Název: Infrared Thermography as a Visualization Tool of Flow Control by Vortex Generators
Autoři: Součková, Natálie ; Kuklová, J. ; Popelka, Lukáš ; Matějka, M.
Typ dokumentu: Příspěvky z konference
Konference/Akce: Colloquium Fluid Dynamics 2010, Praha (CZ), 2010-10-20 / 2010-10-22
Rok: 2010
Jazyk: eng
Abstrakt: This paper focuses on a suppression of the flow separation, which occurs on a deflected flap, by means of vortex generators (VG's). An airfoil NACA 63A421 with a simple flap and vane-type vortex generators were used. The investigation was carried out by using experimental and numerical methods. The data from the numerical simulation of the flapped airfoil without VG's control were used for the vortex generator design. Two sizes, two different shapes and various spacing of the vortex generators were tested. The flow past the airfoil was visualized through two methods, namely oil and infrared thermography visualization. The lift curves for both cases without and with vortex generators were acquired for a lift coefficient improvement determination. . The experiments were performed in closed circuit wind tunnels with open and close test sections. The improvement was achieved for several cases by means all of the applied methods.
Klíčová slova: flow control; infrared thermography visualization; vortex generators
Číslo projektu: CEZ:AV0Z20760514 (CEP), 1M06031 (CEP), GAP101/10/1230 (CEP), GA101/08/1112 (CEP), GA103/09/0977 (CEP)
Poskytovatel projektu: GA MŠk, GA ČR, GA ČR, GA ČR
Zdrojový dokument: Colloquium Fluid Dynamics 2010: Proceedings, ISBN 978-80-87012-27-7

Instituce: Ústav termomechaniky AV ČR (web)
Informace o dostupnosti dokumentu: Dokument je dostupný v příslušném ústavu Akademie věd ČR.
Původní záznam: http://hdl.handle.net/11104/0191198

Trvalý odkaz NUŠL: http://www.nusl.cz/ntk/nusl-42130


Záznam je zařazen do těchto sbírek:
Věda a výzkum > AV ČR > Ústav termomechaniky
Konferenční materiály > Příspěvky z konference
 Záznam vytvořen dne 2011-07-04, naposledy upraven 2024-01-26.


Není přiložen dokument
  • Exportovat ve formátu DC, NUŠL, RIS
  • Sdílet