Original title:
Výroba závitů závitníky
Translated title:
Production of threads with taps
Authors:
Juránek, Martin ; Dvořák, Jaromír (referee) ; Píška, Miroslav (advisor) Document type: Bachelor's theses
Year:
2021
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Tato bakalářská práce se zabývá problematikou výroby závitů závitníky. V úvodu práce jsou stručně popsány využití závitů ve strojírenství, geometrie závitu a základní typy závitů. Dále práce pokračuje popisem používaných metod výroby závitů a kontrolou funkčnosti závitů. Práce se rovněž zabývá popisem druhů závitníků, nástrojových materiálů a popisem tří nejpoužívanějších druhů povlaků u závitníků. V experimentální části se řeší otázka, zda silnější vrstva povlaku TiN vede k prodloužení životnosti nástroje. V experimentu byly použity dva typy závitníků. Jeden typ závitníků měl tloušťku povlaku 3-4 m a druhý měl tloušťku povlaku 5-6 m. V experimentu byl měřen řezný moment v závislosti na čase. Naměřená data byla zpracována a následně bylo bylo vyhodnoceno, zda silnější vrstva povlaku vedla ke snížení opotřebení břitu nástroje a ke zvýšení životnosti nástroje.
This Bachelor thesis deals with the issue of production threads with taps. The introduction of th work briefly describes the use of thread in machine-building, thread geometry and basic types of threads. The work goes on to describe the methods tapping and thread control function. The work also deals with the description of types of taps, tool materials and the description of the three most used types of coating in taps. The experimental part adresses the question of whether the thicker layerof the TiN coat leads to an extension of the tool life. Two types of taps were used in the experiment. One type of taps had a coating thickness of 3-4 m and the other had coating thickness of 5-6 m. The experiment included measuring of time-dependent torque. The measured data were processed and subsequently evaluated whether the thicker coating layer resulted in reduced tool wear and increased tool life.
Keywords:
coat; production of threads; tap; thread; povlak; výroba závitů; závit; závitník
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/197211