Original title:
Výroba unášecího čepu objemovým tvářením
Translated title:
Bulk forming technology of carrier pin
Authors:
Sejkora, Petr ; Samek, Radko (referee) ; Forejt, Milan (advisor) Document type: Master’s theses
Year:
2014
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Diplomová práce se zabývá návrhem výroby unášecího čepu z oceli 17 021 pomocí objemového tváření za studena se zaměřením na pěchování a protlačování. Pro výrobu byly navrţeny 2 varianty technologického postupu, z nichţ byla jedna vybrána jako optimální. U vybrané varianty byly provedeny výpočty deformace, přetvárných a deformačních odporů a tvářecích sil. Na základě celkové tvářecí síly 660 kN byl vybrán stroj pro výrobu součásti TPM 12. Dále byly navrţeny tvářecí nástroje pro 2. operaci – dopředné protlačování. Nakonec bylo provedeno technickoekonomické zhodnocení.
Diploma thesis focus on the proposal of the carrier pin production from the steel 17 021 by cold bulk forming technology with sight on the upsetting and extrusion. There were suggested two versions of the technological plan from which was one chosen as optimal. There were carried out calculation of deformation, forming and deformation resistances and forming forces for the chosen version. Machine for the part TPM 12 production was chosen on the basis of the global forming force 660 kN. Furthermore there were proposed forming tools for the second operation – feed forward extrusion. Finally there was made technical and economical evaluation.
Keywords:
deformation resistance; extrusion; forming force; tool; upsetting; deformační odpor; nástroj; protlačování; pěchování; tvářecí síla
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/32500