|
|
Con Rod design and optimization of racing engine
Ulman, Jaroslav ; Zháňal, Lubor (referee) ; Beran, Martin (advisor)
This master thesis describes the design and optimization of connecting rod motor racing car. At the beginning of the whole work is a 3D-model of rods, from which then the whole work is based. Then it analyzes the current model of stress and on the basis of the results are made structural changes to the solution of rods. Newly adapted connecting rod is again analyzed using FEM and newly obtained results are compared with results of the original model of connecting rods. The conclusion deals with sensitivity analysis of selected parameters of rods and their potential effect on the resulting changes in strength connecting rod .Then is an assessment of all results.
|
|
|
Cam-shaft replacement of crank-shaft powertrain of combustion engine
Suk, Jakub ; Blaťák, Ondřej (referee) ; Zháňal, Lubor (advisor)
Diploma thesis deal with possibility cam-shaft replacement of crank-shaft powertrain of combustion engine. In exordium work are designed basic engine data herewith type powertrain. Subsequently is designed several types stroke curves of lobe, after needs on course stroke. Further is in work elaborate engineering design body motor, in detail is solve construction body lobe. In last of capitol is evulate functionality virtual model. At the close are reviewed record and compared benefits and disavantages such engine type.
|
|
|
Commercial vehicle electronic systems
Slepánek, David ; Zháňal, Lubor (referee) ; Fojtášek, Jan (advisor)
This bachelor's thesis deals with electronic systems of commercial vehicles. In the first part the reader is introduced to basic groups of electronic systems, with their functions and applications. The second part discusses particular systems in detail. The last part is dedicated to the development of autonomous commercial vehicles. The thesis also contains the pros and cons of using these technologies in practise. In the conclusion, the helpfulness of each system is assessed.
|
|
|
Motorcycle rotary engine
Novotný, Petr ; Rozsíval, Jan (referee) ; Zháňal, Lubor (advisor)
Diploma thesis is focused on conceptual design of Wankel rotary engine with performance between 30-60 kW. Performance of designed engine is determined to 35 kW and volume of one chamber amounts to 245,58 cm^3. In this thesis are step by step calculated geometrical properties of each design group which are afterwards put into 3D data. There is also solved cooling system of designed engine and design of geometrical and characteristic properties of parts of cooling system. Last but, not least there is solved placement of designed engine into frame of motorcycle. As suitable motorcycle has been chosen Honda CBR125R because it has very advantageous layout of frame.
|
|
| |
|
|
Variable geometry of intake and exhaust ports of Wankel engine
Krejčí, Tomáš ; Beran, Martin (referee) ; Zháňal, Lubor (advisor)
The purpose of this thesis is to design the key parameters of the high-powered Walkel engine and to design a chamber side on the base of computed parameters so that it enables variable change of the intake and exhaust port geometry. Consequently, to carry out a flow simulation in both ports in designed chamber side in order to find out its flow character and geometry change reaction.
|
|
|
Intake system for internal combustion engines
Hadrava, Martin ; Zháňal, Lubor (referee) ; Vančura, Jan (advisor)
The bachelor’s thesis is focused on the internal combustion engine intake systems. Emphasis is placed mainly on the construction and the various parts of the intake systems. The part of the work is also devoted to the different types of supercharging. At the end, the individual parts of the intake system are described further.
|
|
|
Experimental Car Formula Faster Rebuild
Zarambukas, Michalis ; Zháňal, Lubor (referee) ; Blaťák, Ondřej (advisor)
The main purpose of this diploma thesis is the experimental vehicle Formula Faster engine reconstruction. The current Ford Kent 1600cc engine will be replace by the Škoda 1.4 MPI engine. The next task is to analyse kinematic properties of the front axle and subsequent optimization and transformation of steering rod placing which relates to wheel toe and bump travel. The last part is concerned with steering wheel mounting transformation, concretely with reconstruction to obtain removable steering wheel using rapid coupling.
|
|
|
3D printing methods in automotive industry
Juhász, Vojtěch ; Zháňal, Lubor (referee) ; Fojtášek, Jan (advisor)
The bachelor thesis deals with the 3D printing methods in automotive industry. The introductory chapter describes the history and manufacturing process. Next chapter deals with the most used 3D printing technologies and following description of the printing and also most used basic materials. Last chapter is focused on mass and piece production in automotive industry.
|
|
|
Powertrain of racing Wankel rotary combustion engine.
Blažo, Marek ; Blaťák, Ondřej (referee) ; Zháňal, Lubor (advisor)
The main aim of master’s thesis was to handle the computing proposal and the construction design of the powertrain of racing Wankel rotary engine with 300 kW power output and in the case of 9000 speed per minute. On the basic of these values was made the primary design of the rotary engine, design of the eccentric shaft and rotor housing. Mechanical stress and torsional vibrations of the eccentric shaft were analyzed by using the course of indicator diagram.
|
guest ::
