Original title:
Nadstavba programu WinCC - parametrizace PLC aplikace
Translated title:
Extension of WinCC program - parameterisation of PLC application
Authors:
Sysel, Radek ; Pásek, Jan (referee) ; Štohl, Radek (advisor) Document type: Bachelor's theses
Year:
2013
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií Abstract:
[cze][eng]
Cílem této bakalářské práce je navrhnout parametrizaci PLC aplikace a seznámit se se systémem řízení parních turbín vyráběných firmou Siemens v Brně. Orientovat se ve vizualizačním programu WinCC a propojit ho se Simatic STEP 7, který následně komunikuje s PLC. Následně na základě těchto poznatků vytvořit funkční aplikaci, která se začlení do jejich aplikace. Funkční aplikace a jejich aplikace budou spolu spolupracovat. Po provedení teoretického návrhu jsem přistoupil k praktické realizaci dané aplikace. Nejdříve jsem si připravil funkční bloky ve STEP 7. Poté jsem přistoupil ke grafické realizaci v programu WinCC. Na závěr jsem ověřil funkčnost a uvedl, jakým dalším směrem by se daná aplikace měla ubírat.
The aim of bachelor´s thesis is to propose parameters PLC applications and introduce a management system for steam turbines manufactured by Siemens in Brno. Be familiar with WinCC visualization program and link it with Simatic STEP7, which then communicates with the PLC. Subsequently, on the basis of this knowledge to create a functional application that is integrated into their applications. The functional application and their application will coordinate with each other. After the theoretical design I came to the practical implementation of the application. First, I prepared the functional blocks in STEP 7. Then I went to the graphic’s implementation in WinCC program. In conclusion, I verified the functionality and I stated the other direction to which the application should take.
Keywords:
functional blocks; PLC; programming language C; security system; Simatic STEP 7; simulation; steam turbine.; visualization; WinCC; funkční bloky; jazyk C; parní turbína.; PLC; Simatic STEP 7; simulace; vizualizace; WinCC; zabezpečovací systém
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/27480