Original title:
Vliv procesních podmínek a materiálu na mezní tvařitelnost zadaného dílce
Translated title:
Influences of process parameters and material on technological forming limits of given componenet
Authors:
Exnerová, Jitka ; Peterková, Eva (referee) ; Samek, Radko (advisor) Document type: Master’s theses
Year:
2015
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Diplomová práce je zaměřena na rozšiřování konců trubek. V práci jsou uvedeny teoretické poznatky, které se týkají zakončeni trubek plochým lemem a kuželem. Následují experimenty provedené s vlastním materiálem a nástroji vyrobenými dle návrhu autora. Experimenty výroby ploché příruby vedly k brzkému zakroužení konce vzorku. Experimenty s kuželovým zakončením přinesly hodnotné výsledky z hlediska porovnání teoretických a naměřených sil, rozloženi tlouštěk a využití deformační sítě ke stanovení napěťově-deformačního stavu. Rozsah rozměru kuželového zakončení byl omezen vznikem příčné vlny ve válcové části trubky.
Master s thesis is focused on flaring of tubes endings. There are also mentioned theoretical pieces of knowledge which relate to tubes endings by a flat edge and a cone. The following experiments performed with the own material and tools made by the author s design. Experiments in the production of the flat collar led to the speedy rotation of the sample ending. Experiments with the conical ending brought valuable results from the point of view of comparison of theoretical and measured powers, distribution of thicknesses and utilization of the deformation web to set voltage-deformation state. The dimension excent of the conical ending was limited by the formation of buckling in the cylindrical part of the tube.
Keywords:
conical collar; deformation web; flaring; flat edge; tube; deformační síť; kuželová příruba; plochý lem; rozšiřování; trubka
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/40122