Original title:
Výroba úchytky
Translated title:
Production of a clamp
Authors:
Svoboda, Petr ; Forejt, Milan (referee) ; Podaný, Kamil (advisor) Document type: Master’s theses
Year:
2023
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Práce předkládá návrh technologie výroby úchytky ve společnosti FERRUM s.r.o. Slouží ke spojení podlahových roštů k nosné konstrukci. Je vyráběna z plechu z materiálu DC01 tloušťky 2 mm v sérii 3 500 ks měsíčně s následnou povrchovou úpravou ve formě žárového zinkování. Z navrhovaných možností výroby byla zvolena technologie stříhání a ohýbání v postupovém sdruženém nástroji. Výroba proběhne ve čtyřech krocích, v prvním se obstřihne vnější obrys, během druhého dojde k ohybu krátkých ramen, ve třetím je vystřihnut otvor pro šroub, v posledním je vytvořen ohyb dlouhého ramene a dílec je oddělen od zbytku polotovaru. Návrh nástroje byl vypracován s ohledem na výrobní možnosti obráběcího centra společnosti. Jsou jimi soustružení, frézování, vrtání a broušení. K výrobě je zapotřebí tvářecí síla 387 kN a bude probíhat na výstředníkovém stroji LEN 63 C, nacházejícím se ve strojovém parku společnosti.
The thesis presents a proposal for the production technology of the clamp in the company FERRUM s.r.o. It is used to connect floor grates to the supporting structure. It is manufactured from 2 mm thick DC01 sheet metal in a series of 3,500 pieces per month with subsequent surface treatment in the form of hot-dip galvanizing. From the proposed production possibilities, the technology of shearing and bending in a combined tool was chosen. Production takes place in four steps, in the first the outer contour is trimmed, in the second the short arms are bent, in the third the hole for the screw is cut, in the last the long arm is bent, and the part is separated from the rest of the blank. The design of the tool has been developed considering the production capabilities of the company's machining centre. These include turning, milling, drilling and grinding. The production requires a forming force of 387 kN and will be carried out on a LEN 63 C eccentric press located in the company's machine park.
Keywords:
bending; combined tool; DC01 steel; LEN 63 C; shearing; sheet metal forming; LEN 63 C; ocel DC01; ohýbání; plošné tváření; sdružený nástroj; stříhání
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/213387