Název: Basic characteristics of sulfide catalysts for the direct decomposition of H2S
Autoři: Bonnet, Florian ; Kaluža, Luděk
Typ dokumentu: Výzkumné zprávy
Rok: 2024
Jazyk: eng
Edice: 1
Abstrakt: Sulfide catalysts are crucial in the hydrodesulfurization (HDS) of petroleum fractions, facilitating the hydrogenolysis of carbon-sulfur bonds. This process generates significant volumes of hydrogen sulfide (H2S), which is typically processed in the Claus unit. However, excess H2S can overwhelm the Claus process, creating both operational and environmental challenges. Researchers are now exploring sulfide catalysts for the direct thermo-catalytic decomposition of H2S to address this issue. Supported catalysts, like Mo/Al2O3, and commercial catalysts, considered typical monolayer-type well-dispersed catalysts, show the highest O2 uptake, ranging from 41.29 μmol/g for MoS2/Al2O3 (KLO) to 58.70 μmol/g for the commercial 715. Unsupported multilayer catalysts, such as Ni/MoWS2 (KKP), exhibit lower O2 uptake at 2.54 μmol/g, though it demonstrates high HDS activity with thiophene. Moreover, O2 uptake effectively describes the sintering of the Mo monolayer phase during the thermocatalytic reaction of H2S at 800°C. These O2 uptakes clearly correlate with the XRD patterns, where the MoS2 phase is X-ray amorphous with an O2 uptake of about 19.04 μmol/g, while the MoS2 phase in the spent catalyst shows certain crystallinity exhibiting an average particle size by Scherrer equation of about 6 nm and the O2 uptake of 1.63 μmol/g. O2 chemisorption thus serves as a valuable measure of the dispersion of Mo sulfides. The results obtain with the study of CoMo/Al2O3 (KJJ-family catalysts), highlight the correlation between the increasing amount of adsorbed O2 with the increasing nominal loading of MoO3 and the increasing rate constant of thiophene kTH. This research reveals the potential of these catalysts in hydrocarbon refining. The findings underline the connection between catalytic chemistry, process engineering, and environmental sustainability, with the objective to enhance industrial refining processes.
Klíčová slova: H2S decomposition; O2 chemisorption; sulfide catalyst
Číslo projektu: TK05020059
Poskytovatel projektu: GA TA ČR

Instituce: Ústav chemických procesů AV ČR (web)
Informace o dostupnosti dokumentu: Dokument je dostupný v příslušném ústavu Akademie věd ČR.
Původní záznam: https://hdl.handle.net/11104/0354494

Trvalý odkaz NUŠL: http://www.nusl.cz/ntk/nusl-620402


Záznam je zařazen do těchto sbírek:
Věda a výzkum > AV ČR > Ústav chemických procesů
Zprávy > Výzkumné zprávy