Název: The Influence of the Human Factor on the Measurement Results Acquired by Using the Resistance Drilling Device RinnTech Resistograph R650-EA
Autoři: Dziadková, Aneta ; Heřmánková, Věra ; Anton, Ondřej ; Szórád, Martin
Typ dokumentu: Příspěvky z konference
Jazyk: eng
Nakladatel: Vysoké učení technické v Brně,Fakulta stavební
Abstrakt: The diagnostics of wooden structures using the detection drill RINNTECH Resistograph R650-EA is one of the popular semi-destructive methods. This article deals with the issue of the influence of the human factor on the measurement results. The recommended testing direction is the radial direction, perpendicular to the grain. However, the desired direction is sometimes difficult to maintain. The experiment takes into account three different factors that may occur during the testing. The goal is to determine to what extent the human factor affects the measured results. Thanks to the conducted research, it was found that gradual tilting of the device during measurements influences the measurements most significantly.
Klíčová slova: human factor influence; resistance characteristics; resistance micro-drilling; resistograph; Wood diagnostics
Zdrojový dokument: Juniorstav 2024: Proceedings 26th International Scientific Conference Of Civil Engineering, ISBN 978-80-86433-83-7

Instituce: Vysoké učení technické v Brně (web)
Informace o dostupnosti dokumentu: Plný text je dostupný v Digitální knihovně VUT.
Původní záznam: https://hdl.handle.net/11012/245424

Trvalý odkaz NUŠL: http://www.nusl.cz/ntk/nusl-614413