Original title:
Návrh výroby držáku zásuvky
Translated title:
Production design of the plug holder
Authors:
Janoška, Lukáš ; Štroner, Marek (referee) ; Podaný, Kamil (advisor) Document type: Bachelor's theses
Year:
2024
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Bakalářská práce se zabývá výrobou držáku zásuvky u tažných zařízení. Jako materiál je zvolena měkká ocel 11 321, která bude následně žárově zinkována. Součást bude vyráběna ze svitků plechu o tloušťce 2 mm v celkové sérii 100 000 ks/rok. Z uvažovaných variant výroby je zvolena technologie stříhání a ohýbání ve sdruženém nástroji. Celá součást bude zhotovena ve čtyřech krocích s celkovou využitelností materiálu 89,35 %. Pro výrobu je nutné celková tvářecí síla 530 kN. Návrh nástroje je proveden na základě zvoleného technologického postupu. Jako výrobní stroj je zvolen excentrický lis Mecanica Exacta model DM-S od výrobce Formetal, který bude následně zaváděn do automatizované linky.
The bachelor thesis is focused on the production of a socket holder for towing devices. The chosen material is mild steel 11 321, which will be subsequently galvanized. The component will be manufactured from 2 mm thick coils of sheet metal in a total production of 100,000 pieces/year. Of the production variants considere, the technology of cutting and bending in a combined tool was chosen. The whole component will be manufactured in four steps with an overall material availability of 89,35 %. A total forming force of 530 kN is required for production. The design of the tool was based on the selected technological process. Mecanica Exacta model DM-S eccentric press from Formetal was chosen as the production machine, which will be subsequently introduced into the automated line.
Keywords:
bending; coil; combined tool; shearing; sheet metal forming; steel 11 321; ocel 11 321; ohýbání; plošné tváření; sdružený nástroj; stříhání; svitek
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: https://hdl.handle.net/11012/247111