Original title:
SPECIÁLNÍ POLYMERNÍ NÁTĚROVÉ A STĚRKOVÉ HMOTY S VYUŽITÍM DRUHOTNÝCH SUROVIN
Translated title:
SPECIAL POLYMER COATINGS AND SCREEDS MATERIALS WITH USE OF SECONDARY RAW MATERIALS
Authors:
Žlebek, Tomáš ; Seidlová, Michaela (referee) ; Bydžovský, Jiří (referee) ; Ďurica, Tibor (referee) ; Drochytka, Rostislav (advisor) Document type: Doctoral theses
Year:
2022
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta stavební Abstract:
[cze][eng]
Práce se zabývá vývojem nových polymerních nátěrových a stěrkových hmot – konkrétně epoxidových, polyuretanových a vinylesterových s využitím nebezpečných odpadů ve formě plniv. Neustále se rozšiřují oblasti, které jsou určeny k jejich skládkování a náklady na uložení těchto odpadů jsou vysoké. Jejich užíváním dochází k eliminaci negativních dopadů na životní prostředí, ale i k nezanedbatelným úsporám finančním. V rámci této disertační práce byl vyvíjen vhodný způsob úpravy vybraných nebezpečných odpadů a experimentálně ověřovány možnosti využití takovýchto speciálně připravených plniv do polymerních nátěrových a stěrkových hmot. Tyto nátěry a stěrky jsou určeny především na betonový podklad, ale byla ověřována možnost použití i na kovový podklad, asfalt a cementotřískové desky. Tyto hmoty slouží jako sekundární ochrana konstrukcí před nepříznivými vlivy povětrnostních podmínek. Jako plnivo byly použity druhotné suroviny, kterými byl fluidní filtrový popílek kontaminovaný vlivem denitrifikace spalin a speciálně upravené nebezpečné odpady (solidifikáty). Snahou bylo progresivní využití těchto surovin v co největším množství, aby se v maximální míře omezilo skládkování. Nebezpečné odpady bylo nutné upravit takovým způsobem, aby byla provedena co nejúčinnější solidifikace. Podrobně byl zkoumán účinek solidifikace, dále chování solidifikátu v polymerní matrici, rozložení částic ve struktuře a narušení nátěrů a stěrek vlivem chemického namáhání.
The work deals with the development of new polymeric coatings and screeds – epoxy, polyurethane and vinyl ester materials with the use of hazardous waste in the form of fillers. The areas that are destined for their landfill are constantly expanding and the costs of disposing of this waste are high. Their use eliminates negative impacts on the environment, but also leads to significant financial savings. The aim of this PhD thesis was to find a suitable way to treat selected hazardous waste and experimentally verify the possibilities of using the fillers pre-treated by optimal way in polymer coatings and screeds. The coatings and screeds are intended primarily for concrete substrates but the possibility of use on metal substrates, asphalt and cement-bonded particle boards was also been verified. These materials serve as a secondary protection of structures against the adverse effects of weather conditions. Secondary raw materials were used as fillers, which were fluidized bed combustion fly ash contaminated due to flue gas denitrification and specially pre-treated hazardous waste (solidification products). The aim was to proceed progressive use of the secondary raw materials as much as possible in order to reduce landfilling in the maximum possible way. It was necessary to treat hazardous waste in such a way that the most effective solidification would be achieved. The behavior of the solidifaction products in the polymer matrix, the distribution of particles in the structure and the disruption of coatings and screeds due to chemical stress were also investigated.
Keywords:
chemical resistance; Coating materials; ecological aspects.; epoxy resin; fly ash; hardness; hazardous waste; long-term durability; mechanical resistance; microstructure; polyurethane resin; screed materials; secondary raw materials; solidification; vinyl ester resin; chemická odolnost; druhotné suroviny; ekologické aspekty.; epoxidová pryskyřice; fluidní popílek; mechanická odolnost; mikrostruktura; nebezpečný odpad; Nátěrová hmota; polyuretanová pryskyřice; solidifikace; stěrková hmota; trvanlivost; tvrdost; vinylesterová pryskyřice
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/208550