Název: Evaluation of thin discontinuities in planar conducting materials using the diffraction of electromagnetic field
Autoři: Savin, A. ; Nový, F. ; Fintová, Stanislava ; Steigmann, R.
Typ dokumentu: Příspěvky z konference
Konference/Akce: ModTech 2017 - International Conference on Modern Technologies in Industrial Engineering /5./, Sibiu (RO), 20170614
Rok: 2017
Jazyk: eng
Abstrakt: The current stage of nondestructive evaluation techniques imposes the development of new electromagnetic (EM) methods that are based on high spatial resolution and increased sensitivity. In order to achieve high performance, the work frequencies must be either radifrequencies or microwaves. At these frequencies, at the dielectric/conductor interface, plasmon polaritons can appear, propagating between conductive regions as evanescent waves. In order to use the evanescent wave that can appear even if the slits width is much smaller that the wavwelength of incident EM wave, a sensor with metamaterial (MM) is used. The study of the EM field diffraction against the edge of long thin discontinuity placed under the inspected surface of a conductive plate has been performed using the geometrical optics principles. This type of sensor having the reception coils shielded by a conductive screen with a circular aperture placed in the front of reception coil of emission reception sensor has been developed and 'transported' information for obtaining of magnified image of the conductive structures inspected. This work presents a sensor, using MM conical Swiss roll type that allows the propagation of evanescent waves and the electromagnetic images are magnified. The test method can be successfully applied in a variety of applications of maxim importance such as defect/damage detection in materials used in automotive and aviation technologies. Applying this testing method, spatial resolution can be improved.
Klíčová slova: Electromagnetic fields; Electromagnetic wave reflection; Electromagnetic waves; Geometrical optics; Image resolution; Nondestructive examination; Testing
Zdrojový dokument: MODTECH INTERNATIONAL CONFERENCE - MODERN TECHNOLOGIES IN INDUSTRIAL ENGINEERING V, ISSN 1757-8981
Poznámka: Související webová stránka: http://iopscience.iop.org/article/10.1088/1757-899X/227/1/012115/meta

Instituce: Ústav fyziky materiálů AV ČR (web)
Informace o dostupnosti dokumentu: Dokument je dostupný v příslušném ústavu Akademie věd ČR.
Původní záznam: http://hdl.handle.net/11104/0275985

Trvalý odkaz NUŠL: http://www.nusl.cz/ntk/nusl-373282


Záznam je zařazen do těchto sbírek:
Věda a výzkum > AV ČR > Ústav fyziky materiálů
Konferenční materiály > Příspěvky z konference