Original title:
Návrh přední odpružené vidlice s MR tlumičem pro sjezdová kola
Translated title:
Design of DH bike fork with magnetorheological damper
Authors:
Salva, Matúš ; Robenek, Dětřich (referee) ; Strecker, Zbyněk (advisor) Document type: Master’s theses
Year:
2022
Language:
slo Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[slo][eng]
Pri jazde na horskom bicykli cez nerovný terén je často limitujúcim faktorom komfort jazdy a dostatočný prítlak kolesa. Preto je neustála snaha inovovať odpruženie a vyvíjať tlmiče poskytujúce lepšie tlmiace vlastnosti. Použitie semi-aktívneho odpruženia je jednou z možností ako dosiahnuť požadované zlepšenie v porovnaní s pasívnymi systémami používaným v súčasnosti. V tejto práci bolo cieľom vyvinúť magnetoreologický tlmič, ktorý je vhodný pre implementáciu do bežne dostupných vidlíc horského bicykla a ktorého tlmiace charakteristiky umožňujú využitie algoritmu Skyhook. Bol vytvorený funkčný vzor MR tlmiča so zdvihom 240 mm a vonkajším priemerom 29,5 mm, ktorého dynamický rozsah je 9,5 pri piestovej rýchlosti 0,25 ms-1 a časová odozva 17 ms. Magnetický obvod vyrobeného funkčného vzoru je z materiálu 11SMn30. Tlmič slúžil na overenie funkčnosti konceptu a zároveň jeho tlmiace charakteristiky boli experimentálne overené a porovnané s predikovanými hodnotami. Vďaka kombinácii numerického a analytického modelu bola dosiahnutá veľmi dobrá zhoda medzi predikciou a experimentom. Z toho dôvodu je následne možné navrhnutý MR tlmič vyrobiť s magnetickým obvodom z materiálu Hiperco/Vacoflux 50, ktorého predikovaný dynamický rozsah je 9,5 a časová odozva je menšia než 10 ms. Výsledná celková hmotnosť návrhu je 0,68 kg. Tento návrh plne vyhovuje všetkým požiadavkám. V prípade jeho použitia v kombinácii so semi-aktívnym riadením pomocou algoritmu Skyhook je predpoklad zlepšenia komfortu jazdy o 28 % [1]. Potenciál využiť navrhnutý MR tlmič je v spojení so stále rozšírenejšími elektrobicyklami a to najmä z dôvodu vyššej hmotnosti tlmiča. Zároveň sa však nevylučuje možnosť využitia na bežnom bicykli. Semi-aktívne odpruženie je nová a doposiaľ nie veľmi rozšírená technológia v oblasti cyklistiky a má potenciál osloviť nový okruh spotrebiteľov. Po zvážení všetkých výhod a nevýhod je možné konštatovať, že navrhnutý MR tlmič umožňuje vylepšiť jazdné vlastnosti horských bicyklov ako v oblasti komfortu jazdy, trakcie kolesa alebo v podobe zníženia výdaju energie pri pedálovaní vplyvom pohltenia energie odpružením.
When mountain biking over rough terrain, comfort and sufficient wheel pressure are often the limiting factors. That's why there is an effort to innovate suspension and develop dampers that provide better damping characteristics. The usage of semi-active suspension is one way to achieve the desired improvement over the currently used passive systems. In this work, the aim was to develop a magnetorheological damper that is suitable for implementation in commonly available mountain bike forks and whose damping characteristics allow the use of the Skyhook algorithm. A functional model of an MR damper with a stroke of 240 mm and an outer diameter of 29.5 mm, whose dynamic range is 9.5 at a piston velocity of 0.25 ms-1 and a time response of 17 ms, was developed. The magnetic circuit of the manufactured functional pattern is of 11SMn30. The damper served to verify the functionality of the concept and at the same time its damping characteristics were experimentally verified and compared with the predicted values. Due to the combination of numerical and analytical model, a very good agreement between prediction and experiment was achieved. Hence, an MR damper with a magnetic circuit made of Hiperco/Vacoflux 50 material was subsequently designed with a predicted dynamic range of 9.5 and a time response of less than 10 ms. The resulting total weight of the design is 0.68 kg. This design fully satisfies all requirements. When used in combination with semi-active control using the Skyhook algorithm, it is predicted to improve ride comfort by 28 %. The potential to use the proposed MR damper is with the increasingly widespread electric bicycles mainly due to the higher weight in conjunction. At the same time, however, the possibility of using it on a regular bicycle is not excluded. Semi-active suspension is a new and not yet widely used technology in cycling and has the potential to reach a new range of consumers. Considering all the advantages and disadvantages, it can be concluded that the proposed MR shock absorber allows to improve the rideability of mountain bikes both in terms of ride comfort, wheel traction or in the form of reduced energy expenditure during pedalling due to energy absorption by the suspension.
Keywords:
magnetorheological damper; mountain bike; semi-active suspension; Skyhook; suspension fork
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/207590