Original title:
Výroba řemenice pro mikrořemeny na SPN 12CNC/Sinumerik 810D
Translated title:
Production of pulley for micro-belts at SPN 12CNC/Sinumerik 810D
Authors:
Juránek, Martin ; Dvořák, Jaromír (referee) ; Píška, Miroslav (advisor) Document type: Master’s theses
Year:
2024
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Práce se zabývá výrobou dvou drážkových řemenic na soustruhu SPN 12 CNC. V úvodní kapitole se práce krátce zmiňuje o převodech a jejich rozdělení. Dále jsou zde nastíněny hlavní výhody drážkových řemenic oproti klasickým klínovým řemenicím. Nechybí zde geometrie a výpočtové vztahy silových poměrů v jednoduchém řemenovém převodu. Praktická část navrhuje několik metod tvorby možného CNC programu pro výrobu samotných drážek. Z možných metod je využita metoda tvorby kontury pomocí přírůstkového programování za pomoci početní smyčky FOR je vytvořeno 6 drážek. Tento program je využit pro samotnou výrobu drážek. Práce je rovněž doplněna o metodiku měření funkčních rozměrů drážek a nechybí zde rovněž měření parametrů břitové destičky, se kterou byly drážky vyrobeny.
As the tittle itself suggests, this thesis deals with the production of two two poly-V pulleys on the lathe SPN 12 CNC. In the first chapter, the thesis mentions transmissions and its types. Furthermore, the main advantages of poly-V pulleys compared to classic V-pulleys are outlined here. There is also geometry and calculation relationships of power ratios in a simple belt transmission. The practical part suggests several methods of creating a possible CNC program for the production of the grooves themselves. The practical part suggests several methods of creating a possible CNC program for the production of the grooves themselves. Among the possible methods, the contour creation method using incremental programming is used, and 6 grooves are created using the FOR counting loop. The work is also supplemented about the methodology for measuring the functional dimensions of the grooves, and there is also the measurement of the parameters of the insert with which the grooves were made.
Keywords:
groove; machining; Poly-V pulley; programming; drážka; obrábění; programování; Řemenice
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: https://hdl.handle.net/11012/249100