Název:
Hydro-abrasive machining of rotating workpieces from graphite and aluminium alloy
Autoři:
Cárach, J. ; Hloch, Sergej ; Klich, Jiří ; Hlaváček, Petr ; Klichová, Dagmar Typ dokumentu: Příspěvky z konference Konference/Akce: Vodní paprsek 2015 - výzkum, vývoj, aplikace, Velké Losiny (CZ), 2015-10-06 / 2015-10-08
Rok:
2015
Jazyk:
eng
Abstrakt: The paper compares the quality of machined surface of graphite and aluminium alloy by abrasive water jet using the focusing tube with a diameter of df1 = 0.5 mm and df2 = 0.78 mm. The machining was carried out using the technology of rotating workpiece disintegration by abrasive water jet. Abrasive tangential water jet was used to carry out the experiment (water pressure p = 400 MPa). Workpieces were clamped in the rotating chucking appliance with rotation frequency n = 300 min-1. The change in focusing tube diameter caused the change in values of roughness parameters, and also caused the change of resulting shape of workpieces. Values of roughness parameters were measured using the MicroProf FRT optic profilometer.
Klíčová slova:
abrasive water jet; machining; roughness parameters Číslo projektu: ED2.1.00/03.0082, LO1406 (CEP) Poskytovatel projektu: GA MŠk, GA MŠk Zdrojový dokument: Vodní paprsek 2015 - výzkum, vývoj, aplikace, ISBN 978-80-86407-56-2
Instituce: Ústav geoniky AV ČR
(web)
Informace o dostupnosti dokumentu:
Dokument je dostupný v repozitáři Akademie věd. Původní záznam: http://hdl.handle.net/11104/0251859