Original title:
Návrh ohýbacího přípravku pro tenké plechy
Translated title:
Design jig bending of thin sheets
Authors:
Šrotíř, Petr ; Štroner, Marek (referee) ; Dvořák, Milan (advisor) Document type: Master’s theses
Year:
2013
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Cílem diplomové práce je návrh a výroba funkčního ohýbacího přípravku pro technologickou zkoušku plechů ohybem v předvýrobní etapě na limitní poloměr ohybu u ocelových plechů do tloušťky 2 mm, případně neželezných plechů do tloušťky 3 mm. Požadovaný úhel ohybu je v intervalu od nuly do devadesáti stupňů. Funkčnost přípravku bude ověřena reálnou zkouškou odpružení. Součástí návrhu budou doložené technologické a ekonomické výpočty a technicko – ekonomické zhodnocení výroby ohýbacího přípravku.
The aim of this master´s thesis is the design, proposal and production of a functional jig for technological testing of metal sheet by bending in the pre-production stage to the limit bend radius of the steel sheet up to a thickness of 2 mm, or in case of non-ferrous metal to a thickness of 3 mm. The required bending angle is in the range from zero to ninety degrees. The functionality of the jig will be verified by a practical testing of springing. The proposal will be supported by technological and economic calculations and technical - economic evaluation.
Keywords:
bending radius; jig bending; sheet forming; springing; thin sheet; bending radius; jig bending ohýbání; odpružení; ohýbací přípravek; poloměr ohybu; sheet forming; springing; tenký ocelový plech; thin sheet
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/23792