Název:
PROGRESIVNÍ VÝROBNÍ POSTUPY A MODELOVÁNÍ STRUKTUR A VLASTNOSTÍ LITIN S KULIČKOVÝM GRAFITEM
Překlad názvu:
PROGRESSIVE PRODUCTION PROCESSES AND SIMULATION OF STRUCTURES AND PROPERTIES OF SPHEROIDAL GRAPHITE CAST IRON
Autoři:
Musilová, Iveta ; Mores, Antonín (oponent) ; Pacal, Bohumil (oponent) ; Šenberger, Jaroslav (vedoucí práce) Typ dokumentu: Disertační práce
Rok:
2010
Jazyk:
cze
Nakladatel: Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstrakt: [cze][eng]
Práce se zabývá posouzením vazeb mezi progresivními technologickými postupy výroby litin s kuličkovým grafitem a jejich strukturními vlastnostmi. Hlavním cílem práce je objasnění příčinných souvislostí mezi parametry navržených výrobních technologií litin (zahrnuje vybrané varianty modifikace a očkování taveniny a parametry její krystalizace, tuhnutí a chladnutí ve slévárenské formě), strukturou a chemickou heterogenitou prvků v této struktuře. K bližší specifikaci výše uvedených vazeb byl využit prostorový model růstu grafitu kulového tvaru, který vznikl na FSI VUT v Brně. Na základě aplikace tohoto modelu na experimentálně získaná data byla ověřena jeho použitelnost pro praxi. Zmiňovaný model U GRAFIT 20 autorů Stránského a Milliona počítající segregaci v rámci eutektické buňky zatím nebyl ve větším rozsahu použit pro predikci segregace v reálných podmínkách. Na základě uvedeného modelu byla tedy u experimentálních taveb zjištěna mikrosegregace v rámci „průměrně“ buňky. Mikrosegregace byla popsána indexem segregace a indexem heterogenity. Vypočtené hodnoty indexu segregace a heterogenity pak byly porovnány s hodnotami experimentálně ověřenými. Na základě porovnání vypočtených a naměřených hodnot byla posouzena možnost dalšího použití uvedeného modelu v praxi.
The thesis is concerned with relationships between progressive technological processes of spheroidal graphite cast iron’s production and their structural properties. The aim of the work is to explain causal relationship between parameters of the proposed manufacturing technology of the iron type given (involving selected variants of modification and inoculation of melt and the parameters of melt crystallization, solidification and cooling down in a mould), their structure and even chemical heterogeneity of elements in this structure. For close specification of presented relationships three-dimensional model of spheroidal graphite growth was used, which was developed at the Brno University of Technology, Faculty of Mechanical Engineering. Its usability in praxis has been verified on the basisis of the application of this model on experimentally acquired data. The U GRAFIT 20 model of the authors Stránský and Million counting segregation in the frame of eutectic cell has not still been used for prediction of segregation in real condition in greater extent. On the basis of the above mentioned model microsegregation within “on average” of the cell has been discovered during experimental melts. Microsegregation has been described by segregation and heterogeneity indexes. Calculated values of segregation and heterogeneity indexes have been compared with experimentally verified values. On the basis of comparison of calculated and measured values the possibility of further usage of the mentioned model in praxis has been explored.
Klíčová slova:
chemická heterogenita; index heterogenity; index segregace; Litina s kuličkovým grafitem; model růstu kuličkového grafitu; chemical heterogeneity; index of heterogeneity; index of segregation; model of nodular graphite growth; Spheroidal graphite cast iron
Instituce: Vysoké učení technické v Brně
(web)
Informace o dostupnosti dokumentu:
Plný text je dostupný v Digitální knihovně VUT. Původní záznam: http://hdl.handle.net/11012/4375