|
|
The battery charger module for GSM security system
Predný, Patrik ; Levek, Vladimír (referee) ; Čožík, Ondřej (advisor)
This bachelor thesis focuses on the design of universal module of charger for lithium battery that is constructed for the GSM device from ELEDUS company, placed in inaccessible, or difficult to access terrain. The solar energy will be used for battery charging and ensuring the GSM module power supply. The module dimensions are as small as possible for maintaining the compactness and the design focuses on the maximum resource utilization.
|
|
|
Low-power Security System of the Electricity-free Cellars
Klimeš, Martin ; Levek, Vladimír (referee) ; Šťáva, Martin (advisor)
The work deals with the available options of security devices for basements, design and implementation of its own security equipment. An FPGA chip from Xilinx was used as a device control. The device also contains a GSM module for sending information via SMS about space violation. Intrusion signaling can also be signaled by a siren. Intrusion detection is performed using a door and motion sensor. The whole device is powered by a battery, but there is also the possibility of mains power.
|
|
|
Control system for racing pneumatic monopost
Kaderka, Jakub ; Novák, Lukáš (referee) ; Levek, Vladimír (advisor)
The thesis is focused on developing a control system for a students project of racing car Falcon with pneumatic propulsion system. The electronic design was splitted into 4 standalone modules to increase reliability and mainain- ablitity of the system. The modules are engine control unit, power supply, human machine interface and speedometer. A CAN bus with customly designed communication protocol is used to interconnect these modules. Except the pneumatic circuit control the elekctronics takes care also about measuring the race related data (pressures in the pneumatic circuit, car speed, etc.). These values are stored on SD card and optionally sent over a wireless link to PC. In the second part of the thesis design of the firmware is described. For the debugging purposes a logging system was developed. The log messages from all modules are sent over CAN and stored on the SD card for post-mortem analysis. Unit tests were written for all elementary software blocks. The Falcon vehicle with this control system participated in the competition organised by the Hungarian company Aventics during May 2019. The Falcon ended on 8th place in long distance race and on 7th place in arcade race.
|
|
|
Multipurpose bicycle alarm
Albert, Matej ; Novotný, Radovan (referee) ; Levek, Vladimír (advisor)
This diploma project is about designing a concept of an anti-theft tracking device for a bicycle. The device is equipped with a GNSS module for tracking of current location, GSM module for sending the location data in case of a theft and a BT module for user settings via mobile phone. The bike theft detection is detected by an accelerometer. The final goal of this project is a concept of such a device for evaluation and improvement purposes.
|
|
|
Desing and implementation of the LCC converter application for emulation validating of the integrated LLC converters
Pokorný, Ondřej ; Levek, Vladimír (referee) ; Prokop, Roman (advisor)
This bachelor’s thesis deals with the design of an LLC converter, which will be used for the verification of prototypes of integrated circuit designs, as well as its applications. First, we address why we chose the LLC converter specifically for this application. We continue by analysing the specific type of converter and describe its function. The main point of this thesis is the numerical design with input parameters, which concludes with a simulation which verifies the calculated values. The product of the thesis is the design of the final wiring diagram of the LLC converter and the test board (module) and their realisation on PCB. The thesis concludes with a verification of the whole construction using a test board in a practical measurement. The work includes the author’s own design of a transformer, as well as a discussion on the problematics of the usage of magnetic circuits for LLC converters.
|
|
|
Indoor positioning system
Celeng, Michal ; Mašek, Jan (referee) ; Levek, Vladimír (advisor)
The work deals with the issue of indoor positiong system in the enviroment of the Android operating system, based on the efficient standard Bluetooth Low Energy, with conjunction of bluetooth beacons. The outcome of master‘s thesis is system topology, description of its components, standards needed for his creation and finally construction of the system.
|
|
|
A Design and Development of a Power Supply for Laptops in Ordinary Motor Vehicles
Urban, Michal ; Levek, Vladimír (referee) ; Šťáva, Martin (advisor)
Cílem této práce je navrhnout a sestavit napájecí zdroj pro notebooky různých výrobců pro použití v osobních a nákladních automobilech a na motocyklech s výstupním výkonem až 120W. Výsledný zdroj obsahuje USB-C konektor pro podporu napájení notebooků a chytrých zařízení s podporou Power Delivery, dále USB-A konektor s podporou Quick Charge 3.0 a také 12V automobilovou zásuvku pro možnost připojení dalšího automobilového příslušenství. Napájecí zdroj dále disponuje ochranou proti přepětí a přepólování vstupního napětí a také ochranou proti přetížení jednotlivých výstupů. Součástí zařízení je také LED displej, který uživateli umožňuje pomocí vstupního rozhraní jednoduše nastavit výstupní napětí pro notebook a sledovat aktuální hodnoty všech výstupů. Pro nastavování výstupu, indikaci a ochrany je použit mikrokontroler Arduino Nano.
|
|
|
Driver for ultra-bright white LED
Heralecký, Lukáš ; Čožík, Ondřej (referee) ; Levek, Vladimír (advisor)
The aim of this thesis is to study the possibilities of controlling high-brightness white LEDs using circuits operating at high voltages. The job itself is a division of existing light sources and mainly focus on semiconductor technology LED. The following describes the voltage of DC / DC and AC / DC. The work contains a description of the three high-voltage inverters are designed for power LEDs. Finally, it created a draft scheme of the PCB. As a control circuit is chosen ATMEGA 162 microcontroller from Atmel and source for LED diode is formed HV9910 and HV9861 circuits.
|
|
|
Home automation, input and output modules
Ponechal, Mikuláš ; Novotný, Radovan (referee) ; Levek, Vladimír (advisor)
The bachelor´s thesis mediates theoretical analysis of home automation using IoT application. The aim of the thesis is to desing input and output modules to make controlling of electronic devices easier for user. The first chapter describes wireless technologies which are mostly used in IoT applications, principles of measuring current in order to determine energy consumption and ways how to dim lights. The second chapter includes design of wireless communication between the modules and a central control station and specific module designs. The third chapter deals with the construction and testing of hardware modules.
|
|
|
Three-way control valve in industrial environment
Vozár, Viliam ; Čožík, Ondřej (referee) ; Levek, Vladimír (advisor)
This work deals with the design, realization and testing of the system for regulating the temperature of the water in an industrial environment using three-way mixing valve. This system can work autonomously, but also can be controlled by a superior control system. Created temperature regulation can be adjusted and controlled by a computer using control software.
|
guest ::
