|
|
Arsenic and arsenic species cycle in environment
Ševčíková, Kateřina ; Sommer, Lumír (referee) ; Dočekalová, Hana (advisor)
This bachelor thesis, based mostly on literature retrieval, deals with monitoring of individual arsenic compounds in the environment and is also reviewing methods used for their analysis. The experimental part is focused on determination of various arsenic in the Oncorhynchus mykiss tissue by HPLC-UV-HG-AFS. Obtained results showed that the arsenic was present in the tissue of the Oncorhynchus mykiss in form of arsenobetaine, which is common for fishes and other aquatic animals and is not toxic even for consuments.
|
|
|
The issue of alkylderivatives of mercury in biotic matrices
Zajícová, Markéta ; Doležalová Weissmannová, Helena (referee) ; Vávrová, Milada (advisor)
Alkyl derivatives of mercury, especially methylmercury, bring a significant risk to the environment and the human population. Methylmercury is highly toxic compound, which have the potential to bioaccumulate and biomagnify in tissues of aquatic organisms. This diploma thesis deals with issues of alkyl derivatives of mercury in biotic matrices. The goal of this thesis was to analyze fish tissues. Fish were caught from the river Svratka at the inflow and at the outflow of wastewater treatment plant. Methylmercury was determined in fish muscles and skin. Total mercury was determined in fish muscles. The extraction based on acidic digestion in hydrochloric acid and subsequent extraction with toluene was used for isolation of methylmercury from fish tissues. There was used gas chromatography with electron capture microdetector for determination of methylmercury. Total mercury was determined by special analyzer AMA 254.
|
|
|
Modification of Diffusive Gradient in Thin Films Technique for Characterization of Environmental Systems
Gregušová, Michaela ; Sommer, Lumír (referee) ; Janoš, Pavel (referee) ; Dočekal, Bohumil (advisor)
Diffusive gradient in thin film technique (DGT) represents a relatively new approach for in situ determinations of labile metal-species in aquatic systems. The DGT device passively accumulates labile species from the solution while deployed in situ, and therefore contamination problems associated with conventional collection and filtration procedures are eliminated. This study deals with a possible modification of DGT technique. The key of using DGT technique for speciation analysis of metals is to find out suitable binding phase and diffusion layer. The new resin gel based on Spheron Oxin (5 sulphophenyl-azo-8-hydroxyquinoline) ion exchanger with a higher selectivity to trace metals than Chelex 100 could potentially provide more information on metals speciation in aquatic systems. The performance of this new binding phase was tested for the determination of Cd, Cu, Ni, Pb and U under laboratory conditions. The hydrogel layer based on poly(2-hydroxyethyl methacrylate) was synthesized and tested as a new diffusion gel for application in DGT technique.
|
|
|
Speciation analysis of selenium in selenized yeast
Motlová, Tereza ; Vitoulová, Eva (referee) ; Diviš, Pavel (advisor)
The aim of the theses was determination of selenium species in yeast Saccharomyces cerevisiae cultivated in medium with added inorganic form of selenium (Sodium Selenite). Concentrations of Sodium Selenite in cultivation medium were 0,1; 1; 10 and 100 mg.l-1. Cultivation was undertaken in fermenting tub for period of 72 hours. Cultivated yeasts were extracted by use of enzymes and subsequently the species of selenium in particular parts of yeasts were determined. In order to determine selenium species, the method of high-performance liquid chromatography in combination with atomic fluorescent spectrometer and technique of hydride generation was used. Having analysed different fractions of the yeasts Saccharomyces cerevisiae it was ascertained that during cultivation the sorption of selenium occurred in form of Se4+ in cell membranes while in cytoplasm no inorganic forms of selenium were found. Furthermore, it was stated that yeasts Saccharomyces cerevisiae are able to metabolically change inorganic forms of selenium to organic forms (selenomethionine), while these forms are present in cytoplasm and they are likely to be bound to proteinic structures of cell membranes. An increase of concentration of Se4+ in cell membranes could be observed as a result of increasing concentration of Sodium Selenite in cultivation medium. In proteinic structures the concentration of organic selenium forms increased only to concentration 10 mg.l-1 of Sodium Selenite in cultivation medium.
|
|
| |
|
|
Speciation analysis employing hydride generation
Matoušek, Tomáš
The lecture presented employing of different ways of hydride generation- selective generation, postcolumn generation and cryotrapping- useful of element speciation analysis. Examples from our laboratory covered applications from the field of clinical, food and natural water analysis.
|
|
|
UV-photochemical generation of volatile species of tellurium and other transition metals
Jeníková, Eva
This dissertation thesis is focused on UV-photochemical generation of volatile species of tellurium, ruthenium, rhenium and iridium coupled to methods of atomic spectrometry. In the first part, attention was paid to the optimization of parameters of UV-photochemical generation of volatile tellurium species and its application for speciation analysis of Te(IV) and Te(VI) in water samples. UV-photochemical generation was carried out in a UV-photoreactor, which consisted of a low-pressure mercury lamp wrapped with a polytetrafluoroethylene reaction coil that served as a reactor. Atomic absorption spectrometry with a continuum source of radiation and high resolution and atomization in a miniature diffusion flame were used to optimize the conditions of generation, which included the composition of the reaction medium, irradiation time and the addition of transition metals as modifiers. In order to achieve a higher sensitivity of determination, the generator was coupled to a triple quadrupole inductively coupled plasma mass spectrometer. Since efficient UV-photochemical generation of volatile species was achieved only from Te(IV), with no response from Te(VI), the feasibility of this technique for simple "non-chromatographic" speciation analysis was tested and a method for determination of Te(IV) and...
|
|
|
UV-photochemical generation of volatile species of tellurium and other transition metals
Jeníková, Eva ; Hraníček, Jakub (advisor) ; Šíma, Jan (referee) ; Kanický, Viktor (referee)
This dissertation thesis is focused on UV-photochemical generation of volatile species of tellurium, ruthenium, rhenium and iridium coupled to methods of atomic spectrometry. In the first part, attention was paid to the optimization of parameters of UV-photochemical generation of volatile tellurium species and its application for speciation analysis of Te(IV) and Te(VI) in water samples. UV-photochemical generation was carried out in a UV-photoreactor, which consisted of a low-pressure mercury lamp wrapped with a polytetrafluoroethylene reaction coil that served as a reactor. Atomic absorption spectrometry with a continuum source of radiation and high resolution and atomization in a miniature diffusion flame were used to optimize the conditions of generation, which included the composition of the reaction medium, irradiation time and the addition of transition metals as modifiers. In order to achieve a higher sensitivity of determination, the generator was coupled to a triple quadrupole inductively coupled plasma mass spectrometer. Since efficient UV-photochemical generation of volatile species was achieved only from Te(IV), with no response from Te(VI), the feasibility of this technique for simple "non-chromatographic" speciation analysis was tested and a method for determination of Te(IV) and...
|
|
|
Speciation analysis of chromium in particulate matter of urban dust
Rybínová, Marcela ; Rychlovský, Petr (advisor) ; Hraníček, Jakub (referee)
Anion-exchange chromatography with inductively coupled plasma - atomic emission spectrometry (ICP-AES) has been used for the speciation of chromium (Cr). Chromium speciation has attracted attention because of the different toxicity, Cr(III) is relatively non-toxic and Cr(VI) has been classified as a human carcinogen. The aim of the present study was to develop simple method for the speciation analysis of Cr (Cr(III) and Cr(VI)) in particulate matter of urban dust. A combination of 2% KOH + 3% Na2CO3 has been chosen as the optimal reagent for the extraction of chromium from particular matter. It was found that there was no conversion of Cr(VI) into Cr(III). The effect of separation parameters such as acidity of mobile phase was also studied. The detection limit for Cr(VI) was about 12 ng.ml-1 . Results for the determination of Cr(VI) were confirmed by the analysis of standard reference material (BCR CRM 545, Cr(VI) in welding dust loaded on a filter) with good agreement between certified (40,16 ± 0,60 μg.g-1 ) and found (37,83 ± 1,14 μg.g-1 ) values.
|
|
|
Contribution to optimization of parameters of speciation analysis of As based on selective hydride generation in direct transfer mode and detection by atomic absorption spectrometry
Vyvadilová, Tereza ; Dědina, Jiří (advisor) ; Korunová, Vlasta (referee)
The presented thesis deals with optimization of parameters speciation analysis based on a selective hydride generation in a direct transfer mode of hydrides and on-line atomization in an atomic absorption spectrometer. In the first part of the thesis processes during generation were investigated. Important indicator of a reactions taking place in a generator is volume of hydrogen (created by decomposition of NaBH4) which is subsequently introduced to the atomizer. In this part of the thesis a new approach to determine a flow rate of hydrogen delivered to the atomizator was developed. An influence of relevant paremeters of the atomizers and atomic absorption spectrometers on basic analytical characteristics of arsenic determination based on hydride generation was performed in the second part. Three atomic absorption spectrometers were used and three sources of radiation were compared. The most important analytic characteristic was the limit of detection which is influenced by standard deviation of measurement values of blank samples and by sensitivity. The best values of the limit of detection were achieved with electrodeless discharge lamps. Key words: hydride generation, arsenic, speciation analysis, atomic absorption spectrometry
|
guest ::
