Název: Erosion capability of ultra-high-speed continuous waterjet and pulsating waterjet: the comparison
Autoři: Sitek, Libor ; Hlaváček, Petr ; Klichová, Dagmar ; Trieb, F. ; Pude, F.
Typ dokumentu: Příspěvky z konference
Konference/Akce: Vodní paprsek 2017 - výzkum, vývoj, aplikace, Lednice (CZ), 20170913
Rok: 2017
Jazyk: eng
Abstrakt: Advantages and possibilities of continuous ultra-high-speed waterjets (with\npressures of 600 MPa and more) when cutting metals are well known to\nthe professional public both from scientific studies and from practice. In addition\nto efficiency increased as water pressure increases and reduced water\nconsumption, abrasive consumption can also be reduced in the case of abrasive\nwaterjet. Ultra-high-speed waterjet technology allows not only to cut metal sheets\nwith pure water, but also allows cutting of harder materials such as ceramics.\nDespite the initial suspicion and technical problems associated with the reliability\nand sealing of some hyperpressure elements, high-pressure devices generating\nwater pressures around 600 MPa are now commercially available. However, no\ncomparison has been made so far concerning the efficiency of these jets with\nacoustically modulated high-speed pulsating waterjets using relatively low\npressures and higher water flow rates when eroding metallic materials.\nThe article compares cuts made by pure ultra-high-speed waterjet generated at\nhyperpressures (from 500 to 800 MPa) with erosive capabilities of pulsating\nwaterjets generated on the contrary at water pressures in the order of tens of MPa\non three metallic materials (stainless steel, mild steel and copper) using the same\njet hydraulic power.
Klíčová slova: hydraulic power; hyperpressure; pulsating waterjet; ultra-high-speed waterjet
Číslo projektu: ED2.1.00/03.0082, LO1406 (CEP), TA04020986 (CEP)
Poskytovatel projektu: GA MŠk, GA MŠk, GA TA ČR
Zdrojový dokument: Vodní paprsek 2017 - výzkum, vývoj, aplikace, ISBN 978-80-86407-71-5

Instituce: Ústav geoniky AV ČR (web)
Informace o dostupnosti dokumentu: Dokument je dostupný na vyžádání prostřednictvím repozitáře Akademie věd.
Původní záznam: http://hdl.handle.net/11104/0274332

Trvalý odkaz NUŠL: http://www.nusl.cz/ntk/nusl-364653


Záznam je zařazen do těchto sbírek:
Věda a výzkum > AV ČR > Ústav geoniky
Konferenční materiály > Příspěvky z konference