Original title:
Hala pro strojírenskou výrobu
Translated title:
Hall for Engineering Production
Authors:
Slezák, Jaroslav ; Pilgr, Milan (referee) ; Karmazínová, Marcela (advisor) Document type: Bachelor's theses
Year:
2022
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta stavební Abstract:
[cze][eng]
Cílem bakalářské práce bylo provést návrh a posouzení ocelové dvoulodní haly pro strojírenskou výrobu v Rajhradě. Hala má obdélníkový půdorys o šířce 32 m (20 m a 12 m) a délce 63 m. Celková výška hlavní lodě je 13,5 m. V hale pojíždí jeden mostový jeřáb o nosnosti 5 t a rozpětí 19 m. Objekt bude zastřešen sedlovou střechou se sklonem 5 %. Modulová vzdálenost příčných vazeb je 6 m. Nosná konstrukce je tvořena příhradovými vazníky, plnostěnnými sloupy, ztužidly a plnostěnnými vaznicemi. Pro stanovení vnitřních sil na jednotlivých konstrukčních prvcích byl využit program RFEM.
The aim of the bachelor thesis was to design and assess a steel two-nave hall for engineering production in Rajhrad. The hall has a rectangular plan with a width of 32 m (20 m and 12 m) and a length of 63 m. The total height of the main nave is 13.5 m. One bridge crane with a capacity of 5 t and a span of 19 m runs in the hall. The building is be covered with a gable roof with a pitch of 5 %. The modular spacing of the main trusses is 6 m. The superstructure consists of truss girders, full-wall columns, bracings and full-wall purlins. The RFEM program was used to determine the internal forces on the individual structural elements.
Keywords:
Bachelor thesis; bracing; bridge crane; column anchorage; crane runway; main truss; purlin; steel; steel structure of the hall; truss girder; bakalářská práce; jeřábová dráha; kotvení; mostový jeřáb; ocel; ocelová konstrukce haly; příhradový vazník; příčná vazba; vaznice; ztužidlo
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/206802