Original title:
Výroba řetězového kola
Translated title:
Production of chain wheel
Authors:
Haltmar, Vojtěch ; Štroner, Marek (referee) ; Lidmila, Zdeněk (advisor) Document type: Bachelor's theses
Year:
2019
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Bakalářská práce se zabývá návrhem výroby řetězového kola zápustkovým kováním. Kolo je vyrobeno z oceli jakosti C45 a je součástí převodového ústrojí stavebního stroje. Na základě požadovaných mechanických vlastností součásti a výrobní série, která činí 20 000 ks za rok, je pro výrobu navrženo zápustkové kování na tři operace. Polotovarem pro výrobu je přístřih o průměru 50 mm a délce 100 mm. Tvářecím strojem pro výrobu je svislý kovací lis LMZ 1600 P/SH o jmenovité síle 16 MN. K odstranění výronku a blány slouží ostřihovací lis LKOA 200 o jmenovité síle 2 MN. Kovací zápustky jsou vyrobeny z nástrojové oceli ČSN 19 650 a jsou zpracovány dle výkresové dokumentace. Závěr práce pojednává o porovnání výroby řetězového kola obráběním a zápustkovým kováním, přičemž při využití technologie zápustkového kování dochází k úspoře 42 Kč na jeden kus.
This bachelor’s thesis deals with the production of chain wheel using the method of die forging. The wheel is made of C45 steel and is a part of the transmission of construction machinery. Based on the required mechanical properties of the component and batch production which amounts 20,000 pieces per year, three operations die forging is proposed for the production. An intermediate good for the production of the wheel is a cylindrical block with a 50 mm diameter and length of 100 mm. The forming machine for the production is vertical forging press LMZ 1600 P/SH with the nominal force of 16 MN. The trimming press LKOA 200 with the nominal force of 2 MN is used to remove the excess material. Forging dies are produced from tool steel ČSN 19 650 and are based on the technical drawings. The thesis also compares the production of chain wheel by machining and die forging concluding that the use of die forging method saves an amount of 42 CZK per piece.
Keywords:
C45 steel; die; forging; forming force; volume forming; objemové tváření; Ocel C45; tvářecí síla; výkovek; zápustka
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/176696