Original title:
Měření elektrické rezistivity půdy
Translated title:
Measurement of electrical soil resistivity
Authors:
Matyska, Stanislav ; Topolánek, David (referee) ; Vyčítal, Václav (advisor) Document type: Master’s theses
Year:
2018
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií Abstract:
[cze][eng]
Tato diplomová práce se zabývá měřením elektrické rezistivity půdy. V teoretické části jsou popsány metody, kterými se rezistivita půdy měří – zvláště Wennerova metoda, která byla použita pro praktická měření. Dále je popsán jednovrstvý a dvouvrstvý model této metody. V práci je dále popsán postup měření rezistivity půdy pomocí přístrojů OMICRON CPC 100 a PU 193, které byly použity při měření. Pro ověření modelování dvouvrstvého modelu půdy je v teoretické části práce dále popsán postup modelování půdy za pomocí programu Ansys. V praktické části práce byla provedena měření ve třech lokalitách: Brno – Královo Pole; Hrušovany nad Jevišovkou – Pravice; Hustopeče nad Bečvou – Vysoká. Naměřené hodnoty byly zpracovány pomocí grafického uživatelského rozhraní (GUI) v programu Matlab, které bylo vyvinuto v rámci této práce. Z těchto hodnot byl pro každou lokalitu a oba měřicí přístroje zvlášť vytvořen vždy alespoň jeden dvouvrstvý model půdy – celkem bylo vytvořeno 12 modelů. Pro tyto modely byla následně simulována měření v Ansysu. Výsledky simulací byly poté zpětně srovnány s naměřenými hodnotami. Cílem této práce je tedy srovnání naměřených dat s daty získanými simulacemi a následný popis vhodnosti / nevhodnosti náhrady jednovrstvého modelu půdy dvouvrstvým pro daná měření.
This master’s thesis deals with the measurement of the electrical soil resistivity. In the theoretical part there are described the methods by which the soil resistivity is measured – especially the Wenner’s method, which was used for the practical measurements. Then there is also described the one-layered and the two-layered model of this method. Furthermore, there is described the procedure for the measurement of soil resistivity using the OMICRON CPC 100 and PU 193 instruments used in the measurement. To verify the modeling of a two-layered soil model, the theoretical part of the thesis describes the soil modeling process using the program Ansys. As for the practical part of the thesis, the measurements were carried out in three localities: Brno – Královo Pole; Hrušovany nad Jevišovkou – Pravice; Hustopeče nad Bečvou – Vysoká. The measured values were processed using the Matlab’s graphical user interface (GUI) that was developed within this thesis. From these values, at least one two-layered soil model was created for each location and both meters – a total of 12 models were created. For these models, measurements were simulated in Ansys. The results of the simulations were then compared with the measured values. The aim of this thesis is to compare the measured data with the data obtained by the simulations and subsequently to describe the suitability / unsuitability of the substitution of the one-layered soil model for the two-layered one for given measurements.
Keywords:
soil resistivity; two-layered model; Wenner's method; dvouvrstvý model; rezistivita půdy; Wennerova metoda
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/80787