|
Briccius Gauske of Görlitz in the context of stone-sculpture of the last third of the 15th century
Matějka, Milan ; Ottová, Michaela (advisor) ; Macek, Petr (referee)
This master thesis is focused on Briccius Gauzske, stone-scupturer od late 15th century. That was tracked in the archives in Görlitz, Wroclaw and Kutná Hora. It deals with the oeuvre subscipted to the artist by various art-historians of the 20th century (Kurt Bimler 1941, Mieczyslaw Zlat 1958, Eva Matějková 1962) that was critisised by Michaela Ottová (2007) later on. By catalogization of subsripted art-works (Frauentor in Görlitz, Nikolaitor and Rathaus in Wroclaw, St. Barbaras Church in Kutná Hora and so on.) Subsequently the catalogue part I was driven to believe that the early- hypotesis by the previous art-historians is relevant and Master Briccius was leader of the workshop shaping the apperance of Wroclaw and Kutná Hora. Than follows minor chapter about his stylistic origins that leads us to Jörg Syrlin sn. Workshop in Ulm, as was already said in literature (Michaela Ottová 2007)
|
|
The Late-Gothic architectural sculpture in Kutná Hora's Hrádek
Matějka, Milan ; Ottová, Michaela (advisor) ; Macek, Petr (referee)
The thesis is focused on architectural sculpture in Hrádek in Kutná Hora, a residence of Jan Smíšek z Vrchovišť, who was a rich and powerful private mine-owner and succesfull silver-ore provider. First chapter sums up current situation of research. The second chapter briefly introduces the owner of the building Jan Smíšek z Vrchovišť and tries to evaluate his porsonality as a donor. In fourth chapter follows an introduction to the history of the object. The fifth chapter is dedicated to the sculpture itself. It is focused on detailed description of the preserved works and tries to formal-analyse them. For the complicated units made of various sculptures it tries a culture-historical explanation. In the final chapter the works are divided by their quality or formal similarity. KEY WORDS Hrádek, Jan Smíšek z Vrchovišť, late-gothic, architectural sculpture, Briccius Gauske von Görlitz
|
|
Properties study of periodic gratings prepared by electron-beam lithography
Krátký, Stanislav ; Opletal, Petr (referee) ; Matějka, Milan (advisor)
This study examines the process of the relief periodic structures creation by way of electron beam lithography. It describes how to design these structures by means of a computer and subsequently how to create them by electron beam lithograph. Moreover, this study explores the methods by which these structures are measured and evaluated. These methods are used to measure and evaulate binary periodic gratings and thanks to obtained data it can be determined the dependence of the depth of grating on its period. The study also contains measurement of diffraction efficiency on manufactured gratings and comparison of the dependence of its diffraction efficiency on the depth of grating.
|
|
Submicron Structures with Deep Relief — Technology of Preparation
Matějka, Milan ; Kuřitka,, Ivo (referee) ; Mgr. Petr Klapetek Ph.D (referee) ; Kolařík, Vladimír (advisor)
The dissertation thesis is focused on research and development in the field of microfabrication by the technology of electron beam lithography. In the first part of this work, the extensive study is conducted in the field of technology of electron beam lithography in terms of physical principles, writing strategies and resist materials. This is followed with description of physical principles of etching for the transfer of relief structures into substrates. The thesis describes innovative techniques in modelling, simulation, data preparation and optimization of manufacturing technology. It brings new possibilities to record deep binary or multilevel microstructures using electron beam lithography, plasma and reactive ion etching technology. Experience and knowledge in the large area of microlithography, plasma and anisotropic wet-etching of silicon have been capitalized to the design process of manufacturing of nano-patterned membranes. It was followed with practical verification and optimization of the microfabrication process.
|
|
The silicon etching technology
Krátký, Stanislav ; Ježek,, Jan (referee) ; Matějka, Milan (advisor)
This thesis deals with the silicon etching technology. It Examines using of water solution of potassium hydroxide. It focuses on plasma etching of silicon using mixture of CF4 and O2 as the dry way of etching. Important parameters of etching like etching rate of silicon and masking materials, etching selectivity, surface roughness and underetching of mask are determined for both ways. Some additional processes has been examined as well, namely creating of mask of resist and silicon dioxide, lithography process and etching of resist using oxygen plasma.
|
|
Observation of Insulators in ESEM
Matějka, Milan ; Špinka, Jiří (referee) ; Jirák, Josef (advisor)
This graduation theses in introduction deals with principle and problems of electron signal detection in scanning electron microscopy and charging of insulating specimens in SEM. The experimental part of the thesis describe the methods of qualification and quantification of insulating specimen charging effect observed in environmental scanning electron microscope through the use of ionisation and scintillation detector in dependence on water vapour pressure in specimen chamber. The goal of the thesis is formation of the methodics useful to evaluate charging effect at insulating specimens observing and on the basis of measuring, determine optimal conditions for insulating specimen observation with ionisation and scintillation detector.
|
|
SMV-2023-01: Relief structures based on diffractive optics
Horáček, Miroslav ; Kolařík, Vladimír ; Matějka, Milan ; Krátký, Stanislav ; Chlumská, Jana ; Meluzín, Petr ; Král, Stanislav
Research and development in the field of physical realization of graphic and optical structures based on the principle of diffractive optics by means of electron beam lithography in a recording material supported by a silicon or glass board. The research covers the analysis of the graphical or optical motive, research and application of relief structures implementing the required graphic and optical properties, research and modeling of the physical possibilities of implementation of relief structures, preparation and analysis of technology of implementation of relief structures with regard to the limits of current scientific instruments, verification of theoretical considerations by means of relief structure sample exposure.
|
|
SMV-2023-02: Relief optical elements for shaping light bundles
Horáček, Miroslav ; Kolařík, Vladimír ; Matějka, Milan ; Krátký, Stanislav ; Chlumská, Jana ; Meluzín, Petr ; Král, Stanislav
Research and development in the field of relief optical elements for shaping light bundles, metrology of samples of relief optical elements using various microscopic techniques with regard to analysis of relief degradation in production processes, consulting in the field of lithographic processes focusing on electron beam and subsequent replication processes. Design and optimization of microoptic structures for various configurations of projector lighting systems, metrology of selected optical microstructured reliefs and optical function analysis, optimization of materials for replication of microoptical structures, consulting in the field of replication of deep microoptic elements for various optical surfaces.
|
|
SMV-2023-06: Development of test specimens for SEM
Matějka, Milan ; Krátký, Stanislav ; Meluzín, Petr ; Košelová, Zuzana ; Chlumská, Jana ; Horáček, Miroslav ; Kolařík, Vladimír ; Knápek, Alexandr
The study focuses on the research and development of precise calibration samples featuring relief structures. These samples are designed for calibrating parameters in scanning electron microscopes (SEM). The testing patterns enable the verification and calibration of magnification, orthogonality, and geometric distortion. The preparation of calibration specimens utilizes micro lithographic techniques tailored for silicon processing and other relevant technological procedures.
|
|
SMV-2023-05: DI2023
Matějka, Milan ; Krátký, Stanislav ; Meluzín, Petr ; Košelová, Zuzana ; Chlumská, Jana ; Horáček, Miroslav ; Kolařík, Vladimír ; Knápek, Alexandr
The research focuses on the investigation and development of precise calibration samples with relief structures. These samples are designed for calibrating parameters in scanning electron microscopes (SEM). Test patterns allow verification of the imaging quality through microscopic techniques such as overall magnification, field of view size, resolution, deformation in lateral axes, and other geometric distortions. Precision lithographic techniques and other methods derived from silicon processing technologies in the semiconductor industry are employed for sample preparation. The development has been directed towards optimizing the recording of etching masks before transferring the image onto a monocrystalline silicon substrate.
|