Original title:
Popis napjatosti a deformace na čele trhlin zatížených ve smykových zátěžných módech
Translated title:
Description of Stress and Strain States at the Front of Cracks Loaded by Shear Modes
Authors:
Žák, Stanislav ; Majer, Zdeněk (referee) ; Horníková, Jana (advisor) Document type: Master’s theses
Year:
2014
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Cílem této práce je porovnání velikosti plastické zóny na čele trhliny, určené analytickým lineárním a elasto-plastickým řešením za využití metody konečných prvků (program ANSYS). Výpočty jsou prováděny pro trhlinu zatíženou pouze ve smykových módech, protože tento typ zatížení není podle dostupných literárních pramenů dostatečně popsán. První část práce je zaměřena na teoretický úvod do problematiky určování velikosti plastické zóny na základě lineárních a nelineárních parametrů lomové mechaniky. Druhá část je věnována konstrukci výpočtového modelu v programovém prostředí ANSYS. Geometrie vzorků a úrovně zatížení byly voleny na základě projektu, jehož cílem bylo experimentálně ověřit vliv smykových módů na chování trhliny. V třetí části práce jsou detailně porovnány velikosti plastické zóny (její charakteristický rozměr) na čele trhliny pro smykové módy II a III, zjištěné různými metodami. V poslední části textu je pak stejný postup aplikován na smíšený mód II+III. Výstupem diplomové práce je zhodnocení vhodnosti a mezí použitelnosti lineárního řešení pro velikost plastické zóny na čele trhliny pro konkrétní geometrii a model materiálu.
The main goal of this work is the comparison of the size of the plastic zone at the crack tip for two analysis methods: an analytical linear method and an elastic-plastic analysis employing the Finite Element method (ANSYS software). All calculations were made for a crack loaded under pure shear modes. These types of loading are not sufficiently described in the literature. The first part of this work introduces the problem with the crack tip plastic zone using both linear and nonlinear fracture parameters. The second part is dedicated to the construction of the Finite Element model in the ANSYS software. The geometry of the samples and the loading levels were chosen to match an existing experimental test of the impact of shear modes on the crack behavior. In the third part of this thesis, the plastic zone radii for pure shear modes II and III are estimated using several methods and the results are compared. In the last part of this work, the same procedure as in the previous part is applied on a mixed-mode II+III loading. A result of this thesis is the assessment of the application limits of the linear analysis method used to estimate the size of the plastic zone at the crack tip for a specific geometry and material model.
Keywords:
ANSYS; crack tip plasticity; elastic-plastic fracture mechanics; Finite Element method; J-integral; linear elastic fracture mechanics; shear loading; ANSYS; elasto-plastická lomová mechanika; J-integrál; lineární elastická lomová mechanika; metoda konečných prvků; plastická zóna na čele trhliny; smykové zátěžné módy
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/31504