Original title:
Most v obci Lipová Lázně
Translated title:
Bridge in Lipová Lázně village
Authors:
Christ, Roman ; Bezručová, Kristína (referee) ; Panáček, Josef (advisor) Document type: Bachelor's theses
Year:
2019
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta stavební Abstract:
[cze][eng]
Předmětem této bakalářské práce je navržení kolmé mostní konstrukce přes řeku Staříč v obci Lipová Lázně. Most převádí komunikaci II. třídy číslo 369 návrhové kategorie S7,5. Pro návrh jsou zpracovány tři návrhy variant deskového mostu o jednom poli. Zvolená varianta je řešena pomocí dodatečně předpjaté desky obdélníkového průřezu výšky od 1000 mm do 920 mm po šířce a délce nosné konstrukce 20850 mm. Statický model je řešen jako prostě podepřená deska s délkou přemostění 18420 mm. Návrh byl proveden dle normy ČSN-EN 1992-2. Výpočet účinků zatížení byl proveden pomocí softwaru Scia Engineering 2019. Návrh a posudky konstrukce byly provedeny dle platných předpisů a norem.
The subject of this bachelor thesis is the design of a perpendicular bridge structure across the Staříč River in the village of Lipová Lazne. The bridge translates communication II. class number 369, design category S7,5. Three design variants of the plate bridge are elaborated on a single field. The chosen variant is solved by means of an additional prestressed plate of a rectangular cross-section of height from 1000 mm to 920 mm in width and length of the supporting structure 20850 mm. The static model is solved as a simply supported plate with a bridging length of 18420 mm. The design was executed according to the standard ČSN-EN 1992-2. Calculation of load effects was performed using Scia Engineering 2019 software. Design and design assessments have been carried out according to the applicable regulations and norms.
Keywords:
limit of applicability; limit state of loading capacity; load models; Prestressed concrete; single pole bridge; sizing; static calculation; dimenzování; jedno pólový most; mezní stav použitelnosti; mezní stav únosnosti; modely zatížení; Předpjatý beton; statický výpočet
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/179856