jiří (referee) ; Čech, Petr (advisor)
Master’s thesis deals with theme of heartbeats. Monitoring and evaluation of heartbeat is important for diagnostician cardiac dysfunction. First part of thesis is focused on anatomical description of heart and his operation. Another part is description of electrical activity of the heart and methods of capture. There is also mention of the cardiac rhythm and its disorders. One of the principal objective of this thesis is to study methods for sensing heart rate. These methods are analyzed and then selected a particular method for further solutions. The core thesis is to design functional cardiotachometer. Cardiotachometer derives the heart rate signal from phonocardiographical signal, which is acoustic manifestation of heart. Implementation takes place in the Labview, which is graphical programming environment. Suggested the device measures the current and average heart rate and the addition of HRV analysis in time domain.
|
|
|
Heat treatment of steels
Rosecká, Eva ; Čech, Jan (referee) ; Šenberger, Jaroslav (advisor)
The Bachelor thesis deals with the questions of heat treatment of steels. The literature search explains the basic methods and principles of heat treatment of steels, the iron-carbon chart of equilibrium structure and the IRA and ARA charts of non-equilibrium structure. At-tention is also paid to the equipment for heat treatment of steels, and the principal mechanical properties that are used in the evaluation of steels are explained in brief. The experimental section contains the comparison of three creep-resisting steels in term of “as cast” condition, heat treated steel using operation procedures and laboratory-processed at up-per temperatures specified by the standard. These steels are mostly used in power industry at high temperatures. Their structure and mechanical properties were monitored at various phases of castings production. In conclusion, statistical evaluations and the comparison of those three materials are worked out within the scope of fifty heats.
|
|
|
NOx production and elimination content in the flue gas
Čech, Jaroslav ; Šnajdárek, Ladislav (referee) ; Hrnčířová, Michaela (advisor)
The Bachelor thesis deals with oxides of nitrogen, resulting from the combustion process. The thesis is concentrated mainly on the description of the emergence mechanisms and on the various measures that are used to reduce their concentration. Part of the thesis is also focusing on legislation in the field of air protection, with the values of the emission limits valid for the Czech Republic and the European Union.
|
|
| |
guest ::
