|
|
The Swimming cetrum Brno Zidenice
Pleva, František ; ing.arch. Lukáš Ležatka, Ph.D (referee) ; Pavlovský, Tomáš (advisor) ; Petříček, Tomáš (advisor)
The main theme of this project is a concept of the Swimming centrer in Brno—Židenice. The plot in question is extremely complex. It is located on the edge of a hillside near the Health center at Viniční, which naturally dominates the area by the shape and size of its structure. The underlying idea was to use orthogonal shapes to create a building, that would not compete with the Health center but would add up to its surroundings instead. Every single part of the project was designed to delicately fit into given terrain and surroundings. Most of the functions of the building are set on the 1st floor (e.g. locker rooms, two bars, water world and wellness). The 1st underground floor features technical services rooms. On the 2nd floor, there is only a swimming pool and a terrace with whirlpools on one part of the roof. The roof top offers an excellent view on the city of Brno. South and west facades of the pool hall are made completely out of glass. It is covered by vertical curved aluminum lamellar system. That is because of the thermal technical requirements of the building, however, it is also a dynamic piece of the facade that adds up to aesthetic finish of the building. The construction is based on a combined system of monolithic reinforced concrete columns and walls and glue laminated timber beams and frames. The roofs are compact and green. In the part above the locker rooms is intense green roof planted intensively green fully-grown greenery.
|
|
|
Intenzive Urban Housing Brno
Giacintová, Sylva ; Urbášková,, Hana (referee) ; Menšíková, Naděžda (advisor)
The subject of this thesis is the architectural study of revitalization of a city block and its spatial structure. Selected part of city was solved already in previous project that preceded own thesis. Merger proposal will allow a larger number of different functions within the complex, which will ensure the residents to various forms of housing, services and employment and leisure activities. The studied area is located in the city of Brno-Veveří. Plan shape of the object based on the area in which the three parties connected to the access road. Mass and spatial design respects the surrounding buildings and uses the sidewalks along the whole of the area. The matrix of the object is divided by two axes passing through the object into three blocks linked by a courtyard. This creates a square with a water surface with the possibility of recreation and sitting under the trees. The shape of these three blocks is further formed in several height terraced layers. Do terraces are placed in the atrium and individual residential and office units have large windows and balcony available. This solution brings natural light into the interior while allowing illumination of the courtyard and surrounding objects within the chosen area. This spatial structure is horizontally divided by function. There are proposed underground public garage, arcade with shops, services, administration and housing. The exterior of the building is designed by combining brick facades and white plaster, which works like optically lighter impression of the building.
|
|
|
multi-functional building
Navrátil, Tomáš ; Komínková, Kateřina (referee) ; Čupr, Karel (advisor)
The Master’s thesis on the theme „Multi function house“ is drafted as a building documentation according to the relevant laws and standards. The project processes a documentation of a new multi fiction apartment house construction with overall 16 flats. Their sizes are from a flat 2+1 to a flat with 4 rooms and kitchenette. Every flat has a garage and a cellar in the first floor. In the house there are 2 offices with a capacity about 12 employees and also 3 commercial premises. Hairdressing parlor and an Apple store are going to by situated into two smaller premises. In the last premise with 263 m2 of floorspace there is going to be a cycling shop. The project is designed as a brick building without basement. The building has two parts with four floors and these parts are united by a single-storey part. The whole building is symetric. The roof is designed as a platform with tend of 3%. On top of the first floor there is going to be a vegetation roof and a roof teracce with a flagging. On the fourth floor there are going to be roof teracces with ceramic pavement. Over the fourth floor there is going to be a roof cllading laden by pebbles. The house is situated in the town Kroměříž, in the pacific neighbourhood near to the historical town center. The neighbourhood of the object is determined for a building-up of family houses. Nearby the house there is a primary school and an athletic ground. The brick object is designed by a construction system Livetherm on the wall footings. The ceiling constructions are from concrete. The Master’s thesis is made as a project realization of building construction part with studies and design fundamentals. The part of the thesis is also the thermal technical recognition, fire recognition of the object and concept of canalization.
|
|
|
Multifunctional house
Štrop, Jaroslav ; Donaťák, Vladislav (referee) ; Donaťáková, Dagmar (advisor)
Master´s thesis of Multifunctional house is compile in project documentation by legislation in force. Design object is situated on plats 877/1, 877/2 in Jičín. Building is divided on two parts – administrative section, determined for project-atelier and apartment section with five apartments. It is four-storey cellarless building with flat roof. The both sections have barrier-free access to object including parking and elevators. In apartment section is barrier-free apartment in downstairs. Project is compile including static analysis of connection girder, fire safety solution and thermal technical assessment.
|
|
|
5-Minutes Neighbourhood
Šrubařová, Jana ; Bukolský, Martin (referee) ; Menšíková, Naděžda (advisor)
The territory is located in the city of Brno, district Trnitá on the embankment of the river Svitava. The subject of the diploma thesis is the architectural study of the design of the urban spatial structure with intensive use of city urban area, designed in pre-diploma project, which preceded diploma thesis. The design will allow mixing of greater amount of different functions on a relatively small built-up area, which will reduce the requirements on transport and provide the inhabitant with various forms of housing, services and employment. The shape of object's ground plan is based on area, which is connected from three sides to access roads. The mass and spatial solution respects the surrounding buildings and uses existing bike trails and sidewalks in the southeastern part of the area. The basic matter of object is divided by three axes passing through the building, into three blocks linked by common internal block. This creates a square with a tree-lined atrium with seating under the trees. The shape of these three blocks is further formed by removing of the mass, which results into forming of atriums, terraces and balconies, which brings natural light into the interior while allowing illumination of the patio and surrounding buildings within the territory. This spatial structure is horizontally divided by functions. Designed here are underground public garages, passages with shops, services, administration / commerce and housing. Despite the diversity of functions, for the facade was chosen a unified character of white horizontal lines contrasting with the dark gray lines of windows and facade cladding.
|
|
|
Apartment Building in Kyjov
Jurutková, Zuzana ; Závorková, Kateřina (referee) ; Králová, Zuzana (advisor)
This master´s thesis solves the apartment building with – bakeshop. The are five floors in the apartment building. The building hasn´t any basement. There are fifteen flats in the building and one flat is barrier-free. The apartment building is designed in passive standard, it´s caused by the orientation to cardinal points, compact shape, extreme thicknesses of insulations, orientation of windows to the south-west and to the south-east, but also thanks to the climatic area.
|
|
|
Frýdek roofed grandstand
Kofler, Nikodém ; Horáček, Martin (referee) ; Pešek, Ondřej (advisor)
The work deals with a design of a steel structure of a grandstand with a roof at the football stadium in Frýdek-Místek. The floor plan dimensions are 50 × 14 m, the height is 16,4 m. The auditorium structure consists of lattice girders placed on main girders. Mono-pitched roof is supported by rods to columns. The construction material is S235 steel.
|
|
|
Apartment House Brno - Sadova
Annová, Denisa ; Ing.arch.Ludmila Manová (referee) ; Menšíková, Naděžda (advisor) ; Matějka, Libor (advisor)
The block of flats is located in Brno, urban district Královo Pole, locality Sadová. It contains 8 separate flats. The flats have various categories and there are also two barrier-free flats. The block of flats is composed of one block and this block has 3 above-ground and one underground floors. The garages and the technical room are at the underground floor. Typical for this building are spacious terraces and big windows which connect interior witch exterior. Parts of terraces are designed like an extensive green roof. The flats are in above-standard category. The goal of this project is a simple mass of neutral colors which utilises the quality topography of the building site to its maximum potential.
|
|
|
Embassy of the Czech Republic in Addis Ababa
Sál, Kristián ; Šubrt, Jan (referee) ; Dulenčín, Juraj (advisor) ; Bečkovský, David (advisor)
In my bachelor's thesis I dealt with the design of the Embassy of the Czech Republic in Addis Ababa, which is the capital of Ethiopia. The basic idea was to create the most compact building possible, which would take into account all specific requirements. In one building there are representative premises with facilities, consular and visa building, office building and residential building. All this is connected by a terrace, which responds to external roads. Only minimal buildings for local staff are completely separate.
|
|
|
Multifunktion building
Zeťka, Lukáš ; Párová,, Jitka (referee) ; Rusinová, Marie (advisor)
This master’s thesis focuses on the preparation of project documentation for construction of a four-storey multifunction building. The building is located in Říčany u Prahy. The longer facades of the multipurpose house are facing to the east and west and its gables are facing to the south and north. The building is divided by a staircase into two virtually identical parts. The perimeter wall on the ground floor is at its eastern facade recessed. This allowed to create a covered archway over the entrance the commercial part of the house. The surface of the facades of the second to fourth storey is divided by loggias and terraces. The commercial spaces are located on the ground floor and there is a total of 24 apartments on the rest of the storeys. The vertical supporting structures are made of the Porotherm system, the ceilings are made of precast reinforced concrete panels. The structure's roofing is a flat roof.
|
guest ::
