Original title:
Návrh konstrukce mobilního autonomního robotu
Translated title:
Design of autonomous mobile robot.
Authors:
Vodrážka, Jakub ; Marada, Tomáš (referee) ; Věchet, Stanislav (advisor) Document type: Master’s theses
Year:
2010
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Tato diplomová práce se zabývá návrhem konstrukce prostředku pro testování lokalizačních metod pro indoor navigaci. Jako vhodný prostředek pro testování byl navržen autonomní robot. Práce je rozdělena do tří částí. V první části je popsáno rozdělení robotů, jejich možné využití a jsou zde také uvedeny použitelné snímače při řešení tohoto problému. Druhá část pojednává o návrhu a konstrukci robotu. Ten je postaven na podvozku diferenciálního typu s opěrnou ostruhou. Jako pohonné jednotky slouží dva elektromotory s převodovkou a snímačem otáček výstupní hřídele. Plášť robotu byl navržen s ohledem na jeho funkčnost, ale i celkový vzhled. Robot má zároveň sloužit pro prezentaci robotiky. Konstrukce zahrnuje také návrh řídící jednotky a snímačů. V poslední části je popsán statistický model pohybu robotu, v rámci kterého bylo provedeno několik experimentů. Ty měly za úkol zjistit případné odchylky při měření pohybu snímači robotu od skutečnosti.
The thesis deals with design of the device for testing the localization techniques for indoor navigation. Autonomous robot was designed as the most appropriate platform for testing. The thesis is divided into three parts. The first one describes various kinds of robots, their possible use and sensors, which could be of use for solving the problem. The second part deals with the design and construction of the robot. The robot is built on the chassis of the differential type with support spur. Two electric motors with a gearbox and output shaft speed sensor represent the drive unit. Coat of the robot was designed for good functionality and attractive overall look. The robot is also used for the presentation of robotics. Thesis provides complete design of chassis and body construction, along with control section and sensorics. The last part describes a statistical model of the robot movement, which was based on several performed experiments. The experiments were realized to find any possible deviations of sensor measurement comparing to the real situation.
Keywords:
a statistical model of the motion; Autonomous robot; navigation methods; odometry.; testing indoor navigation; Autonomní robot; navigační metody; odometrie.; statistický model pohybu; testování indoor navigace
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/17529