Original title:
Výroba závěru zbraně
Translated title:
Production of weapon conclusion
Authors:
Diviš, Adam ; Forejt, Milan (referee) ; Lidmila, Zdeněk (advisor) Document type: Master’s theses
Year:
2020
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Práce se zabývá návrhem technologie výroby závěru zbraně zápustkovým kováním. Závěr zbraně bude vyráběn z materiálu C45 v sérii 500 000 ks za rok. Polotovar bude před kováním upraven pomocí technologie příčného klínového válcování. Díky zvolenému výrobnímu postupu bude výkovek zhotoven jako čtyř kus. Pro vytvořený návrh byla provedena simulace procesu kovaní, jež ukázala nedotečení kovu v celém objemu dutiny. Na základě těchto výsledků byly provedeny úpravy a znovu provedena simulace. Dle výsledků druhé simulace již došlo k vyplnění dutiny kovem. Pro kování byl zvolen stroj LZK 2500 P od firmy Šmeral a.s. se jmenovitou silou 25 MN. Na závěr bylo provedeno technicko-ekonomické zhodnocení nákladů na materiál pro výrobu celé série.
The thesis deals with the design of technology for production of weapon conclusion by die forging. The weapon conclusion will be made of C45 steel in series of 500 000 pieces per year. Before forging, the base semi-finished product will be treated using cross-wedge rolling technology. Thanks to the chosen production process, the forging will be made as four pieces. A simulation of the forging process was made for the created design. Results of a simulation showed that metal did not fill entire hollow. Based on these results was made changes in design and the simulation was performed again. According to the results of the second simulation, the hollow has already been filled with metal. For the forging was chosen the machine LZK 2500P from Šmeral a.s with a nominal force 25MN. In the conclusion there was a technical-economic evaluation of costs for the material required for production of entire series.
Keywords:
C45 steel; cross wedge rolling; die forging; volumetric forming; weapon conclusion.; objemové tváření; Ocel C45; příčné klínové válcování; zápustkové kování; závěr zbraně.
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/191832