National Repository of Grey Literature 116 records found  1 - 10nextend  jump to record: Search took 0.00 seconds. 
Control of conveyor belt for testing room
Lorenc, Michal ; Pásek, Jan (referee) ; Macho, Tomáš (advisor)
The work deals with programing of conveyor system, controlled by PLC. The first part is analysis of the controlled technology a describtion of required function. The following is an introduction to the programming environment, PLC, sensors, actuators and controls. Second part is a proposal for the solution of the function of the conveyor system and its implementation. Then the whole system is tested, evaluated and suggestions for improvement are submitted.
Testing equipment for function test of automatic standby unit
Dušek, Pavel ; Pásek, Jan (referee) ; Štohl, Radek (advisor)
This bachelor’s thesis is focused on the description of automatic transfer switch and designing a tester for automatic transfer switch MODI ZA made by OEZ s.r.o. The solution itself consists of creating the state diagrams of the function test steps, programming software for Simatic S7-1S200 PLC and Simatic KTP 400 control panel and creating a technical documentation containing the tester wiring diagram, and layout of the insides of the switchboard. It also contains the diagram explaining how to connect the automatic transfer switch MODI ZA to the tester.
The Application for the PLC Program Generation using TIA Openness
Janeček, Pavel ; Pásek, Jan (referee) ; Arm, Jakub (advisor)
This thesis focuses on creating an application that allows generation of PLC and HMI programs using TIA Openness. The application is programmed to separate logic from graphics, which is beneficial in case of a change of the visuals of the application. Generating programs is possible thanks to the XML transcription or by creating a configuration within the application guide. The generating is done by overwriting source XML files contained in the application library according to the selected configuration. The application was created with Framework Windows Forms in C#. A reference set of device modules has been created for PLC and HMI in the development environment of TIA Portal V15.1. The source XML files, on the basis of which the generating is carried out, were then obtained by exporting a reference set and placed into the application library. With a simulation tool Factory I/O and S-7 PLCSIM it was verified that the generated program is, thanks to the mapping of variables on pins of blocks, fully functional in manual mode. At the same time it was proved that it is possible to generate programs for different devices which signifies the versatile use of this application. The contribution of this work is the significant reduction of time when creating new PLC and HMI programs.
Evaluating production efectivity
Czipszer, Jiří ; Kaczmarczyk, Václav (referee) ; Pásek, Jan (advisor)
The master thesis deals with the issue of evaluation of efficiency and data collection of lines in production, using the APROL program from B\&R automation. The aim of this work is to create a program completed requirement, which is going to be compared with already implemented projects of the company and will serve to create a company standard. The first part is devoted to the description of the theory of this issue and used software. The second part describes the solution of the line simulator and the whole concept of collection and evaluation.
Virtual twin for testbed Industry 4.0
Husák, Michal ; Pásek, Jan (referee) ; Kaczmarczyk, Václav (advisor)
The goal of my master‘s thesis is to create a digital twin of a testbed Barman. The Barman is a school model of autonomous mixed drinks production line that demonstrates the principles of Industry 4.0. In the theoretical part of the thesis, the choice of a suitable tool for virtualization is discussed. The Tecnomatix Process Simulate and the Mechatronic Concept Designer module integrated in the NX platform is compared. The practical part of the work is divided into two phases. The first phase was about looking for a way to integrate the robotic SCARA manipulator. The second phase was focused on the virtualization of the cell Shaker in the latter of the tools mentioned before. This work is designed as a guide for creating and verifying the concept of a digital twin.
HMI application for Android using OPC UA
Hurník, Jakub ; Pásek, Jan (referee) ; Arm, Jakub (advisor)
This bachelor thesis deals with the connection of the laboratory model of the drilling machine, creating a model task for this model and implementing the Android operating system into Raspberry PI. The theoretical part describes the communication standard OPC UA and outlines the possibilities of creating the HMI application. The practical part includes creation of program for PLC in Tia Portal environment, implementation of Android to Raspberry PI, development of HMI application and functionality testing.
Design of mechanical, electrical construction and software equipment of autonomous cell "Ice crusher" for Industry 4.0 testbed.
Horák, Lukáš ; Benešl, Tomáš (referee) ; Pásek, Jan (advisor)
The goal of this bachelor thesis is design and construction of an autonomous cell on a production line with the purpose of being an „ice crusher“. The purpose of this cell is to be part of a Testbed. The cell will be controlled using a HMI touch panel and PLC 1200. Information about how much ice the cell should pour into a glass is stored in an NFC chip on the bottom of the glass. The first part of the thesis comprises of brief introduction to Industry 4.0 alongside with description of the default and current state of Industry 4.0 testbed. Another part describes mechanical and electrical design of the cell. Last part of the cell describes software of the cell alongside with description of testing and installing the cell to the testbed.
Design of mechanical, electrical construction and software equipment of autonomous cell "shaker" for Industry 4.0 testbed.
Karniš, Radim ; Benešl, Tomáš (referee) ; Pásek, Jan (advisor)
The aim of this Bachelor thesis is to design and build an autonomous cell called Shaker, which is a part of automatic bartender smart factory. The cell executes one action in the life of the product passing through a production line, namely the shaking of a beverage. All the steps in the process of design and implementation of the cell follow current trends of the fourth industrial revolution, which is the very cause of creation of the bartender. This thesis involves a complete description of the design, construction and documentation process of this device.
Design and implementation of control applications capable to connect laboratory MES system
Dušek, Jakub ; Pásek, Jan (referee) ; Kaczmarczyk, Václav (advisor)
The goal of this bachelor thesis is to understand the ISA-95 standard and the manufacturing executing system (MES) based on this standard. Control application of discrete manufacturing controlling for PLC is then created and applied on a school device model. The thesis explains the ISA-95 standard and its influence on MES. The division and functions of MES according to ISA-95 are further described and explained. The theoretical part, the application of discrete manufacturing controlling for PLC is implemented on a drill model, simulating a segment of drilling. Structure of the software has been implemented in a way to correspond to the requirements given by MES and to be easily built upon.
Automatic tester for quality control
Vítek, Radim ; Pásek, Jan (referee) ; Bradáč, Zdeněk (advisor)
The thesis deals with design and construction of device for automatic product inspection. Thesis describes methods for testing products during manufacture. Thesis describes their main advantages and disadvantages. The main part of this thesis is design of testing device. There is described method of designing this device. It describes design of software and hardware.

National Repository of Grey Literature : 116 records found   1 - 10nextend  jump to record:
See also: similar author names
1 Pásek, Jiří
Interested in being notified about new results for this query?
Subscribe to the RSS feed.