Original title:
Hodnocení rozměrové a tvarové přesnosti součástí vyrobených z plastu
Translated title:
Evaluation of dimensional and shape accuracy of components made of plastic
Authors:
Tuza, Marek ; Dobrocký, David (referee) ; Sedlák, Josef (advisor) Document type: Master’s theses
Year:
2022
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Cílem této diplomové práce je hodnocení rozměrové a tvarové přesnosti součástí vyrobených z plastu. K tomu bylo využito celkem 10 vzorků vyrobených dvěma typy výroby, extruzí a 3D tiskem metodou FFF. Polotovary byly po výrobě frézovány, čímž vznikly vzorky o požadovaných rozměrech. Vzorky byly frézované z jedné strany bez chladicí emulze a z druhé strany s chladicí emulzí, která měla významný vliv na výsledné hodnoty tvarové přesnosti. Obrobeno bylo tedy celkem 20 ploch k hodnocení. Pro hodnocení rozměrů byly vybrány dva parametry, a to vzdálenost a rovnoběžnost. Při měření tvarů bylo hodnoceno 11 parametrů, a to pomocí 2D profilu drsnosti a 3D textury povrchu. Jedním z nejpoužívanějších parametrů, který byl hodnocen při měření tvarů, byla průměrná aritmetická odchylka profilu, která se značí Ra. Z výzkumu práce bylo zjištěno, že nejvyšší přesnosti byly naměřeny u materiálu PA, který byl vyrobený 3D tiskem a obrobený s chladicí emulzí. V závěru praktické části autor také vytváří doporučení vzhledem k praktickému využití materiálů.
The aim of this thesis is to evaluate the dimensional and shape accuracy of components made of plastic. A total of 10 samples, produced by two types of production, extrusion and 3D printing using the FFF method, were used for this purpose. The semi-finished products were milled after production, which resulted in samples of the required dimensions. The samples were milled on one side without cooling emulsion and on the other side with cooling emulsion, which significantly affected the resulting shape accuracy values. Thus, a total of 20 surfaces were evaluated. Two parameters were selected to evaluate the dimensions, namely distance and parallelism. When measuring the shapes, 11 parameters were evaluated using a 2D roughness profile and a 3D surface texture. One of the most used parameters that was evaluated when measuring shapes was the arithmetic mean deviation of the roughness profile, which is denoted as Ra. The research found that the highest accuracies were measured for the material PA produced by 3D printing and milled with a cooling emulsion. At the end of the practical part, the author also makes recommendations regarding the practical use of materials.
Keywords:
3D printing; Dimension; Extrusion; Machining; Milling; Plastic; Shape; 3D tisk; extruze; frézování; obrábění; plast; rozměr; tvar
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/206334