|
The influence of admixtures on the hydration of Calcium Aluminate phases
Skalík, Martin ; Másilko, Jiří (referee) ; Koplík, Jan (advisor)
This thesis focuses on the effect of admixtures on the hydration time and on the formation of hydration products of calcium aluminate cement and its phases. Three main calcium aluminate phases, CA, CA2 and C12A7, were prepared to study using a high temperature sintering method that was optimised to be as fast as possible. The admixtures used were LiCl, NaCl, sodium tetraborate and citric acid. Prior to the actual hydration, the optimization of the admixture dosage was performed by Vicat test on two commercial aluminate cements, Secar 71 and Secar 80. The hydration with the right amnout of admixtures was monitored by heat flow calorimetry. Hydration products were investigated by X-ray diffraction analysis, Fourier transform infrared spectroscopy and electron microscopy.
|
|
Using of X-ray for distribution analysis of electrodes for secondary cell application
Macháč, Milan ; Bača, Petr (referee) ; Chladil, Ladislav (advisor)
This diploma thesis is focused on in-situ analysis of the composition of the negative electrodes of second secondary cells with using X-ray radiation. The first part is dedicated to the theory of lead accumulators, including charging, discharging, battery components and individual degradation mechanisms. The main part of the thesis includes the preparation of electrochemical in situ XRD cells and following measurement of the growth of lead sulphate crystals on the OCV potential. Furthermore, the lead cell was subjected to the measurement of the cyclic voltammetry around the working point of the negative electrodes. From these measurements was evident gradual increase of the lead sulfate crystals. The analysis was supplemented with electron microscopy images. In addition, were evaluated the in-situ particle analysis of the LTO Sigma sample.
|
| |
|
Noise, Transport and Structural Properties of High Energy Radiation Detectors Based on CdTe
Šik, Ondřej ; Lazar, Josef (referee) ; Navrátil, Vladislav (referee) ; Grmela, Lubomír (advisor)
Poptávka ze strany vesmírného výzkumu, zdravotnictví a bezpečnostního průmyslu způsobila v posledních letech zvýšený zájem o vývoj materiálů pro detekci a zobrazování vysokoenergetického záření. CdTe a jeho slitina CdZnTe. jsou polovodiče umožnují detekci záření o energiích v rozsahu 10 keV až 500 keV. Šířka zakázaného pásma u CdTe / CdZnTe je 1.46 -1.6 eV, což umožňuje produkci krystalů o vysoké rezistivitě (10^10-10^11 cm), která je dostačující pro použití CdTe / CdZnTe při pokojové teplotě. V mé práci byly zkoumány detektory CdTe/CdZnTe v různých stádiích jejich poruchovosti. Byly použity velmi kvalitní spektroskopické detektory, materiál s nižší rezistivitou a výraznou polarizací, detektory s asymetrií elektrických parametrů kontaktů a teplotně degenerované vzorky. Z výsledků analýzy nízkofrekvenčního šumu je patrný obecný závěr, že zvýšená koncentrace defektů způsobí změnu povahy původně monotónního spektra typu 1/f na spektrum s výrazným vlivem generačně-rekombinačních procesů. Další výrazná vlastnost degenerovaných detektorů a detektorů nižší kvality je nárůst spektrální hustoty šumu typu 1/f se vzrůstajícím napájecím napětí se směrnicí výrazně vyšší než 2. Strukturální a chemické analýzy poukázaly, že teplotní generace detektorů způsobuje difuzi kovu použitého při kontaktování a stopových prvků hlouběji do objemu krystalu. Část mé práce je věnována modifikaci povrchu svazkem argonových iontů a jejímu vlivu na chemické složení a morfologii povrchu.
|
|
The Study of ZnO Crystal Growth in Supersaturated Alkaline Solution
Bannert, Tomáš ; Máca, Josef (referee) ; Chladil, Ladislav (advisor)
This thesis deals with the study of growth of zinc oxide crystals from supersaturated solutions using a scanning electron microscope and XRD methods. The work is divided into a theoretical and an experimental part. The theoretical part analyses issues related to the principle of operation of electrochemical cells with an emphasis on Ni-Zn batteries and phenomena limiting the life and efficiency of Ni-Zn batteries with a focus on phenomena that affect precipitation processes of zinc oxide crystals. It also analyses and compares the appropriateness of the methods that have been used to study the growth of the prepared zinc oxide crystals. The experimental part describes the preparation of a supersaturated solution, the process of each analysis and its evaluation. The results of each method are compared with the theoretical assumptions and among themselves. The experimental part also contains a chapter dealing with the design of in situ X-ray diffraction analysis methods of the obtained zinc oxide crystals.
|
|
Preparation and characterisation of ceramic electroactive materials for Na-ion batteries
Vaněk, Martin ; Libich, Jiří (referee) ; Čech, Ondřej (advisor)
Hlavním cílem této práce je charakterizace vzorků titanátů, jako materiálů pro sodíko-iontové (Na-ion) akumulátory. Syntéza některých vzorků je součástí této práce. Charakterizace je zaměřena na elektrochemické vlastnosti, složení a morfologii použitých materiálů. První část se zabývá lithium-iontovými (Li-ion) akumulátory. Byly vybrány, protože jsou ve vědeckých článcích dobře popsány a základní funkční princip je aplikovatelný také na Na-ion akumulátory. Materiály používáné pro katody, anody a elektrolyty následují po krátké části shrnující parametry a konstrukci Li-ion akumulátorů. Následující kapitola je zaměřena na sodíko-iontové akumulátory. Srovnání sodíku a lithia je následováno materiály používanými pro elektrody a elektrolyty (s důrazem na anodové materiály). Třetí část popisuje analytické metody použité pro charakterizaci elektrod a materiálů. Jedná se o elektrochemickou charakterizaci (cyklická voltametrie a galvanostatické cyklování s potenciálovým omezením), morfologii (rastrovací elektronová mikroskopie) a složení (X-ray difrakční spektroskopie). Poslední dvě kapitoly obsahují syntézu a charakterizaci sodného titanátu a charakterizaci dvou vzorků TiO2. Výsledky této práce jsou shrnuty v závěru.
|
|
XRD characterization of electrodes and electrode materials for electrochemical power sources
Klvač, Ondřej ; Chladil, Ladislav (referee) ; Čech, Ondřej (advisor)
The thesis describes available choices of methods for research of electrochemical power source electrode strcture by x-ray diffraction spectroscopy. At first there is a theoretical computation of difractogram. Then there are discussed possibilities of in-situ and ex-situ techniques as background research. Practical part of thesis compares theoretical assumptions to measurements of lithium and sodium cells, including analyze of crystallographic phases and lattice constants. As a conclusion, there are discussed possibilities of subsequent research.
|
| |
| |
|
Effect of pH of mixing water on hydration and mechanical properties of cement composites.
Bezděk, Ondřej ; Krátký, Josef (referee) ; Šiler, Pavel (advisor)
This master’s thesis is focused on the effect of mixing water pH value on hydration and mechanical properties of cement composites based on portland cement. Source material was CEM I 42,5 R. Hydration process was analyzed by isoperibolic calorimetry, X-ray diffraction analysis and differential thermal analysis. Compressive and flexural strength was examined as mechanical properties. The samples microstructure was observed by scanning electron microscopy. Influence of mixing water pH value on flexural and compressive strength, retardation of hydration and ratio of individual phases was shown.
|