Název: Crack Resistance Characterization in TiAl Intermetallics with Enhanced Toughness
Autoři: Dlouhý, Ivo ; Stratil, Luděk ; Fukutomi, H. ; Hasegawa, M.
Typ dokumentu: Příspěvky z konference
Konference/Akce: 2016 - International Workshop on New Methods of Damage and Failure Analysis of Structural Parts /7./, Yokohama (JP), 20161101
Rok: 2017
Jazyk: eng
Abstrakt: The paper is focused on the analysis of the role of lamellar microstructure in fracture performance of model TiAl intermetallic compound. Coarse lamellar colonies and, at the same time, fine lamellar morphology were prepared by compressive deformation at 1553 K (region of stable alpha phase in TiAl equilibrium diagram) followed by controlled cooling to 1473 K (region of alpha+gamma phase) with delay on this temperature and then cooling down. The fracture toughness was evaluated by means of chevron notch technique. In addition, because of enhanced toughness, crack resistance curves were obtained by load - unload technique of pre-racked beams, namely in two directions of crack propagation relative to lamellar structure. Extensive development of shear ligament toughening mechanism was observed in fracture surfaces leading to quite good fracture toughness thanks to the heat treatment applied.
Klíčová slova: Crack resistance; Fracture micromechanisms; Fracture toughness; Intermetallics; Shear ligament toughening; Titanium aluminides
Zdrojový dokument: Analysis of Damage Features and Failures for Structural Materials and Parts, ISBN 978-3-0357-1127-1, ISSN 1013-9826

Instituce: Ústav fyziky materiálů AV ČR (web)
Informace o dostupnosti dokumentu: Dokument je dostupný v příslušném ústavu Akademie věd ČR.
Původní záznam: http://hdl.handle.net/11104/0276617

Trvalý odkaz NUŠL: http://www.nusl.cz/ntk/nusl-373297


Záznam je zařazen do těchto sbírek:
Věda a výzkum > AV ČR > Ústav fyziky materiálů
Konferenční materiály > Příspěvky z konference