Original title:
Vliv komponent jízdního kola na energetický výdej.
Translated title:
Effect of a bicycle's component on the energy expenditure
Authors:
Růžek, Ondřej ; Jindra, Matouš (advisor) ; Baláš, Jiří (referee) Document type: Bachelor's theses
Year:
2014
Language:
cze Abstract:
[cze][eng] Název: Vliv komponent jízdního kola na energetický výdej. Cíle: Cílem bakalářské práce je zjištění rozdílu energetického výdeje při rozdílném komponentním osazení rámu jízdního kola. Metody: Studie se zúčastnilo 6 probandů ve věku 25,5 ± 3,6 let. Energetický výdej byl zjišťován na základě množství nadechovaného kyslíku (O2) a vydechovaného oxidu uhličitého (VCO2). Pro měření byl použit analyzátor vydechovaných plynů MetaMax od společnosti Cortex a metoda spiroergometrie. Testovaní absolvovali dvě jízdy kadencí 95 ot/min. na jízdních kolech s rozdílnou komponentou (tlumič). Absolvovaná trasa měřila 750 m, vedla do svahu o sklonu 5ř± 2řa trvala 3 min. Výsledky: V naší práci jsme shledali, že rozdíly v energetické náročnosti jízdy na hard-tail kole oproti full-suspension jsou vzhledem ke standardní chybě analyzátoru vydechovaných plynů MetaMax® nevýznamné. Hodnoty VO2 v průběhu studie nepřekročily hranici 2 ml/kg/min pro shledání pravosti naší hypotézy. Jízda na kole s dvěma úrovněmi odpružení si v naší studii vyžádala na 750 m dlouhém a 3 minuty trvajícím úseku o náklonu 5ř± 2ř energetický výdej v průměrné hodnotě 161,23 ± 33,15 kJ, jízda na kole bez komponenty tlumiče pak 160,98 ± 24,10 kJ, což představuje navýšení o 0,15 %. Klíčová slova: jízdní kolo, energetický výdej, komponenty, odpruženíTitle: Effect of a bicycle's component on the energy expenditure Objectives: Aim of this bachelor's thesis is to determine the difference of energy expenditure in a different component mounting frame of the bicycle. Methods: The study involved 6 probands aged 25.5 ± 3.6 years. Energy expenditure was calculated on the basis of oxygen consumed (O2) and carbon dioxide exhaled (VCO2). To measure was used exhaled gas analyzer Metamax from Cortex and method spiroergometry. Probands completed two runs cadence of 95 rounds per minute on a bicycle with a different component (a shock). Completed line measured 750 meters, led to a gradient of 5 ř ± 2 řand lasts 3 minutes. Results: In our study we found that the differences in energy intensity during bicycling on a hard-tail bike compared to a full-suspension are due to the standard error of the analyzer exhaled gases Metamax® insignificant. VO2 values during the study period did not exceed the threshold of 2 ml /kg/min for the confirmation the authenticity of our hypothesis. Cycling with two shock-absorbers at a distance of 750 m long and 3 minutes remains segment with the inclination of 5 ř ± 2 ř cause energy expenditure in the average value of 161.23 ± 33.15 kJ versus bicycling without shock-absorber and 160.98 ± 24.10 kJ expenditure, which represents an...
Keywords:
bicycle; bike suspension; components; energy expenditure; energetický výdej; jízdní kolo; komponenty; odpružení
Institution: Charles University Faculties (theses)
(web)
Document availability information: Available in the Charles University Digital Repository. Original record: http://hdl.handle.net/20.500.11956/64277