Original title:
Výroba součásti Klec ECR 10 12
Translated title:
Production of component the Cage ECR 10 12
Authors:
Jílek, Josef ; Heinl, Tomáš (referee) ; Žák, Ladislav (advisor) Document type: Master’s theses
Year:
2019
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Práce se zabývá návrhem technologie výroby součásti Klec ECR 10 12, která společně s maticí slouží jako montážní prvek při výrobě autobusů. Navržený plechový dílec z oceli 11 321 tloušťky 1,5 mm je vyráběn v roční sérii 10 000 ks. Pro výrobu součásti byla na základě literární studie navržena technologie výroby ve sdruženém postupovém nástroji, který v sobě kombinuje stříhání a ohýbání. Na základě technologických výpočtů byl navržen nástroj a podle celkové tvářecí síly zvolen stroj. Jako tvářecí stroj pro upnutí nástroje byl zvolen výstředníkový lis LEN 63 C se jmenovitou silou 630 kN.
The thesis focuses on the production concept of component Cage ECR 10 12, which is used as assembly element together with a nut during the bus production. Sheet metal part is made from 11 321 steel 1,5 mm thick in production 10 000 parts per year. Technology of production in progressive tool was selected based on literature study. Progressive tool combines technology of shearing and bending. Tool was designed after the technological calculations. Forming machine was selected after the stamping force calculation. Eccentric press LEN 63 C with 630 kN forming force was selected for production.
Keywords:
11 321 steel; bending; progressive tool; shearing; sheet metal forming; Ocel 11 321; ohýbání; plošné tváření; postupový nástroj; stříhání
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/179120