Název:
Effect of rivet holes on calibration curves for edge cracks under various loading types in steel bridge structure
Autoři:
Seitl, Stanislav ; Miarka, Petr ; Kala, Z. ; Klusák, Jan Typ dokumentu: Příspěvky z konference Konference/Akce: ICSI 2017 - International Conference on Structural Integrity /2./, Funchal, Madeira (PT), 20170904
Rok:
2017
Jazyk:
eng
Abstrakt: Attention has been paid to fatigue cracks in steel structures and bridges for a long time. In spite of efforts to eliminate the creation and propagation of fatigue cracks throughout the designed service life, cracks are still revealed during inspections. There is some limitation of crack sizes which are detectable on structure (from 2 up to 10 mm). Note that depending on the location of the initial crack, the crack may dominantly propagate from the edge or from the surface. The theoretical model of fatigue crack progress is based on linear elastic fracture mechanics. Steel specimens are subjected to various load types (tension, three- and four-point bending, pure bending etc.). The calibration functions for short edge cracks that are near the hole for a rivet or bolt are compared for various loads and the discrepancies are discussed.
Klíčová slova:
calibration curves; edge cracks; fracture mechanics; rivet holes Číslo projektu: GA17-01589S (CEP) Poskytovatel projektu: GA ČR Zdrojový dokument: 2nd International Conference on Structural Integrity, ICSI 2017, 4-7 September 2017, Funchal, Madeira, Portugal, ISSN 2452-3216
Instituce: Ústav fyziky materiálů AV ČR
(web)
Informace o dostupnosti dokumentu:
Dokument je dostupný v příslušném ústavu Akademie věd ČR. Původní záznam: http://hdl.handle.net/11104/0275699